• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.29-32
• /
• 1996

기존의 안과 진단 및 치료 기기의 안구 고정장치는 진단 및 치료에 있어서 피검사자와 검사자에 사이에 충분한 협조가 되지 않을 경우 진단의 비효율성과 치료의 안정성등의 문제가 발생하고있다. 따라서 이러한 문제를 보완하기 위하여 SLO의 전면 세극등을 소형의 반사경으로 대치하고 표시등을 후면의 먼거리에 수직으로 배열시켜서 피검사자에게 적당한 높이의 고정등을 선택하게하여 수직방향의 안구 위치를 고정시키고 SLO(Scanning Laser Ophthalmoscope)의 좌우 회전기능으로 표적의 수평방향을 근절시킨 후에 검사자의 조작으로 원격조정되는 서보장치를 이용하여 다시 반사경을 전방향으로 미세하게 회전되게하여 정확한 위치로 안구를 이동시키게 하는 원격조정 표적 추적장치를 개발하였다. 이에 따라 피검사자는 거울에 비친 먼거리의 허상을 보게 되어 세극등을 이용한 근접주사방식의 단점인 안구의 축동, 폭주등으로 인한 환자의 눈의 피로를 최소화하면서 피검사자의 안구를 검사자가 원하는 위치로 고정시킬 수 있게 함으로써 임상실험에서 안과 진단의 정확성과 관리도를 높이고 치료의 효율성과 안전성을 증가시킬 수 있는 원격조정 추적장치로써의 성능을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.568-571
• /
• 2022

2007년에 '메타버스 로드맵(Metaverse Roadmap)보고서가 발표된 이후, 메타버스 로드맵에 축이 되는 라이프 로깅, 증강현실, 거울세계, 가상세계의 의미와 활용내용에 대한 연구 역시 활발히 이루어지고 있으며, 이것이 갖는 산업적·경제적 영향에 대해 다양한 방송매체·미디어 등을 통해 접할 수 있다. 또한 메타버스를 활용한 사회적 기능으로는 ①경제(메타버스 활용 산업 생태계 육성), ② 교육(메타버스 기반 체감형 학습지원), ③문화관광(시공간 제약 없는 온택트 문화마케팅), ④소통(시민 중심의 맞춤형 열린 소통), ⑤도시(현실과 가상을 결합한 XR기반 도시혁신), ⑥행정(현실보다 편리한 신개념 가상 행정), ⑦인프라('메타버스 서울'의 안정적인 인프라 조성)를 통해 메타버스의 순기능을 극대화하기 위한 전략으로 활용되고 있음을 확인할 수 있다. 이에 본 논문은 메타버스에 대한 기술 및 활용에 관한 관심에 비교해 메타버스 윤리에 대한 논의가 부족한 상황이라는 점에 주목한다. 그래서 메타버스에 대한 사회적 기능에 대해서 살펴보고, 메타버스에서 발생할 수 있는 사회·윤리적 문제를 영화 '레디 플레이어 원(Ready Player One)'을 통해 살펴보았다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.394-403
• /
• 1994

Chaos characteristics of laser diodes with external optical feedback is investigated. For a FabryPerot resonator laser, optical feedback by external mirror is assumed. The simulation is performed in such a way that a current of $1.3J_{th}$ is injected into the $1.3{\mu}m$wavelength "InGaAsP" buried hetero structure laser. With the increment of K, the system shows the evolution of four steps as follows: i) When the optical feedback coefficient K is very small, the relaxation oscillation is damped and the system reaches the steady state showing the stable operation characteristics. ii) As K increases a little bit, the relaxation oscillation is not damped any more and the system begins to maintain the periodic oscillation. iii) When K is increased further, the oscillation shows the larger amplitude and the long periodic length. iv) When K is increased very large, the system gets unstable and enters into the coherejlce collapse state. state.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.727-732
• /
• 2020

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of δL > 0, the threshold gain and the beam distribution in the longitudinal direction and the radiated power ratio P_l/P_r of the oscillation mode were compared for the cases of the phase of 𝜌_l=π and π/2. If the phase of 𝜌_l=π, in order to obtain a low threshold current and high frequency stability, κL should be greater than 8. In the case of the phase of 𝜌_l= π/2, when κL is larger than 4.0, the oscillation gain starts to be lower than when the phase of 𝜌_l=π. In order to lower the threshold current of a oscillation mode and enhance the frequency stability, κL should be greater than 8.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.389-394
• /
• 2021

In this work, we study the properties of molecular structure and boundary orbital functions of the DPHMP-AlH and propiophenone and butyrophenone, which are forms of alkoxy-amine-aluminum derivatives. Furthermore, we investigate the effect on the selective reduction of the final products (R), (S)-phenylpropanol and (R), (S)-phenylbutanol by calculating the stereoscopic and thermodynamic parameters of the transition state. Considering the three-dimensional molecular structural stability, the transition status of (S) types DPHMP-AlH and alkylphenone was found to be more stable, resulting in the selective reductions of DPHM-AlH and alkylphenone from this result: (S)-(1)-phenylpropanol and (S)-(1)-phenylbutanol was confirmed that the formation was advantageous.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.483-488
• /
• 2022

In this paper, when a gain grating and a refractive index grating exist simultaneously in a DFB laser diode having a wavelength of 1.55 ㎛, an anti-reflection coating is applied to the right mirror surface so that ρ_r=0. In case of δL<0, the characteristics of the oscillation frequency and oscillation gain have been analyzed. Whenever the phase of the grating on the left side of the mirror continuously decreases by π/2, the δL value of each oscillation mode decreases by about 0.6 to the left of the graph lines of each oscillation mode. The case of the oscillation mode having the lowest threshold gain is the case of κL=10, and in this case, the mode selectivity is relatively low compared to the case of other values of κL. From κL=0.1 to κL=6, the mode selectivity and the frequency stability are excellent. As the mode selectivity is excellent, the frequency stability is excellent. Compared to the case with two cleaved mirrors, the DFB laser diode with anti-reflection coating increases the threshold gain of the oscillation mode by about 2 times, but the mode selectivity becomes about 2 times better.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.77-81
• /
• 1998

The eptiaxial growth of Ge on the clean and surfactant (Sn) adsorbed surface of Ge(111) was studied by the intensity oscillation of a RHEED specular spot. In the case of epitaxial growth without the adsorbed surfactant, the RHEED intensity oscillation was stable and periodic up to 24 ML at the substrate temperature of $200^{\circ}C$. Therefore the optimum temperature for the epitaxial growth of Ge on clean Ge(111) seems to be $200^{\circ}C$. However, in the case of epitaxial growth with the adsorbed surfactant, the irregular oscillations are observed in the early stage of the growth. The RHEED intensity osicillation was very stable and periodic up to 38 ML, and the d2$\times$2 structure was not charged with continued adsorption of Ge at the substrate temperature of 2002$\times$2. These results may be explained by the fact that the diffusion length of Ge atoms is increased by decreasing the activation energy of the Ge surface diffusion, resulted by segregation of Sn toward the growing surface.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1544-1551
• /
• 2007

A start-up circuit of the bandgap reference voltage generator of cascode current mirror type with wide operating voltage range and enhanced power-up characteristics is proposed in the paper. It is confirmed by simulation that the newly proposed start-up circuit does not affect the operation of the bandgap reference voltage generatory even though the supply voltage(VDDA) is higher and has more stable power-up characteristic than the conventional start-up circuit. Test chips are designed and fabricated with $0.18{\mu}m$ tripple well CMOS process and their test has been completed. The mean value of measured the reference voltage(Vref) is 738mV and The three sigma value($3{\sigma}$) is 29.88mV.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.347-355
• /
• 2002

We have constructed a high efficiency and broad tunable cw Ti:sapphire laser with a four-mirror symmetric Z-type laser cavity to increase the laser usability. From theoretical analyses and experimental data for a symmetric Z-type laser cavity containing a Kerr medium, the cavity mode size and the Kerr-lens mode-locking (KLM) strength for KLM lasers can be confirmed as function of the position in the cavity, the intracavity laser power, and the stability parameter. As a result, the slope efficiency and the maximum average output power of cw Ti:sapphire laser at 5 W pumping power of Ar-ion laser were 31.3% and 1420 ㎽ respectively. The tunablility was ranged from 730 ㎚ to 908 ㎚ with average output power above 700 ㎽. We obtained the KLM operation easily by self-aperturing effect in the Kerr medium and the slope efficiency and the maximum average output power of KLM Ti:sapphire laser was 16% and 550 ㎽ respectively. The spectral bandwidth was 33 ㎚ at the center wavelength of 807 ㎚ and the pulse width was 27 fs with a repetition rate of 82 ㎒.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.535-541
• /
• 2005

We report on the development of a passively mode-locked near-infrared femtosecond laser with Cr:YAG crystal that operates near room temperature. The laser wavelength could easily be tuned by using only the internal prism pair over 110 nm from 1400 nm to 1510 nm in cw and over about 30 nm in mode-locked operation, respectively Maximum cw output powers of 810 mW were obtained with $1.5 \%$ output coupler for absorbed pump powers of 7.6 W. For compensation of the internal group velocity dispersion, an IR graded prism pair was used. The Cr:YAG laser delivered nearly Fourier-transform limited pulses with a pulse duration as short as 64 fs at 100 MHz repetition rate. In the mode-locked regime, the laser was operating at 1510 nm with a spectral bandwidth of 44 nm. In order to avoid unstable mode-locking and power instabilities, self-built tubes were inserted into the beam path in the resonator and purged with N2 gas. Finally, output powers of the Cr:YAG laser were optimized to 250 mW fer long time stable mode-locked operation.