• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.343-352
• /
• 2012

In order to precisely determine the vertical displacements of CORS antenna phase centers caused by their replacement, intensive research has been carried out in this paper throughout processing GPS measurements made before and after the events. After applying the estimated displacement in the data processing, results show that coordinate repeatability of the vertical component is able to be 7.9mm on average. Comparing with results (e.g., 23.5mm) without applying the displacement, it was possible to conclude that these accuracies are significantly improved, which is equivalent to those before the event of the replacement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.231-244
• /
• 2015

The accuracy of reference point of VLBI antenna is mandatory to perform collocation of different space geodetic techniques. In this study, we evaluated the optimal methods for the 3D circle fitting to enhance the accuracy of the reference point of VLBI antenna. Two kinds of methodologies for the orthonormal coordinate system with translation of planar observation point and the unitary coordinate transforamation were suggested and their fitting accuracies were evaluated where the orthogonal distance was calculated by residual between observation point and fitting model and the recursive calculation was performed to improve the accuracy of 3D circle fitting. Finally, we found that the methodology for the unitary coordinate transformation is highly appropriate to determine the optimal equation for azimuth-axis and elevation-axis of VLBI antenna. Therefore, the reference point of VLBI antenna with high accuracy can be determined by the intersection of the above two axises (azimuth-axis and elevation-axis). This result is expected to be utilized for a variety of researches for connection between VLBI observation results and the national control point.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.268-272
• /
• 2002

슬롯이 있는 직사각형 마이크로스트립 안테나의 이중주파수 동작 특성을 연구하였다. 마이크로스트립 안테나의 급전방식은 전자기적으로 결합된 단일 마이크로스트립 안테나이며, 패치구조는 직사각형 패치의 대각선 방향에 "ㄱ"형 슬롯을 대칭으로 배치시켰다. 본 논문에서 제안된 "ㄱ"형 슬롯의 장점으로는 패치의 크기를 줄이는 효과와 동시에 이중 대역의 주파수를 갖는 것으로 확인되었다. 제안된 마이크로스트립 안테나의 반사손실은 S11에서 -10 dB 기준으로 첫 번째 공진점 4.808 ㎓ 에서는 120 MHz의 대역폭을 가졌고, 두 번째 공진점 6.175 GHz 에서는 100 MHz의 대역폭을 가졌다.는 100 MHz의 대역폭을 가졌다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.11-21
• /
• 2020

This paper deals with the impact of a GNSS (Global Navigation Satellite System) antenna radome on the PCV (Phase Center Variations) and the estimated kinematic coordinates. For the Trimble and Leica antennas, specially set up CORS (Continuously Operation Reference Stations) in Korea, the PCC (Phase Center Corrections) were calculated and compared for NONE, SCIS, SCIT, and TZGD radome from the PCV model published by the IGS (International GNSS Services). The results revealed that the PCC differences compared to the NONE were limited to about 1mm in the horizontal component while those of the vertical direction ranged from a few millimeters to a maximum of 7mm. Among the radomes of which PCV were compared, the SCIT had the most significant influence on the vertical component, and its GPS (Global Positioning System) L2 and L2 PCC (Phase Center Corrections) had opposite direction. As a result of comparing the kinematic coordinates estimated by the baseline processing of 7 CORSs with an application of the PCV models of the various radomes, the SCIS which was actually installed at CORS in Korea showed 3.4mm bias, the most substantial impact on the ellipsoidal height estimation whereas the SCIT model resulted in relatively small biases.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.59-66
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of antenna. Novel internal antenna with its controllable resonant frequency is presented for triple-band or over mobile handsets. The operating range can include GSM(880~960 MHz), GPS($1,575{\pm}10MHz$), DCS(1,710~1,880MHz), US-PCS(1,850~1,990 MHz), and W-CDMA(1,920~2,170 MHz). The proposed antenna is realized by combination of a half wavelength loaded line antenna and PIFA(Planner Inverted F Antenna). A single shorting and feeding points are used and they are common to both antenna structures. One of two inductors which is placed at each shorting post, one inductor is for adjusts amount of coupling, and the other controlling the resonant frequency in DCS/US-PCS/WCDMA bands. The inductance range for control of input impedance is between 0nH and 6.8nH, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.15dBi, 0.73dBi and 0.29dBi. The inductance range for control of the resonant frequency is between 1640MHz and 2500MHz, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.46dBi, 0.53dBi and 0.8dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.912-920
• /
• 2003

This paper is about the design of a small wide-band slot loop antenna, which consists of dual offset-fed and rectangular loop within the slot on a substrate. The proposed antenna is a novel structure generating a multi-resonances due to three geometrical resonance structures. The impedance matching of this antenna can be accomplished by changing the offset position of dual-fed at resonance frequencies. In this experiment, the slot of a fabricated antenna has a center frequency of 6.755㎓, 12.5mm${\times}$50mm in size and the rectangular loop has 10.5mm${\times}$27.5mm in size. The measured result is fractional bandwidth 63.21% with VSWR 2:1, which is agreed with the simulated result within 5% of error, and the maximum antenna gain is 7.42㏈i.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.319-326
• /
• 2006

To get the highly-accurate and precise position of a GPS receiver, they should consider the state-of-the-art GPS force and measurement models. Especially, the phase center variations (PCV) of a GPS antenna can cause several centimeters of positioning errors in the vertical direction. In this study, we implemented four different models of PCV and evaluated their impact on the computed coordinates. The test data were taken from the 14 National Geography Information Institute permanent GPS stations and 30 Minisry of Government Administration and Home Affairs sites. For different combinations of calibration methods, an average of 1.3-2.6cm of height difference was observed. Also, we found a maximum error of ${\sim}4mm$ in the estimates of the precipitable water vapors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.3
• /
• pp.162-167
• /
• 2013

The variation of S11 depending on the ground sizes of circular planar monopole UWB antenna was studied. And optimal ground structure and size in UWB application devices are proposed. Radius R of circular monopole UWB antenna as a reference antenna was designed for UWB frequency band, and the measured results of this antenna on the horizontal ground plane was good agreed with the simulated results. When radius R is small, optimal size of ground plane is proposed, and when radius R is more large, minimum size of ground plane is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1529-1536
• /
• 2010

In this paper, we propose a Axially displaced ellipse gregorian antenna with conical feed horn operating in Ku-band. For fast searching satellite position, it is designed the sub-reflector rotates about $1.5^{\circ}$ tilted by the central axis. the curvature and feed center of the main-reflector and sub-reflector are optimized to achieve maximum antenna efficiency. The designed reflector antenna shows the gain of 33dB and the cross polarization level of less than -21dB and the side-lobe level of less than －14 dB at 12.2 GHz. and C/N ratio of 19dB is proved by reception experiment of Koreasat with fabricated antenna.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.51.3-51.3
• /
• 2015

1995년 한국 최초로 VLBI관측이 이루어졌다. 일본 측의 26m 안테나(일본 국토연구원 소재)와 한국 측의 3.6m 안테나(국토지리정보원 소재)로 수행되었으며, 이 때 결정된 관측점의 좌표가 세계 공통으로 사용되는 "세계측지계(ITRF)"에 의거한 새로운 국가기준좌표계의 경위도 원점이다. 그 후 측지VLBI관측국의 설치를 위해, "측지VLBI구축 타당성조사 및 기본계획 수립을 위한 연구(2003년)"와 "측지VLBI구축 실시설계(2006년)"를 수행하였다. 그 결과 국가 차원에서 측지VLBI관측소(22m 안테나)를 건설하기 위해 2008년에 관측소 후보지를 세종시로 확정해서 공사에 들어갔다. 2012년에 준공되었으며, 명칭을 "우주측지관측센터"로 하였다. 그 후 1년 동안의 시험관측의 성공으로 아시아에서 3번째로 정식으로 IVS(International VLBI Service)에 가입하였다. 현재 독일, 일본, 미국 등의 측지VLBI관측국들과 정기적으로 관측을 수행하게 되었으며, 실적을 올리고 있다. IVS사업 뿐 만 아니라, 한국천문연구원의 KVN(천문 VLBI)연구팀과도 공동연구를 수행해서 우리나라의 천문 VLBI 및 측지VLBI관측사업의 활성화에 기여하고 있다. 장차 동남아 각국에 마이크로SAR위성의 관측데이터를 수신하기 위한 지상국(3m급 소형안테나)이 설치되면, 이를 활용해서 측지VLBI관측을 수행할 계획을 수립하고 있다. 이것은 위성용 수신기를 VLBI용 수신기로 교체하면 된다. 한국과 일본이 VLBI관측을 수행했던 것처럼 세종시에 설치된 우주측지관측소가 허브역할을 하면 된다. 즉 동남아 지역에 우주 VLBI관측망을 구축하게 된다.