• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.69-77
• /
• 2005

To optimize and limit the axial length of the baffle of the KSR-III engine, stability rating tests using pulse gun as one of artificial disturbance devices have been done. Generally a rocket engine can be considered to be dynamically stable if a certain imposed external perturbation or pressure oscillation in rocket combustion chamber could be suppressed within a short time period. Decay time and other parameters for the evaluation of stabilization ability of an engine to external perturbation have been analyzed to quantify stabilization capacity of engine, in other words, dynamic stability margin. Baffle not covering flame zone enough which can be considered as collision region of injector wasn't be able to suppress external perturbation sufficiently. The limit of combustion stability margin of engine is assumed to be 50 mm length baffle of the KSR-III engine.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.645-651
• /
• 1997

Tetragonal zirconia polycrystals (TZPs) doped with $Y_{2}O_{3}$ and $Nb_{2}O_{5}$ were prepared by the conventional sintering to enhance fracture toughness and phase stability of TZPs without controlling the grain size. TZP composites were obtained by adding the transformable TZP to the non-transformable TZP in wt%. The monolithic tetragonal $ZrO_2$, same as the composite composition containing 15 wt% transformable TZP, sintered at $1550^{\circ}C$ for 10h in air, exhibited the fracture toughness of 9$MPam^{1/2}$ and no low-and high-temperature degradation at temperatures in the range of 220 to $1000^{\circ}C$ for 100h in air. The corresponding single composition was 90.24 mol% $ZrO_2$-5.31 mol% $Y_{2}O_{3}$-4.75 mol% $Nb_{2}O_{5}$. The microstructure observation revealed that the t-$ZrO_2$ grains grew grandually with sintering time and no microcraking and twinning were observed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.22-48
• /
• 1995

This study was investigated to search for the effects of the structure of each component in four-component O/W microemulsion system on its formation region, droplet size and stablilty. The results was that the more number of OH site, the shorter carbon chain length of polyol, the larger formation region of microemulsion was showed. The small microemulsion droplet was obtained on condition that the polatry of oil was large and carbon chain length of hydrophobic group of surfactant was long. In using satrated hydrocarbon (such as liquid paraffin, squalane) as dispersed phase, the stability of microemulsion was better than aromatic oil phase.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.98-107
• /
• 2020

In surface mining, it is very important to create a mining area for economical mining. This study examined the contribution of design factors on slope stability with different slope design and blasting conditions. The design factors were the properties of the rock, the slope angle and the bench height, and the blasting conditions were reflected at different explosive weight and distances. The safety factor of slope was calculated by shear strength reduction method through 3D modeling, and the contribution rate of rock slope was 94.8%, which is relatively higher than other design factors, slope angle 0.89%, bench height 0.58%, and blasting It is shown that it affects about 3.73%, and it can be seen that blasting at a close distance can affect the stability of the slope.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.801-810
• /
• 2022

This study investigates the evolution processes of alternate bars in the channel with bank stability by vegetation by laboratory experiment. Laboratory experiments are conducted to elucidate the behavior of alternate bars by the influence of riparian vegetation on the rivers with erodible banks. To control bank stability of the channel, the actual vegetation, alfalfa, is grown by adjusting the density of alfalfa on the flood plain. As the vegetation density increases in the flood plain, the bank erosion rates and the channel widening rates decrease and the bank stability increases. The alternate bars migrate slow downstream over time. Moreover, the bars in a channel with strong banks migrate rapidly, which is related with the aspect ratio, that is, width to depth ratio. The bar wavelength decrease with vegetation density. Our laboratory experiments show that the behavior of bars differ according to bank strength.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.119-124
• /
• 2009

Stents are frequently used throughout the human body. They keep pathways open in vascular or nonvascular duct for a long time. Therefore its stability is very important factor. In recent years, aconsiderable amount of research has been carried out in order to estimate mechanical properties of the stent such as expansion pressure behavior, radial recoil and longitudinal recoil using FEM (Finite element analyses). However, published works on simulation of stent fatigue behavior using FEM are relatively rare. In this paper, a nonlinear finite-element methodwas employed to analyses the compression of a stent using external pressure and fatigue behavior. Finite element analyses for the stent system were performed using NASTRAN FX. In conclusion this paper shows how the stent is behaved in the body, and its fatigue behavior.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.27-28
• /
• 1997

최근 들어 분리공정의 발달과 산업의 고도화에 따라 기체 및 액체분리의 중요성이 강조되면서 열적, 화학적 그리고 기계적 안정성이 좋으며, 수명이 길고, 세척과 재생이 용이하며, 미생물에 의한 손상이 없는 무기막에 대한 연구가 진행중이다. 무기막은 기공의 크기에 따라 크게 다공성 막과 비다공성 막의 두 종류로 구분된다. 비다공성 금속막은 특정 기체에만 투과성을 가지며, 이때 기체는 용해-확산(solution-diffusion)기구에 의해 금속막을 투과하므로 특정기체에 대한 선택도는 매우 크나 투과도가 매우 작고 가격이 비싼 단점을 가지고 있다. 다공성 막은 기체 투과율이 큰 반면 기체 선택도가 작은 단점을 가지고 있다. 현재 기체분리에 사용되고 있는 무기막은 기공크기가 40${\AA}$ 이상으로 기체 분리가 Kundsen diffusion에 의해 이루어지므로, 기체 투과도는 큰 반면에 기체에 대한 선택도는 그리 크지 않다. 따라서 최근 들어서는 다공성 담체에 기공이 작은 ($d_{pore}<20{\AA}$)박막을 담지시켜 기체의 분리 선택도를 향상시키기 위한 연구가 활발히 이루어지고 있다. 본 연구에서는 유기금속 화학증착법(metal-organic chemical vapor deposition:MOCVD)을 이용하여 수소 선택성을 가지는 $SiO_2/Al_2O_3$ 복합막을 비율별로 제조하여 증착속도를 알아보고, 열과 수분에 노출시켜 박막의 기체투과도 변화를 살펴보았다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1758-1759
• /
• 2011

본 논문은 비선형 시스템의 소속함수 의존성을 이용한 관측기 기반 퍼지 제어기 설계 기법을 제시한다. Takage-Sugeno (T-S)퍼지 모델링을 이용해 비선형 시스템을 퍼지 모델로 표현한다. 시스템의 안정화 조건은 소속함수의 의존성을 이용한 리아푸노프 안정도 해석 방법을 이용해 유도된다. 안정화 조건은 선형 행렬 부등식으로 표현되며, 부등식의 해를 이용해 제어기의 이득값을 구한다. 모의실험을 통해 설계된 제어기의 타당성을 검증한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.115-117
• /
• 2002

메모리 기술의 발전은 주기억장치 데이터베이스가 널리 사용될 수 있는 토대를 마련하였다. 주기억장치 데이터베이스에서는 주기억장치의 휘발성으로 인해 시스템이 파손될 경우 모든 데이터들을 잃어버리게 되므로 데이터베이스를 일관된 상태로 복구시켜주는 회복기법이 매우 중요하다. 본 논문에서는 비휘발성 메모리이면서도 RAM과 같이 빠른 접근속도를 가지는 FRAM과 같은 고성능 비휘발성 메모리를 이용하여 그림자 갱신과 로그 기반 백업을 실시함으로써 시스템 파손 후, 마른 복구를 제공하면서도 기존의 로그 기반 백업이 가지는 문제점을 해결하는 회복기법을 제안한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.4
• /
• pp.349-354
• /
• 2015

This paper presents the stability conditions of the Takagi-Sugeno (T-S) fuzzy sampled-data filter. The error system between the T-S fuzzy system and fuzzy filter is presented. In the sense of the Lyapunov stability analysis, the stability conditions are given, which can be represented in terms of linear matrix inequalities (LMIs). The proposed stability conditions utilize the different approach from the conventional methods, and have better performance than that of the conventional ones. The simulation example is given to show the effectiveness of the proposed method.