• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.599-605
• /
• 2012

The physicochemical properties such as surface hardness, solvent mechanical wear resistance, and resistance to scratch properties of poly(3,4-ethylenedioxythiophene) (PEDOT) thin film prepared by vapor phase polymerization (VPP) was effectively improved by post-treatment of various metal alkoxide sol solutions. Metal oxide layer derived from sol-gel process of metal alkoxide was generated on the PEDOT thin film layer by VPP, resulting in improving mechanical properties of the conductive thin films without any deterioration of their original surface resistance. Several kinds of silicone and titanium alkoxide derivatives with various functional groups were used as metal alkoxide sol sources. Among them, PEDOT-metal oxide composite thin film derived tetraethyl orthosilicate showed the best performance in the terms of surface resistance, transmittance, and various physicochemical properties. The effect of metal alkoxide content in washing solution, oxidant content and drying temperature have been investigated in order to optimize the various properties of PEDOT-metal oxide composite thin film.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.142-151
• /
• 1995

Complex alkoxides were synthesized using metal alkoxide method and were then hydrolyzed to prepare the precursors using sol - gel method. Then, the precursors were calcined in order to make barium hexaaluminate. Factors affecting the material properties of the barium hexaaluminate precursors were studied and they are the kinds and amount of alcohols, and reaction time. In addition, in the course of hydrolysis, the effects of the amount of water, reaction temperature and aging time were also studied in terms of the specific surface area and average particle size of the barium hexaaluminates.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.15-22
• /
• 2019

There are three hydrometallurgical methods by which pure alumina can be prepared, such as hydrolysis of aluminum alkoxides, thermal decomposition of ammonium alum and thermal cracking of ammonium aluminum carbonate (AACH). The effect of solution pH and temperature and the nature of the impurities on the phase transition and the purity of the alumina thus produced was investigated. Hydrolysis of aluminum alkoxides and thermal decomposition of ammonium alum produce ${\alpha}$ and ${\gamma}$ alumina, while only ${\alpha}$ alumina can be produced by thermal cracking of AACH.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.240-253
• /
• 1993

Silicon alkoxides are used as a raw materials of silica fibers, coating films and fine ceramics. Specially, the alkoxides have been confirmed the best raw material for VLSI thin film of computors in recent years. Because, the impotance of silicon alkoxides are increasing more and more now a days. And so, in thls report the synthetic methods, reaction mechanism, application fields of silicon alkoxides are summerized. Also, the results of our research and technical problems of silicon alkoxide preparation are introduced briefly.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.348-354
• /
• 1996

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.196.2-196
• /
• 2000

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.205-210
• /
• 2013

For the synthesis of crystalline LAS glass by sol-gel method, the effect of operation conditions including metal alkoxide ratio, nucleating agent composition and heat treatment on the crystalline properties was experimentally investigated. The gelation time and crystallization temperature were proportionally affected by the mole ratio of TEOS in metal alkoxides solution. The addition of $TiO_2$ had an influence on the increasing of the gelation time, but the crystallization temperature was rarely dependent on the adding of nucleating agent. The crystallinity of LAS glass was improved by the nucleating agent under same heat treatment conditions.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.319-328
• /
• 1994

Aluminium and titanium precursors containing $\beta$-diketonate ligands were used for the synthesis of polymeric sols of alumina and titania by sol-gel methods. To prepare polymeric sols by solgel processing, we synthesized modified precursors having chelating organic ligands. With these precursors it was found to be possible to control both hydrolysis and polycondensation reaction rates which resulted in ultrafine particles few nms of average size. The optimum molar ratio of acid to alkoxide for alumina sol was 0.3-0.4 and that of water to alkoxide &as 1. On the other hand, the corresponding ratios for titania sol were found be 0.25-0.20 and 1 respectively. Dynamic light scattering measurements indicated that the average particle size in both sols was in the order of few nms. SEM photographs were taken to observe crack-free and smooth surfaces of coated membranes after sintering at $450^{\circ}C$. Alumina coated membrane on a slide glass had about 4-4.5$\mu \textrm{m}$, thickness and titania coated one had 2-2.5$\mu \textrm{m}$, thickness. And according to TEM photographs, the grain size of titania was smaller than 30nm and that of alumina was in the range of few $\AA$s to 2nms. An X-ray diffraction study revealed that alumina was $\gamma$ phase and titania was anatase crystal.

• 한국전기화학회:학술대회논문집
• /
• 1998.10a
• /
• pp.35-35
• /
• 1998

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.53-53
• /
• 2004