• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.55-55
• /
• 2020

개수로 흐름에서 유체특성을 파악하는 것은 매우 중요하다. 특히 홍수가 발생하거나 유속의 증가에 따라 유체의 거동은 복잡하고 예측하기 어려워진다. 이러한 복잡한 유체거동은 하천시설물 설계, 시공 및 관리에 있어서 구성재료의 보호능력에 따라 예상하지 못한 조건에서 쉽게 파손될 수 있다. 국내 하천의 경우 한계유속과 한계소류력에 의해 하천설계에 적용되고 있다. 한계 유속의 경우 간단한 수식에 의해 산정될 수 있지만 실제 하천의 보호능력을 대표하기는 힘들기 때문에 한계소류력이 동시에 고려되어야 한다. 한계소류력은 개수로 흐름에서 복잡하게 발생하는 이차류나, 난류 특성에 의해 산정하거나 예측하기는 매우 어렵다. 한계 소류력 뿐만 아니라 하천을 구성하는 재질의 조도계수 역시 균일하지 못하고 매우 예측하기 어렵다. 따라서 본 연구에서는 이러한 복잡한 양상을 나타내는 수리학적 요소에 대해 표준화된 실험수로에서 실험을 통해 평가하고, 체계화된 설계지침이 되고자 연구를 진행하였다. 본 연구에서는 자연하천과 유사한 조건의 경사를 가지는 경사수로와 경사의 영향에서 자유롭게 평가를 진행하고자 무경사수로에서 실험연구를 통해 제방 재료의 안정성 평가방법을 제시하고, 재체의 안정성 평가를 위한 실험진행은 기 개발된 바닥응력을 직접측정하는 장치와 PIV시스템을 이용하여 수리특성을 측정하였다.(Park J.H. et al. 2016, Flow Measurment and instrumentation.) 하천의 설계나 평가에 적용되는 평균 소류력 개념은 복잡한 난류흐름에서 평가지표로써 대표하기 힘들기 때문에 바닥에서 발생하는 소류력을 직접 측정하고, 측정된 소류력을 검증하고자 난류유속 u', v'을 이용하여 Reynolds stress산정하여 Total shear stress를 추정하는 기법을 사용하여 검증하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.449-459
• /
• 2011

By examining the experimental results, the critical mean velocity which initiates the movement of riprap is increased with the riprap size in mean diameter, the mean diameter over water depth (d/h), Froude number (Fr), and turbulent shear velocity over critical mean velocity (u*/${\nu}$) which have great correlations among them so these parameters are adopted governing hydraulic stability for riprap. The hydraulic stability equation for riprap is developed by regression analysis. The developed equation is expanded from 0.36~0.73 m/s of experimental range to 0~5.0 m/s for the application in engineering discipline. So many useful relations among those parameters including critical mean velocity are derived by expanding to high Reynolds regions. Mean diameter calculation results by expanding to high Reynolds regions coincide with the calculations of ASCE and USBR at the range of 0~3.0 m/s and the calculation result of ASCE at the range of 3.0~5.0 m/s. The results by developed formulae coincide well with the formulae of ASCE in general and also the results by recently developed existing formulae of hydraulic stability for riprap. Thus, the developed equation has the high applicability in engineering discipline to evaluate the hydraulic stability for riprap.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.76-79
• /
• 2006

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.243-251
• /
• 2008

Recently, the mining methods are changing from surface mining to underground mining because of the increment of the environmental issues and legal regulations. Therefore, the stability of underground openings is a major concern for the safety and productivity of mining operations. In this paper, a survey of structural geology and discontinuities were carried out at a limestone mine. The relevant mechanical properties of rocks were determined by the laboratory tests and rock mass classifications (RMR and Q-system) for the mine design and input data for the stability analysis. The dimensions of unsupported span for underground openings and pillar were decided based on the RMR values of rock mass classifications. The stability analysis for the suggested mine design was examined through the empirical methods (stability graph method and critical span curve) and 3-D numerical analysis (Visual-FEA).

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.121-129
• /
• 2004

In this study, a slope stability chart for assessing stability of homogeneous simple soil slopes is proposed. Most existing slope stability charts are based on limit equilibrium method, which is not rigorous in mechanical standpoint. Meanwhile, limit analysis based on the principle of virtual work and the bound theorems of plasticity is suitable for evaluating the stability of geotechnical structures such as slope due to its simplicity in computation and mechanical rigor. Numerical limit analysis taking advantage of finite elements and linear programming can consider various slope conditions and, in addition, find the optimum stability solution with effeciency. In this study, a numerical limit analysis program in terms of effective stress is developed and a mechanically rigorous slope stability chart is proposed by performing stability analyses for various slope conditions. Pore pressure ratio, commonly used in stability charts, is applied to consider the effects of pore pressure for effective stress analysis. As a result of comparison between proposed stability chart and Spencer's stability chart, it was found that Spencer's chart solutions are biased to lower bound which means conservative in design.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.6
• /
• pp.501-517
• /
• 2011

In general, the tunnel stability during excavation is assessed by comparing measured displacements at roof and sidewall to control criteria. The control criteria were established based on the past experience that considered ground conditions, size of the tunnel cross section, construction method, supports, etc. Therefore, a number of researches on the control criteria using the critical strain have been conducted. However, the critical strain obtained from uniaxial compression tests have drawbacks of not taking damage in rock mass due to increase of stress level and longitudinal arching into account. In this paper, damage-controlled tests simulating stress level and longitudinal arching during tunnel excavation were carried out in addition to uniaxial compression tests to investigate the critical strain characteristics of granite and gneiss that are most abundant rock types in Korean peninsula. Then, the critical strains obtained from damage-controlled tests were compared to those from uniaxial compression tests; the former showed less values than the latter. These results show that the critical strain obtained from uniaxial compression tests has to be reduced a little bit to take stress history during tunnel excavation into account. Moreover, the damage critical strain was proposed to be used for assessment of the brittle failure that usually occurs in deep tunnels.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.39-50
• /
• 2001

In this study, in order to investigate the effects of reinforcement length and vertical spacing on the factor of safety, the road embankment reinforced by geogrid was analyzed using RSS(Reinforced Slope Stability) program based on limit equilibrium analysis. The result by computer analysis showed that the factor of safety for reinforced slope increased with increasing length of reinforcement and with decreasing vertical spacing of reinforcement up to certain limit. Also, numerical analysis by FLAC was performed on reinforced slope to evaluate the horizontal displacement, horizontal stress, and distribution of tensile forces of reinforcements in the cases of several reinforcement length. The results of analysis showed that the critical failure mode was toe failure or slope failure and the effect by the additional reinforcement length on the slope stability was negligible under stabilized condition.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.11
• /
• pp.11-22
• /
• 2019

Limit state design (LSD) and allowable stress design (ASD) are two main types of soil nailing design methodologies. In the LSD method, stability is determined by applying individual coefficients to ground strength, working load and etc. The ASD method calculates the safety factor and compares it with the minimum safety factor to determine the stability. The global design trend of soil nailing system is changing from the ASD method to the LSD method. The design method in Korea still adopts the ASD philosophy while others mostly do the limit state design. In this study, four soil nail design methods, 'FHWA GEC 7' in U.S. (2015), 'Clouterre' in France (1991), 'Soil nailing - best practice guidance' in U.K. (2005), 'Geoguide 7' in Hongkong (2008), and 'Design guide for slope in construction work' in Korea (2016) were applied to the evaluation of the stability and the results were analyzed comparatively in brief. It is revealed that the design method of 'the overall stability of soil nail walls' in Korea is the most conservative and next those by FHWA, Clouterre and CIRIA become more conservative in order. However, the difference of results obtained from FHWA and Clouterre is negligible. Also, this study found out that efforts to improve domestic design criterion are needed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.221-221
• /
• 2020

최근 기후 변화에 따라 국내 하천은 급격한 유량 증가로 인해 하상의 변화에 많은 영향을 미치고 있다. 특히, 홍수시 하상의 변화에 영향을 미치는 유량 및 유속, 하상재료의 종류 및 대표입경, 입자의 특성 등이 있으며, 이런 요인들은 하상재료의 유실에 영향력을 미치고 있다. 또한, 하상재료의 유실에 영향을 미치는 하상재료의 단위중량, 대표입경, 재료의 특성과 관련이 있으나, 현재 까지 다양한 연구가 진행되고 있지만, 하상재료의 한계조건에 영향을 미치는 관련된 연구는 국내에서 미비한 실정이다. 본 연구에서는 하상의 재료의 종류, 입자의 특성, 입자의 크기에 따라 재료가 가지는 한계 유속과 한계 소류력의 영향력을 파악하고자 진행하였다. 본 연구에서 사용된 실험 수로는 인제대학교에서 개발한 무경사형 고속수로(Jung. 2019)는 수조 제원 가로 1.5 m, 세로 0.95 m, 높이 2.4 m, 수로는 개수로의 형태로 총 길이 10 m, 폭과 높이는 각각 0.3 m인 무경사 고속수로에서 진행되었으며, 사용된 재료는 일반 하천에서 사용되고 있는 모래, 황토를 이용하여 적정 비율을 섞어 시료를 제작하였다. 제작된 시료는 하천설계기준에 제시되어 있는 재료에 대한 등급을 비교했을시, 2-3등급 사이의 재료로 판단되며, 모래와 황토의 비율이 50:50 일때 입도 분포가 가장 좋은 재료로 나타났으며, 제작된 시료를 수로에 삽입하여 유하 전후를 수위센서를 통해 세굴율을 측정하였다. 세굴 측정시 모래 100%로 제작된 시료가 가장 많은 세굴이 일어났으며, 모래 25%, 황토 75%로 이루어진 시료가 가장 적은 세굴이 일어났다. 바이오폴리머의 강도 증진을 보기 위해 세굴이 가장 심하거나, 세굴이 적은 재료에 바이오 폴리머를 섞어 추가 실험을 진행 하였다. 본 연구를 통해 친환경적인 하상재료의 한계유속, 한계소류력에 대한 안정성평가를 진행하여 재료의 안전성에 대해 평가하고 기초자료로 기여하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.987-995
• /
• 2013

The purpose of this study is to examine the hydraulic stability of non-toxic revetment technique for eco-friendly design of the domestic river restoration. Recently, instead of the flood control function-oriented river management policy for the engineering efficiency, the improvement of the environmental performance for the ecological river restoration project is implemented. However, the inappropriate hydraulic design criteria of the new revetment technique happen to the economic losses at flood season frequently. The hydraulic stability of the riprap and the block include the banks of rivers, riverbed protection, scour protection and so on. In this study, the high speed experimental channel was developed, which has the maximum velocity of 3.5 m/s, to perform the hydraulic experiments of the block method with non-toxic glue with various conditions to find the critical velocity of the revetment block for the hydraulic stability.