• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.276-276
• /
• 2015

농경지에서의 액비 수요는 최근 증가하고 있으나 적정 액비시비량에 대한 기준과 사후 관리에 대한 명확한 기준이 없어 환경문제에 대한 고찰이 필요하다. 본 연구에서는 시험포장을 선정하고 논에서의 질소 및 인의 동태를 모니터링하고, 관개수, 배출수 및 침투수 중 영양물질 및 중금속 잔류 특성을 분석하였다. 시험구는 대조구(화학비료 표준시비구, A)와 양돈분뇨액비 표준시비처리구(B)로 구성하였으며, 기상관측 측정을 위하여 자동기상관측기, 유입량은 수도미터계량기로 관측하였으며, 시험포장으로부터 유출량을 측정하기 위하여 압력식수위계를 각 처리구별로 설치하였다. 침투에 의한 영양물질의 유출부하량 평가를 위하여 침투계 1조 및 중금속 포집이 가능한 ceramic porus cup 4조를 각 처리구별로 설치하였다. 2014년 6월 9일 써래질 후, 6월 19일 $15{\times}30cm$, 1주 당 3본씩 "동진벼"를 기계이앙 실시하였고, 대조구 A는 농촌진흥청의 추천시비량, 처리구 B는 지상분무방식(액비시비 후 경운을 하는 방식 및 관개수 공급 후 액비를 시비하는 희석식)을 적용하였다. 기비 시비일은 6월 6일, 분얼비 시비일은 6월 26일, 수비 시비일은 7월 30일이었다. 강우량 대비 유출량 비인 유출률은 0.03에서 0.91까지 나타났으며, 담수의 수질조사는 평시 조사로 주 1회 실시하고 있으며, 분석결과는 SS의 경우 처리구 B가 상대적으로 높게 나타났다. 영양물질(T-N, T-P 등)의 경우는 대조구 A에서 꾸준히 높은 농도를 보여주고 있으며 이들 농도는 시비 시기에 따라 첨두값이 다르게 나타났다. 특히 $TH_3-N$의 경우 휘발성이 강하기 때문에 처리구 B에서 매우 낮은 값을 보여주었다. 유출수의 화학성분 분석결과는 완효성인 화학비료의 특징으로 전체적으로 대조구 A에서 수질농도가 높게 나타났으며, BOD의 경우는 처리구 B에서 높게 나타났다. 침투수의 T-N은 대조구 A에서 상대적으로 높은 값을 보여주고 있으며 이는 $TH_3-N$의 휘발에 영향을 받는 것으로 보이며, $NO_3-N$은 처리구 B에서 더 높게 나타나 토양중으로 침출되는 양이 많은 것으로 나타났다. 본 연구는 액비시용에 따른 농경지 위해성 평가와 관리방안 개발을 위한 1차년도의 연구 성과로서 지속적인 모니터링을 통하여, 향후 새만금 유역내 축산밀집지역에서 나타날 수 있는 축산분뇨 관리정책 개발의 기초자료로 활용될 것으로 기대한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.326-331
• /
• 2018

Evaporative humidification using a humidifying element is used widely for the humidification of a building or a data center. The performance of a humidifying element is commonly expressed as the humidification efficiency, which is assumed to be independent of the air temperature or humidity. To verify this assumption, a series of tests were conducted under two air conditions - data center ($25^{\circ}C$ DBT, $15^{\circ}C$ WBT) and commercial building ($35^{\circ}C$ DBT, $21^{\circ}C$ WBT) - using humidifying elements made from cellulose/PET and changing the frontal air velocity from 1.0 m/s to 4.5 m/s. Three samples having a 100 mm, 200 mm, or 300 mm depth were tested. The results showed that the humidification efficiency is dependent on the air condition. Indeed, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. This suggests that a proper thermal model should account for the inlet area, where the amount of moisture transfer may be different from the other part of the humidification element. As the depth of the element increased from 100 mm to 200 mm, the humidification efficiency increased by 29%. With further increases to 300 mm, it increased by 42%. On the other hand, the pressure drop also increased by 47% and 86%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.258-264
• /
• 2018

In this study, the improved performance of sprayed green soil was evaluated by incorporating functional additives. The optimal mixing ratio of the thickener and super-absorbent polymer, as an additive for moisture supply to the growth of plants within the range of mixing ratios that gives sufficient strength of green soil, was 5% and 1%, respectively. Using Portland cement as a main binder, the pH of the green soil was 9.1. To solve this alkali problem, the mixing proportion was improved so that the pH of the green soil was approximately 7.2 by mixing more than 10% of the chelate resin. The soil conductivity was measured to be 280 ~ 350mS/m under all the mixing conditions. This satisfied the criterion of less than 1000mS/m on the slope surface. As a result of measuring the soil hardness of the green soil prepared under the optimal mixing conditions of functional additives, it satisfied the criteria of 18 ~ 23mm when sprayed under a 1 bar pressure. The rebound rate was less than 15% when spraying green soil on a 75 % slope, and the hardness of the sprayed green soil was more than 18 mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.331-346
• /
• 2023

Recently, green processes that can be directly used in an energy-efficient and electrified society to achieve carbon neutrality are attracting attention. Existing heat and pressure-based desalination technologies that consume tremendous amounts of energy are no exception, and the growth of next-generation electrochemical-based desalination technologies is remarkable. One of the most representative electrochemical desalination technologies is electrochemical ion separation (EIONS) technology, which includes capacitive desalination (CDI) and battery desalination (BD) technology. In the research field of EIONS, various system applications have been developed to improve system performance, such as capacity and cyclability. However, it is very difficult to understand the meaning and novelty of these applications immediately because there are only a few papers that summarize the research background for domestic readers. Therefore, in this review paper, we aim to describe the technological advances and individual characteristics of each system in clear and specific detail about the latest EIONS research. The driving principle, research background, and strengths and weaknesses of each EIONS system are explained in order. In addition, this paper concluded by suggesting the future development and research direction of EIONS. Researchers who are just beginning out in EIONS research can also benefit from this study because it will help them understand the research trend.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.91-101
• /
• 1993

To predict accurately the thermal hydraulic behavior of light water reactors during normal or abnormal operation, the accurate estimation of the void distribution is required. Up to date, many techniques for predicting void fraction of two-phase flow systems have been suggested. Among these techniques, the drift-flux model is widely used because of its exact calculation ability and simplicity. However, to get more accurate prediction of void fraction using drift-flux model, slip and flow regime effects must be considered more properly In the drift-flux method, these two effects are accounted for by two drift-flux parameters ; $C_{o}$ and (equation omitted). At earlier stage, $C_{o}$ is measured in a circular tube. In this study, $C_{o}$ is experimentally determined by measuring local void fraction and vapor velocity distribution in a rectangular subchannel having 4 heating rods which simulates nuclear subchannels. The measurements are peformed with two-electrical conductivity probes which are known to be adequate for measuring local parameters. The experiments are performed at low flow rate and the system pressure less than 3 atmo spheric pressure. In this experiment, (equation omitted), is not measured, but quoted from well-known empirical correlation to formulate $C_{o}$. Finally, $C_{o}$ is expressed as a function of channel averaged void fraction. fraction.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.7
• /
• pp.73-83
• /
• 2006

The behaviour characteristics of Granular Compaction Pile (GCP) are mainly governed by the lateral confining pressure mobilized in the soft soil matrix to restrain the bulging failure of the granular compaction pile. The GCP method is most effective in soft soil with undrained shear strength ranging $15{\sim}50kPa$. However, the efficiency of this method reduces the more compressible soil conditions, which does not provide sufficient lateral confinement. In the present study, the GCP method reinforced with uniformly graded permeable concrete is suggested for the extension of application to the soft ground. Also, large triaxial compression tests are conducted on composite-reinforced soil samples for verification of availability of the suggested method and the settlement estimation method of the reinforced GCP is proposed. Furthermore, for the verification of the proposed method, predicted settlements by the proposed method are compared with results of 3-dimensional numerical analyses. In addition, parametric studies are performed together with detailed analyses of relevant design parameters.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.7-15
• /
• 2023

The electric submersible pump (ESP) has been operating in production wells around the world because of its high applicability and operational efficiency among artificial lift techniques. When operating an ESP in a reservoir, variables such as temperature, pressure, gas/oil ratio, and flow rate are factors that affect ESP performance. In particular, free gas in the production fluid is a major factor that reduces the life and operational efficiency of ESP. This study presents the flow loop system which can implement the performance and damage tests of ESP considering field operating conditions to quantitatively analyze the variables that affect ESP performance. The developed apparatus in an integrated system that can diagnose the failure and causes of ESP, and detect leak of tubing by linking ESP and tubing as one system. In this study, the flow conditions for stable operation of ESP were identified through single phase and two phase flow experiments related to evaluation for the performance of ESP. The results provide the basic data to develop the failure prediction and diagnosis program of ESP, and are expected to be used for real-time monitoring for optimal operating conditions and failure diagnosis for ESP operation.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2023

In general, electric submersible pumps (ESPs), which have an average life of 1.0 to 1.5 years, experience a decrease in performance and a reduction in life of the pump depending on oil and gas reservoir characteristics and operating conditions in wells. As the result, the failure of ESP causes high well workover costs due to retrieval and installation, and additional costs due to shut down. In this study, a flow loop system was designed and established to predict the life of ESP in long­term operation of oil and gas wells, and the life cycle data of ESP from the time of installation to the time of failure was acquired and analyzed. Among the data acquired from the system, flow rate, inlet and outlet temperature and pressure, and the data of the vibrator installed on the outside of ESP were analyzed, and then the performance status according to long-term operation was classified into five stages: normal, advice I, advice II, maintenance, and failed. Through the experiments, it was found that there was a difference in the data trend by stage during the long­term operation of the ESP, and then the condition of the ESP was diagnosed and the failure of the pump was predicted according to the operating time. The results derived from this study can be used to develop a failure prediction program and data analysis algorithm for monitoring the condition of ESPs operated in oil and gas wells.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.551-561
• /
• 2019

The purpose of this study was to investigate the relationship between entrance exam stress and oral care self-efficacy in girls high school. From June to July 2018, A self-reported questionnaire was administered to 192 high school students in the G area. The data were analyzed for independent t-test, one-way ANOVA and Pearson's correlation coefficient by using SPSS/WIN 21.0 program. Among the sub-sectors of entrance exam stress, exam tension/poor was the highest with 3.07 points, followed by Insufficient spare time stress 2.83 points, future uncertainty stress 2.57 points, and parent pressure stress 2.44 points. the variables related to exam tension/poor stress were academic performance (p<.01), family income level (p<.05), Subjective oral health status(p<.05), and daily brushing frequency(p<.01). The highest level of oral care self-efficacy was 3.13 points for brushing self-efficacy, followed by dental visits 2.80 points and interdental hygiene 2.64 points. As a result of analyzing the general characteristics and oral care self-efficacy, subjects related to brushing self-efficacy were subjective oral health status, caries snacking(daily), and caries drinks(daily)(p<.01). There were negative correlations between entrance exam stress and oral care self-efficacy. The higher the entrance stress, the lower the oral care self-efficacy. To prevent oral disease and increase oral care self-efficacy of students with high entrance stress, it is necessary to provide school oral health education programs that can facilitate oral health behaviors.