• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.37-45
• /
• 2017

Extinguishment of a burning solid propellant is difficult, however, dynamic extinction can be induced by fast depressurization in combustion chamber. This paper describes experimental results for the characteristics of extinguishment for composite solid propellants by rapid depressurization. For various composition of solid propellants, depressurization ratio which can induce extinguishment of combustion was obtained using experimental apparatus with rupture disk. Experimental results showed that particle size of oxidizer, mixing ratio of oxidizers with different particle size and contents of metal fuel can affect on the characteristics extinguishement for solid propellant.

• Journal of Energy Engineering
• /
• v.4 no.2
• /
• pp.288-296
• /
• 1995

촉매변환기용 모노리스에서의 속도변화에 따른 압력강하를 알아보기 위하여 풍동을 제작하여 실험하였다. 200 cpsi, 300 cpsi와 400 cpsi의 모노리스 담체에 대한 압력강하를 측정하였고, 듀얼베드 형태에서의 압력강하를 알아보기 위하여 200 cpsi, 300 cpsi와 400 cpsi들 중 두 개씩 조합하여 두 모노리스 담체의 사이 간격을 변화시켜가면서 압력강하를 측정하였다. 또한 많이 사용되고 있는 촉매가 담지된 400cpsi의 모노리스를 이용하여 촉매 담지에 대한 유동의 영향을 살표보았다. 모노리스 상·하류간의 압력강하는 공극율에 상관없이 공기와 유로벽과의 접촉면적에 따라 증가한다. 실험 결과로부터 제안된 상관관계를 상용하여 모노리스 형상에 따른 압력강하를 근사적으로 예측 할 수 있다. 듀얼베드 형태에서의 압력강하는 상류부와 하류부의 개별적인 모노리스의 압력강하와 두 모노리스 사이에서의 압력강하의 합으로 볼 수 있는데, 두 모노리스 사이에서의 압력강하는 무시할 만 하였다. 따라서 듀얼베드 형태의 전체적인 압력강하는 상류부와 하류부의 개별적인 모노리스에서 생기는 압력강하만의 합으로 구할 수 있다. 촉매가 담지되지 않은 모노리스의 측정결과로부터 제안된 상관관계를 촉매가 담지된 모노리스의 압력강하를 예측하는데 사용하기 위해서는 모노리스 길이를 원래길이의 1.25배로 수정하여 사용하여야 한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.31-34
• /
• 2001

지하 LPG 저장기지의 수벽시설이 저장공동 주변 암반에 미치는 영향을 진단하기 위해서 수벽시설의 주입압력을 강하시키면서 간극수압계와 관측공에서의 지하수두 변화를 모니터링하였다. 수벽시설의 관측지점에 대한 효율성은 수치해석으로부터 수벽시설과 관측지점간 매질의 확산능을 구함으로써 분석하였다. 확산능 산출결과를 검증하기 위해서 수벽시설의 압력강하에 따른 관측지점에서의 수두강하비와 수두강하율을 구하여 확산능 결과와 비교하였다. 비교결과, 확산능은 수두강하비, 수두강하율과 일관된 변화를 보여주었으며 확산능의 값이 클수록 수벽공의 압력변화에 따른 관측지점에서의 반응성이 양호함을 나타내었다

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.47-55
• /
• 2024

More than 100 liquefied hydrogen tanks are expected to be introduced in Korea by 2030. Since liquefied hydrogen is stored in a vacuum insulation structure tank at -253℃, there is a possibility of a major disaster in which the tank bursts if there is a problem with insulation. Therefore, the law stipulates that PRV should be installed as the last bastion. It is important to note that in the case of liquefied hydrogen, it becomes useless if the pressure drop of the pipe is ignored and the capacity is calculated incorrectly. In CGA S-1.3, the pressure drop rate of the PRV inlet and outlet pipes is set to less than 3% and less than 10%, respectively. However, there is an interdependence between the amount of pressure drop and the flow rate of the pipe, making it impossible to calculate these values at once. Therefore, we developed a simulator that calculates the pressure loss rate of PRV system using MATLAB/Simulink and evaluated the sensitivity of the pressure drop rate to design elements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.77-77
• /
• 2004

현재 플라스틱 제품의 재료 절감을 통한 원가 절감과 아울러 기계적 성질을 더 향상시키거나 유지하기 위한 초미세 발포 공법이 주목받고 있다. 이론 위해 많은 연구가 진행되어 왔으나 아직까지도 셀의 미소화, 균일화 그리고 표면 품위 등을 위한 지속적인 연구가 요구되고 있다. 초미세 발포 사출에서 셀의 형상에 영향을 주는 인자는 여러 가지이다 우선 사출 속도에 영향을 받으며, 사출 온도에 따라서도 많은 영향을 받는다.(중략)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.759-765
• /
• 2013

This study proposes the characteristics of the pressure drop in a compressible fluid through porous media for application to a porous injector in a liquid rocket engine in order to improve the uniformity of the drop size distribution and the mixing performance of shear coaxial injectors. The fluid through the porous media is a Non-Darcy flow that shows a Nonlinear relation between the pressure drop and the velocity at high speed and high mass flow rate. The pressure drop of the Non-Darcy flow can be derived using the Forchheimer equation that includes the losses of viscous and inertia resistance. The permeability and Ergun coefficient represented as a function of the pressure drop and pore size can be applied to the porous injector, where the fluid through the porous media is compressible. A generalized correlation between the pressure drop in relation to the pore size was derived.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.396-404
• /
• 2023

The blockage rate for three kinds of nets commonly used in agricultural facilities was assessed by using the image acquisition and its relevant processing. By using both empirical relations presented by Idel'chik and Richards and Robinson, and the blockage rate obtained from the image processing, the pressure drop through the nets was predicted and also compared with wind tunnel experiment results. The results of the study showed that the blockage rate of the net was discriminated according to such factors as the magnitude of nets, the existence of inside threads, the thickness and number of threads. In addition, the blockage rate for the incident angle of 0° when the wind blew at the front had the range of 0.22-0.29 (0.22-0.32 when considering whole incident angles from 0° to 45° by 15°). For the nets with the blockage rate of about 30% or below, the prediction by the empirical relations of by Idel'chik and Richards and Robinson showed a little higher pressure drop overall than that of the wind tunnel test, but the use of the empirical relations and the blockage rate could be thought of as providing effectively meaningful guidelines for the safe design of agricultural facilities including nets because the wind tunnel test has been tedious and expensive. Further research and potential application on the prediction technique of the pressure drop, regarding both a subtle deformation by the wind and manufacturing methods with regard to the level of knots and the existence of inside threads, needs to be done for the nets with higher blockage rate.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.86-95
• /
• 1996

Rotary disc ultrafiltration module(RDM) was developed for the separation of oil e$$\mu$sions. This module was devised to reduce the gel polarization phenomenon by decoupling the operation pressure and the surface velocity of solution in ultrafiltration(UF) processes. The rotary disc membrane consists of 3mm-thick ABS plate covered with UF membrane (UOP, U.S.A.). When the angular velocity($\omega$) was increased, the pure water flux was slightly decreased due to pressure drop caused by centrifugal force and slip flow at the surface of membrane. The pressure drop was proportional to the square of linear velocity(${\omega}r$). When the angular velocity was changed from 52.36rad/s to 2.62rad/s, the flux decline for 5% cutting oil in one-shaft RDM at $25^{\circ}C$ and 0.1MPa was 30.16%. In the lower concentrations, angular velocity tends to give less effect on the flux. Flux(J; $kg/m^{2} \cdot s$) in a rotating disc module is mainly a function of the bulk concentration($C_{B}$; %), the linear velocity(${\omega}r$; m/s) and the effective transmembrane pressure($\Delta P_{T}$ ; Pa). Using a modified resistance-in-series model, the flux data of cutting oil experiments were fitted to give the following equation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.72-79
• /
• 2003

A numerical calculation was conducted to estimate and to elucidate the role of the radiative heat flux from metal particles(Al, $Al_2O_3$) on the dynamic extinction of solid propellant rocket where the rapid depressurization took place. Anon-linear flame modeling implemented by the residence time modeling for metalized propellant was adopted to evaluate conductive heat flux to the propellant surface. The radiative heat feed back was calculated with the aid of a modified comvustion-flow model as well. The calculation results with the propellant of AP:Al:CTPB=76:10:14 had revealed that the radiative heat flux is approximately 5~6% of total flux at the critical depressurization rate regardless of chamber geometry (open or confined chamber). It was also found that the dynamic extinction in open geometry could be predicted at the depressurization rate about 45% larger with radiative heat feedback than without radiation. Thus, it should be claimed that even a small amount of radiative flux 5~6% could produce a big error in predicting the critical depressurization rate of the metalized propellant combustion.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.383-388
• /
• 2002

본 연구에서 구성한 바이오필터 시스템은 암모니아 가스를 대상으로 여러 조건에서 성능을 구명하였으며, 필터 설계시 중요 인자인 송풍량, 온도, 함수율, 압력강하, 체류시간들간의 관계를 구명하였다. 필터 내부의 온도 변화는 체류시간 및 압력손실에 거의 영향을 주지 않았으며, 함수율의 변화가 체류시간과 압력손실에 미치는 영향은 함수율 값이 증가할수록 체류시간은 감소했으며 반대로 압력손실은 증가하는 결과를 보였다. 이는 필터 내부의 공극률 변화로 생긴 결과라 판단된다. 송풍량은 바이오필터 효율에 절대적으로 영향을 미치며 송풍량이 증가할수록 체류시간은 감소하며 초기 제거율도 떨어진다. 미생물의 투입 여부에 따른 제거율은 미생물 접종을 하지 않은 경우 초기 흡착에 의한 영향으로 제거율이 높다가 시간이 지남에 따라 차츰 낮아져 90% 이하로 떨어지는 경향을 보였고, 균주를 접종한 경우에 있어서는 시운전 기간 동안 거의 100% 가까운 제거 성능을 보였다. 본 연구는 실험실에서 암모니아 가스만을 대상을 하여 실험하였다. 따라서 실제 축사에서 발생하는 다양한 성분의 악취와 농도에 대한 성능 검증과 개선에 대한 연구가 보다 장기간에 걸쳐 이루어져야 할 것이다. 또한 소요되는 에너지와 운전비용의 절감 등의 유지관리, 바이오필터와 타 방식과의 조합, 그리고 다양한 전처리 방식의 개발 등 여러 측면에서 바이오필터 성능 개선에 대한 연구가 병행되어야 할 것으로 판단된다.