• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.80-85
• /
• 2013

Anionic polymerization of hexafluoropropylene oxide (HFPO) was investigated under various reaction conditions such as various hexafluoropropylene (HFP) oligomers composed of dimer and trimer, reaction temperatures, and feeding rates of hexafluoropropylene oxide monomer. HFP oligomer was synthesized from cesium fluoride (CsF) and HFP in tetraethyleneglycol dimethylether (TG). Under 5 g of CsF, 200 g of HFP, 10 g of TG, and reaction temperature $30^{\circ}C$, HFP dimer content in oligomer was relatively increased. HFPO oligomer with a high molecular weight ($M_w$ 3600) was synthesized in conditions of reaction temperature $0^{\circ}C$, HFP oligomer with 35.1% of dimer, and 1.85 g/min of HFPO feeding rate. Otherwise, chain transfer was increased under unoptimized reaction conditions. Consequently, it was found that reaction conditions impact chain propagation and chain transfer in the anionic polymerization of HFPO.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.143-148
• /
• 2018

Sodium silicate based silica aerogels are lower in cost than silica alkoxide based silica aerogels, but the demand is decreasing as their physical properties are lowered. In this research, acetonitrile as a drying control chemical additive (DCCA) is added in the sol state to improve the pore-structural properties of sodium silicate based silica aerogel by preventing the agglomeration of particles and cross-linked bond. The sodium silicate based silica aerogel by ambient pressure drying were prepared by sol-gel process. Acetonitrile/$Na_2SiO_3$ molar ratio of 0, 0.05, 0.1, 0.15, and 0.2 was added to the sol state. The physical properties of the final product were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda measurements and field emission scanning electron microscopy. It was confirmed that the sample with adding 0.15 molar ratio of acetonitrile and sodium silicate showed a high specific surface area ($577m^2/g$), a high pore volume (3.29 cc/g), and a high porosity (93%) comparable to the pore-structural properties of silica alkoxide based silica aerogels.

• Journal of the Korean Ceramic Society
• /
• v.29 no.6
• /
• pp.480-488
• /
• 1992

The sintering behaviors of seeded alumina from alkoxide were studied. Room temp. desiccated powder exhibited better sintering behavior due to its packing ability and powder activity. $\alpha$-Al2O3 2wt% seeded compacts sintered with 97.5%TD, 1~3${\mu}{\textrm}{m}$ diameters at 140$0^{\circ}C$, 2hrs. Fe-nitrate doped compacts resulted in enhanced initial sintering behavior due to ionic effects of Fe3+ but failed to refined microstructure.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.153-159
• /
• 1991

Polymeric alumina sol and polymeric silica sol were synthesized from aluminum sec-butoxide and tetraethyl orthosilicate, respectively as starting materials. A clear mullite sol was obtained by mixing these sols. When the mullite sol had a proper viscosity which was dependent on drying time, the fibers were fabricated by spinning. The optimum viscosity for fabrication of mullite fibers was 103-104 cps, and the fibers with various sizeswere made using the sols. The mullite was a major phase of the calcined fibers and the diameters of the fibers were about 50$\mu\textrm{m}$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1147-1155
• /
• 1996

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.367-376
• /
• 1992

The powder characteristics of seeded alumina prepared from alkoxide by sol-gel method were studied. When ${\alpha}$-Al2O3 seeded powders used, these ${\alpha}$ phase transformation temperatures decreased than those of unseeded powders by 110$^{\circ}C$ and fine powders under 0.1 $\mu\textrm{m}$ could be obtained. When Fe-nitrate added powders used, fast transformation rate resulted from ionic effects of Fe3+, but hard aggregated morphology exhibited. When ${\alpha}$-Al2O3 and Fe nitrate simultaneously added, these powders represented lower transformation temperature but resulted in microstructure with aggregated particles.

• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1233-1240
• /
• 1995

LAS system, which is difficult to be sintered, was densified by using the powder synthesized from metal alkoxides. Sinterability, thermal and mechanical properties were improved through synthesizing the complex oxide powder from the addition of Ge as an alkoxide. As a result, the synthesizing and sintering temperature of the LAS system lowered by about 10$0^{\circ}C$ and its modulus of rupture (MOR) increased twice higher compared to the sample from the oxide by the direct method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.34-34
• /
• 2003

산업의 발달로 인하여 자원재활용의 문제와 환경 오염 방지와 더불어 에너지 절약에 대한 중요성이 확대되면서 분리 고정을 이용한 환경 오염 방지 및 에너지 절약에 대한 관심이 확대되었다. 세라믹 필터는 열악한 환경에서의 적용 그리고 에너지 소모가 적은 장점을 가지고 있다. 여러종류의 재료들 중에서 기공의 제어가 용이한 알루미나 여과막은 보에하미트(${\gamma}$-AlOOH) 분말과 금속 알콕사이드(ATSB, aluminum tri-sec butoxide)를 사용하여 간단하게 제조할 수 있다. 알루미나는 열처리 론도에 따라 $\alpha$-A1$_2$O$_3$ 결정상 뿐만 아니라 몇 가지 준안정한 결정구조를 가진다. 보에마이트(${\gamma}$-AlOOH)는 45$0^{\circ}C$ 근처에서 미세한 기공을 가진 ${\gamma}$-A1$_2$O$_3$로 상전이 되는 것으로 알려져 있고, 120$0^{\circ}C$보다 낮은 온도에서 열처리하게 되면 미세구조의 변화는 일어나지 않고 약간의 입자 성장만을 수반하는 $\delta$-A1$_2$O$_3$ 또는 $\theta$-A1$_2$O$_3$으로 상전이가 일어난다. $\alpha$-A1$_2$O$_3$로의 상전이는 기공 크기의 변화와 vermicular구조를 가지는 비정상적인 입자성장을 수반하게 된다. 여과막은 기공크기와 분포를 제어하는 것이 매우 중요하므로, 상전이와 미세구조의 변화를 이해하는 것은 중요하다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.315-323
• /
• 1998

$TiO_2$films of rutile and anatase phase have been prepared on silica glass substrates by the sol-gel method using $Ti(i-OC_3H_7)_4$. The effect of additives on the polymorph of $TiO_2$film has been examined in view of degree of crystallization. Third-order nonlinear optical properties of the both film have been investigated by the third harmonic generation method. The measured 3rd order nonlinear optical susceptibility of rutile and anatase thin films were about $1.4{\times}10^{-12}$ and $9.7{\times}10^{-13}$ esu, respectively.

• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.691-697
• /
• 1999

TiO2 powder was adsorbed on the surface of mica using the heterocoagulation method in water TiO2 powder was prepared from hydrolysis of titanium-iso propoxide in a mixed solvent of anhydrous ethanol and water. When the molar ratio of water to titanium iso-propoxide was 0.25 monodispersed spherical TiO2 particles were obtained. The prepared TiO2 powder showed anatase phase after heat treatment at 50$0^{\circ}C$ for 2 h and then transformed to rutile phase after heat treatment at 100$0^{\circ}C$ for 2h. The iso-electric points of TiO2 and Mica were pH 3.9 and pH 3.25 respectively which were measured by the Z-potential analysis in water base. The maximum Z-potential difference between two powders was observed in the range of pH 3.6~3.7 TiO2 powder was adsorbed on the surface of mica by heterocoagulation method in pH 3.6~3,7 The properties of prepared TiO2 powder was haracterized by TG-DTA, XRD and SEM The morphology and thermal properties of TiO2-adsorbed mica were examined.