• Title/Summary/Keyword: 압력감소

Search Result 2,158, Processing Time 0.032 seconds

정전 탐침을 이용한 산소 플라즈마의 음이온 발생 특성 연구

  • 김종식;김대철;김곤호
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.221-221
    • /
    • 1999
  • 산소 플라즈마의 음이온 발생 특성을 정전 탐침을 이용하여 관찰하였다. 탐침에 흐르는 음 전류는 전자 전류와 음이온 전류의 합으로 구성되며 음이온 속도는 전자 속도에 비해 작아 음이온의 발생 량이 증가함에 따라 음이온 전류의 크기는 감소하게 된다. 따라서 탐침에 흐르는 양 전류와 음전류의 비 Ii*/(Ie*+I-*)는 음이온의 발생량에 따라 변화하게 된다. 또한 플라즈마 전위와 부유 전위간의 전위차와 음 이온밀도와의 관계는 다음과 같은 관계식 e(Vp-Vf)/Te={3.35 + 0.5 ln$\mu$ - ln(ni/ne)]을 갖으며 이로부터 음이온의 밀도를 측정할 수 있다. 이들 두 가지 방법을 이용하여 정전 탐침에서 얻어지는 탐침 자료로부터 직접 플라즈마에서 음이온 발생에 관한 정성적인 특성 변화를 관찰할 수 있었다. 본 실험에서는 운전 압력(0.1-600mTorr)과 입력 전력(50-500W)에 따른 DC, ICP, CCP에서 발생하는 산소 음이온 플라즈마의 발생 특성을 분석하였다. 운전 압력이 증가함에 따라 음이온의 비율이 증가하다가 감소함이 관찰되었으며 400mTorr에서 최대 30%의 음이온 발생 비율을 갖음을 알 수 있었으며 더 큰 압력 하에서는 발생률이 점차 감소함을 관찰되었다. 또한 음이온의 발생 율은 입력 전력보다 운전 압력에 민감하게 변화하였다.

  • PDF

An Analysis of Attenuation Effect of Pressure Head Using an Air Chamber (공기실을 사용한 압력수두의 완화효과에 대한 분석)

  • Lee, Jae-Su;Yun, Yong-Nam;Kim, Jung-Hun
    • Water for future
    • /
    • v.28 no.5
    • /
    • pp.141-150
    • /
    • 1995
  • An air chamber is designed to keep the pressure from exceeding a predetermined value, or to prevent low pressures and column separation. Therefore, it can be used to protect against rapid transients in a pipe system following abrupt pump stoppage. In this research, an air chamber was applied to a hypothetical pipe system to analyze attenuation effect of pressure head for different air volumes, locations, chamber areas, coefficients of orifice loss and polytropic exponents. With an increase of air volume, the maximum pressure head at pump site is decreased and the minimum pressure head is increased. For different locations and areas of the chamber, the attenuation effects do not show much difference. Also, as the orifice loss coefficient increases, the maximum pressure head is decreased. For different polytropic exponents, isothermal process shows lower maximum pressure head than that of the adiabatic process.

  • PDF

Optical and Electrical Properties of Sputtered Al Doped ZnO Thin Films with Various Working Pressure (공정 압력에 따라 스퍼터된 Al 도핑 ZnO 박막의 광학적, 전기적 특성)

  • Kim, Deok Kyu;Kim, Hong Bae
    • Journal of the Korean Vacuum Society
    • /
    • v.22 no.5
    • /
    • pp.257-261
    • /
    • 2013
  • We have studied structural, optical, and electrical properties of the Al-doped ZnO (AZO) thin films using RF magnetron sputtering with various working pressure. To find optimal properties of AZO for transparent conducting oxides, the working pressure in sputtering process was varied as 0.07 Torr, 0.02 Torr, and 0.007 Torr, respectively. As working pressure increased, the crystallinity of AZO thin film was improved, the surface roughness of AZO thin film decreased. The transmittance of the film was over 80% in the visible light range regardless of the changes in working pressure. In case of 0.007 Torr, best electrical properties was shown due to the reduction of oxygen absorption by decreasing surface roughness.

Numerical Studies on the Effects of the Channel-Inlet-Pressure Difference in the Pressure-Retarded Osmosis (PRO) Power System (압력지연삼투(PRO) 발전 시스템에서 채널 입구 압력차의 영향에 대한 수치해석적 연구)

  • Hong, Sung Soo;Ryoo, Won;Chun, Myung-Suk;Chung, Gui Yung
    • Korean Chemical Engineering Research
    • /
    • v.52 no.1
    • /
    • pp.68-74
    • /
    • 2014
  • In the spiral wound module of the pressure-retarded osmosis (PRO) system for the salinity gradient power generation, effects of the inlet pressure differences between feed-channel and draw-channel were studied. Fluxes of water and solute through membrane and power were estimated. The water flux through membrane decreased along the x-direction and increased along the y-direction with the increase of inlet pressure differences between two channels. On the other hand, the solute flux through membrane showed the opposite trend. The concentration of flow in the feed-channel increased a lot along the y-direction and that in the draw-channel decreased along the x-direction. In our system, for the inlet pressure differences of 1~11 atm, the flow rate in the feed-channel decreased about 8~13% and that in the draw-channel increased by the same amount. The power density increased and then decreased with the increasing inlet pressure difference.

인공아가미기술

  • Heo, Pil-Woo
    • 기계와재료
    • /
    • v.22 no.3
    • /
    • pp.110-119
    • /
    • 2010
  • 인공아가미기술은 수중에서 용존산소를 분리하여 호흡에 사용하는 것을 말한다. 이를 위해 아가미의 특성을 분석하고 현재까지 제시되고 있는 용존산소의 분리를 위한 메커니즘 특성을 기술하였다. 즉 압력 강하, 캐리어 용액, plastron의 관점에서 용존산소를 분리하여 수중 호흡에 사용하는 부분에 대해 소개하였다. 또한, 현재 진행 중인 용존산소 분리실험장치를 이용한 수중 용존산소의 감소특성을 제시하였다. 압력을 감소함에 따라 용존산소량이 비례하여 감소함을 알 수 있었다. 중공사막에 공급되는 유량을 증가시키면 용존산소량의 감소가 둔화되는 특성을 나타낸다. 휴대형 인공아가미기술은 물놀이와 관련된 레저활동의 안전도구로 활용이 가능하고, 스쿠버다이버, 마이크로연료전지, 인공부레, 잠수함 그리고 인공 폐 분야에 사용이 기대된다.

  • PDF

압력용기에서의 중성자 조사량 평가 및 감소방안 연구

  • 김동규;김명현
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.10a
    • /
    • pp.103-108
    • /
    • 1997
  • 압력용기로의 속중성자 조사량 평가를 4군 노달 노심해석코드로 수행하였다. 이 코드는 MCNP에 비해 정확성은 떨어지나, 핵연료 연소의 효과나 핵연료 장전 모형의 영향을 쉽게 고려할 수 있었다. 속중성자 조사량 감소 방안으로서 반사체 차폐 구조물을 설치하는 방안과 노심외곽에 대체 핵연료 집합체를 장전하는 방안을 비교하였다. 신형원전의 경우 가장 효과적인 방안은 물 반사체 영역에 금속 차폐 구조물을 설치하는 것이나 운전중인 원자로의 경우 비록 주기길이의 감소와 핵연료 비용의 증가는 있으나 속중성자 감소 효과에 있어서는 대체 핵연료 집합체의 장전이 대안일 수 있다.

  • PDF

Isotropic Compression Behavior of Lawsonite Under High-pressure Conditions (로소나이트(Lawsonite)의 압력에 따른 등방성 압축거동 연구)

  • Im, Junhyuck;Lee, Yongjae
    • Economic and Environmental Geology
    • /
    • v.49 no.1
    • /
    • pp.23-30
    • /
    • 2016
  • Powder samples of natural lawsonite (Ca-lawsonite, $CaAl_2Si_2O_7(OH)_2{\cdot}H_2O$) was studied structurally up to 8 GPa at room temperature using monochromatic synchrotron X-ray powder diffraction and a diamond anvil cell (DAC) with a methanol : ethanol : water (16 : 3 : 1 by volume) mixture solution as a penetrating pressure transmitting medium (PTM). Upon pressure increase, lawsonite does not show any apparent pressure induced expansion (PIE) or phase transition. Pressure-volume data were fitted to a second-order Birch-Murnaghan equation of state using a fixed pressure derivative of 4 leading to a bulk modulus ($B_0$) of 146(6) GPa. This compression is further characterized to be isotropic with calculated linear compressibilities of ${\beta}^a=0.0022GPa^{-1}$, ${\beta}^b=0.0024GPa^{-1}$, and ${\beta}^c=0.0020GPa^{-1}$.

Effects of Pressure-Side Winglet at an Elevation of Tip Surface on the Tip-Leakage Flow and Aerodynamic Loss Downstream of a Turbine Blade Equipped with Pressure-Side Squealer Tip (압력면익단소익이 터빈 동익 압력면스퀼러팁 하류의 팁누설유동 및 압력손실에 미치는 영향)

  • Cheon, Joo Hong;Lee, Sang Woo
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.10
    • /
    • pp.645-651
    • /
    • 2016
  • Effects of pressure-side winglet width on the tip leakage flow and aerodynamic loss downstream of a turbine blade with a pressure-side squealer rim have been investigated for the tip gap-to-span ratio of h/s = 1.36%. The pressure-side squealer has a fixed height-to-span ratio of $h_p/s=3.75%$ and the pressure-side winglet, which is installed at an elevation of tip surface, has width-to-pitch ratios of w/p = 2.64%, 5.28%, 7.92% and 10.55%. The results show that with increasing w/p, aerodynamic loss in the passage vortex region decreases, whereas that in the leakage flow region increases. As a result, the mass-averaged loss coefficient all over the measurement plane tends to decrease minutely with the increment of w/p. It is concluded that the pressure-side winglet for the pressure-side squealer tip can hardly contribute to the tip-leakge loss reduction.

다목적실용위성 추진시스템의 추진제 소모율 분석

  • 김정수;한조영
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.8-8
    • /
    • 2000
  • 하이드라진 단기액체엔진을 장착하고 궤도에서 임무를 수행하고 있는 다목적실용 위성 추진시스템 궤도비행 초기운용 자료에 근거하여 추진제 소모율을 산정 한다. 추진시스템은 위성의 궤도각과 비행고도 조정을 위한 속도증분($\Delta$V) 및 자세제어를 위한 추력을 발생시킨다. 단기액체 추진시스템에서 추진제 소모량은 추력기 밸브의 개폐시간에 비례하고 추력 생성 효율은 추진제의 연소기 유입압력에 종속한다. 일정질량의 가압 기체 압력에 의해 연료를 공급하는 추진시스템에서 잔류 추진제 량의 감소는 연소기 유입압력의 감소를 유발하고 추진기관의 효율을 저하시키는 요인으로 작용하여 임무말기로 진행함에 따라 동일한 운동량 생성에 보다 많은 연료소모가 이루어진다.(중략)

  • PDF

Influence of External Pressure to Abdominal Area on Abdominal and Lumbar Muscle Fatigue Index During Upper Extremity Exercise: A Pilot Study (상지운동 시 복부에 적용된 외부압력이 요부와 복부 근육 피로지수에 미치는 영향)

  • Ko, Eun-Hye;Cynn, Heon-Seock;Choi, Houng-Sik
    • Physical Therapy Korea
    • /
    • v.10 no.4
    • /
    • pp.23-31
    • /
    • 2003
  • 본 연구는 상지운동 동안에 복부에 적용된 압력이 요부와 복부의 근피로도에 미치는 영향을 알아보았다. 연구대상자는 성인 남자 5명이었다. 연구대상자가 10 repetitions maximun (RM) 무게의 아령을 이용하여 1분 동안 상지운동을 수행 시 0 mmHg, 저압(30 mmHg), 중압(70 mmHg), 고압(100 mmHg)의 외부 압력이 복부에 적용되었고, 복직근, 외복사근, 내복사근, 척추기립근에서 근전도 자료가 수집되었다. 주파수 분석을 통하여 적용된 압력에 따라 각각의 근육에서 초기 10초 구간과 말기 10초 구간의 중앙주파수로 피로지수를 측정하였다. 통계학적 분석방법은 반복측정된 이요인 분산분석 ($4{\times}4$)과 사후검정을 이용하였다. 그 결과 압력의 차이에 의한 주효과가 나타났으며, 사후검정결과 0 mmHg 압력에 비해 30 mmHg, 100 mmHg에서 각각 피로지수가 유의하게 낮았다(p=.04, p=.015). 본 연구의 결과를 통하여 복부에 적용된 압력 (30 mmHg, 100 mmHg)이 근육의 피로도를 감소시킬 수 있음이 나타났다. 요부벨트를 이용하여 작업을 수행할 때, 고유수용성 감각 입력을 증가시키고 재손상을 방지하는 목적이외에도 근피로도를 감소시킬 수 있다는 가능성을 알 수 있었다.

  • PDF