• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.266-272
• /
• 1992

Azacrownoalkyl phenylphosphinic acids were synthesized and their competitive solvent extraction characteristics from water to chloroform layer were investigated. Phosphinic acids were synthesized in good yields by one step reaction of phenylphosphinate, aldehyde, and monoazacrown ether and then basic hydrolysis of the resulting phosphinate dsters. These complexing agents revealed a wide effective pH range in extraction of alkali metal ions from water to the organic phase and total metal ion loading at pH 11 was about 75%. The selectivity of the cation extraction was determined mainly by the cavity size of the azacrown ethers, showing $Na^+$ >> $K^+$ > $Rb^+$ > $Li^+$ > $Cs^+$ for the alkyl phenylphosphinic acid ${\underline{2}}$, containing monoaza-15-crown-5 and $K^+$ >> $Rb^+$ > $Na^+$ > $Cs^+$ > $Li^+$ for the alkyl phenylphosphinic acid, ${\underline{3}}$, containing monoaza-18-crown-6 moiety. Applicable pH range of these azacrown ether phosphinic acids in solvent extraction of alkali metal cations was wider than a crownether carboxylic acid with similar selectivity, showing considerable amount of metal ion loading in slightly acidic or neutral media.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.427-434
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid at different NCO/OH molar ratios. Subsequently, the PUD was mixed with different types of alkali metal salts ($LiClO_4$, $NaClO_4$, and $KClO_4$) to prepare antistatic waterborne polyurethane coating solutions. Effects of the types and amounts of alkali metal salts were investigated on the surface resistances of the resulting coating films. The surface resistances of coating films were decreased with increasing the amounts of alkali metal salts added in the PUD. The coating films prepared with the same amount of alkali metal salts showed increased ionic conductivity with the order of $LiClO_4$ > $NaClO_4$ > $KClO_4$. Also, the surface resistances of coating films were increased with increasing the molar ratios of NCO/OH in the PUD.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.423-429
• /
• 2008

Currently, Ash-free clean coal producing process by solvent extraction is under development. The produced ash-free clean coal can be directly combusted in a gas turbine which results in substantial improvement of power generation efficiency. However, the clean coal produced by the solvent extraction still contain trace amount of alkali metal which may cause corrosion on turbine blades during the direct combustion. In present work ${\alpha},{\beta}$-metal (Zr and Ti) phosphates and H-Y zeolite were synthesized and their ion exchange characterizations were investigated for the application on alkali metal removal for clean coal production. $Na^+$ ion removal capacities of the metal phosphates and H-Y zeolite were measured and compared in both aqueous solution (100 ppmw, $Na^+$) and coal dissolved N-methyl-2-pyrrolidone (NMP, 12 ppmw $Na^+$) at elevated temperature. In aqueous solution, the ${\beta}$ form metal phosphates showed very high ion exchange capacities compared to ${\alpha}$ form. ${\beta}$ form metal phosphates also showed higher $Na^+$ removal capacities than H-Y zeolite. In ion exchange medium of NMP, all the ${\alpha}$ form metal phosphates showed over 90% of $Na^+$ ion removal efficiency in the temperature range of 200 to 400 while that of H-Y zeolite decreased as a half when the temperature was over 350. In addition, the regenerated metal phosphates by acid treatment showed no sign of degradation in $Na^+$ removal efficiency. Among the metal phosphates used, $Zr_{0.75}Ti_{0.25}(HPO_4)_2$ showed the best performance in $Na^+$ removal and is expected to be the most suitable inorganic ion exchanger for the alkali metal removal process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.48.1-48.1
• /
• 2010

Mono-crystalline silicon solar cell is fabricated by using alkali metals. These alkali metal, used in wet etching process, must be removed for the high efficiency solar cell. As wet etching process has been adapted due to its low cost. But lots of alkali metals like potassium remains on the silicon surface and acts as impurities. To remove these alkali metals many of cleaning process have to be applied when solar cell manufacturing process. In terms of alkali metal removal, modified etchant solution is required for concise cleaning process. In this paper ethylenediamine was used and proposed for the substituion of postassium hydroxide.

• Journal of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.127-132
• /
• 1983

The catalytic activity of ZSM-5 catalyst for the disproportionation of toluene is dependent on the type of cation exchanged, the degree of ion-exchange and the reaction temperature. The activity increases in the order of alkaline-, alkali earth-, hydrogen, and rare-earth-exchanged ZSM-5 and decreases with increasing degree of cation exchange. Among the ion-exchanged ZSM-5 catalyst, only Cs-ZSM-5 shows predominant selectivity for p-xylene. The selectivity increases with increasing degree of $Cs^+$-exchange and decreasing reaction temperature. This phenomenon is interpreted in terms of shape selectivity arising from the partial blocking of channel intersections by large cesium ions.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.224-229
• /
• 1999

Recently, many studies for the supported liquid membrane (SLM) using a carrier have been actively reported. Polymeric cation exchange membrane was synthsized by dissolving monensin carrier of antibiotic material in organic solvent. Then the SLM was applied to the Nernst-Planck and Fick equations and membrane potential and membrane permeability were measured respectively. The results showed the high selectivity towards alkali metal ions and the SLM showed linear relationship with low concentration. However, linear relationship did not appear at high concentration. This is explained by means of the new theory of the stagnant layer and the slop of logarithm value was linear for the up-hill transport phenomena of membrane transport.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.39-39
• /
• 2003

텅스텐브론즈 세라믹스의 결정구조는 산소 팔면체를 뼈대로 각각 다른 형태의 A, C, B 양이온 자리로 이루어져 있다. A, C의 양이온 자리는 알카리 이온 또는 알카리 토금속 이온으로 채워지며, B 자리는 Nb 또는 Ta 이온으로 채워지게 된다. 이 중 A와 C 자리가 채워지는 정도로 unfilled, filled, completely filled 텅스텐브론즈로 나누어지게 된다. completely filled 텅스텐브론즈의 대표적인 물질인 $K_3Li_2Nb_5O_{15}$(KLN)는 전광특성, 비선형 광학특성으로 인하여 다양한 광소자로의 응용과 압전 특성, 초전 특성을 이용한 압전 소자로의 응용이 가능한 재료로 보고되고 있다. 하지만 이러한 꽉 찬 결정구조로 인하여 KLN의 경우 한정된 고용영역을 가지고 있어 물리적 성질의 변화가 제한되어 있는데, 이를 극복하기 위한 여러 가지 시도가 있었다. 이 중 A 자리와 C 자리를 치환하는 연구는 많이 알려져 있으나 치환시 빈 자리를 수반하는 경우가 대부분이다. 반면, B 자리를 치환하는 연구는 Nb를 Ta로 치환하는 경우가 알려져 있는데 이 경우 결정내에 빈자리가 생성되지 않는다. 이들 연구는 모두 단결정의 경우에 국한되어 있으며 단결정 제조시에는 조성을 정확히 조정하기 어렵고, 냉각시 crack이 발생하는 등의 문제를 가지고 있어 그 응용이 제한되고 있다. 따라서 본 연구에서는 KLN 다결정 세라믹스에서 Nb를 Ta으로 치환하여 치환에 따른 상변화와 치밀화 거동, 그리고 이에 따른 전기적 특성을 조사하여 이들 간의 상관관계를 조사하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1691-1693
• /
• 2004

전해질 용액 중에서 내부 이온화산에 의한 드리프트 특성이 거의 없는 장기안정성과 pH 농도 감지 특성이 우수하지만 알칼리 금속 양이온 감지특성이 열악한 silicon nitride 박막의 이온 감지특성을 변화시키기위하여, 저온화학기상증착법(LPCVD)으로 제작된 silicon nitride 박막에 B 및 Cs를 이중이온주입시켰다. 이온수입이 되지 않은 silicon nitride 박막과 B 및 Cs가 이중이온주입된 박막의 전해질 용액 중 pH, pNa, pK, pRb 및 pCs 농도 감지특성을 조사하여 비교하였다. 이중이온주입된 샘플은 이온주입이 되지 않은 샘플에 비해 그 전해질 용액 중 pH 농도 감지도가 현저히 감소한 반면, 전해질 용액 중 알카리 금속이온농도 감지도는 이온주입되지 않은 샘풀에 비해 현저히 증가하는 특성을 보였다.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.16-20
• /
• 2004

To electropolymerize Polypyrrole(ppy) film modified with fullerene $ions(full^-)$ the cell, Au/5 mM pyrrole, 1mM fullerene, 0.1M $TBABF_4,\;CH_2Cl_2/Pt$, was employed to Prepare the wafer-like type of $electrode/ppy(full^-)ppy(full^-){\ldots}$ electrodes. They were applied to deposit alkali metal ions with the cell of Au(quartz crystal analyzer; QCA)/ppy$(full^-)$, 0.01M metal ion(aq.)/Pt. The depositing rate constant of each ion for $Li^+,\;Na^+,\;K^+,\;Rb^+\;and\;Cs^+$, determined from the first order equation was $1.60\times10^{-8},\;3.13\times10^{-11},\;1.38\times10^{-9},\;2.71\times10^{-11}\;and\;2.98\times10^{-12}mo1.s^{-1}$ respectively. The calculated stoichiometry of the ions determined by quartz crystal microbalance(QCM) at the electrodes was $Li_7C_{60},\;Na_4C_{60},\;K_3C_{60},\;Rb_1C_{60}\;and\;Cs_1C_{60}$ respectively.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.7-13
• /
• 2006

infrared(IR) absorption spectra were calculated for the ethyl ester of p-tert-butylcalix[4]arene (1) in the cone conformer and its alkali-metal-ion complex. The vibrational spectra were obtained by restricted Hartree-Fock (RHF) calculations with the 6-31G basis set. The characteristic vibrational frequencies of various C-O and C=O stretching motions of the complexes show that the structure of 1+K+ complex is almost of C4v symmetry compared to 1+Na+ (C2v) analogue. The theoretical results for the host molecule 1 and complex (1+Na+) were compared with the experimental results, and the calculated vibrational frequencies agree well with the features of the experimental spectra.