• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2009

The selection of the support system is an important design parameter in design and construction of the tunnel using the new Australian tunnel method. It is a common practice to select the support based on the rock mass grade, in which the rock mass is classified into five rock groups. The method is applicable if the characteristics of the rock mass are uniform in the direction of tunnel excavation. However, such case is seldom encountered in practice and not applicable when the properties vary along the longitudinal direction. This study performs comprehensive three dimensional finite difference analyses to investigate the ground deformation pattern for cases in which the rock mass properties change in the direction of the tunnel axis. The numerically calculated displacements at the tunnel crown show that the displacement is highly dependent on the stiffness contrast of the rock masses. The results strongly indicate the need to select the support type $0.5{\sim}1.0D$ before the rock mass boundary. The paper proposes a new guideline for selecting the support type based the results of the analyses.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.383-392
• /
• 2008

This study aims to evaluate the mechanical-chemical stability of used coal ash blocks, for improving fishing grounds. The surface of weathered ash blocks in seawater showed a decrease in the Ca and an increase in the Mg contents, compared to that of fresh blocks. This result reflects the substitution of Ca by Mg in seawater. The compressive strengths of ash blocks submerged into seawater during 12 months ranged from 235.23 to $447.43\;kgf/cm^2$; this is higher than the standard strength of wave-absorbing blocks($180\;kgf/cm^2)$ that are used for harbor construction. In addition, the compressive strength of ash blocks tends to increase with increasing installation time in seawater. The result of leaching experiments on coal ash blocks by Korean Standard Leaching Test(KSLT) method showed that leached concentrations of most metals except Cr(that leached up to 50 ppb, approaching standard concentration) do not exceed the seawater quality standards. A long-term(112 days) heavy metal leaching test to analyze seawater without mixing-dilution also showed that the concentrations of leached heavy metals, except for Cu, under anaerobic conditions do not exceed the seawater quality standards. Accordingly, the use of coal ash blocks in marine environments appears to be safe from chemical and mechanical factors that decrease the efficiency of concrete. Also, leaching concentration of Cu seems to be stable by decrease of leaching concentration due to dilution of seawater.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.124-124
• /
• 2016

하천에서의 분변성대장균은 분변성 오염 정도를 나타내는 지표로서, 이 농도가 높을수록 오염된 하천수와의 접촉을 통한 호흡기, 소화기 및 피부 관련 질병의 발발 확률이 높다고 알려져 있다. 따라서 하천에서의 수영, 수상스키 등과 같은 입수형 친수활동을 할 때, 분변성대장균 농도가 농도 기준 이하인지를 확인하고 이러한 정보를 친수활동에 이용할 필요가 있다. 그러나 분변성대장균의 경우, 현재 자동수질측정망에서 측정되고 있는 다른 수질인자들과는 달리 실시간 측정이 불가능하다고 알려져 있다. 분변성대장균을 측정하는데 있어 최소 18시간 이상이 필요하며, 이러한 분변성대장균 측정 방식은 하천 이용자들이 안전한 친수활동을 영위하는데 있어 적절한 수질 정보를 제공하지 못한다. 그러므로 분변성대장균을 예측하는 모델을 개발하고, 이를 이용하여 실시간 분변성대장균 정보를 생성하여 하천 이용자들에게 제공할 필요가 있다. 본 연구에서는 친수활동이 활발하게 이루어지는 곳 중 하나인 북한강의 대성리 지점에 대해 데이터 기반 모델을 이용하여 분변성대장균을 예측하였다. 데이터 기반 모델은 물리 기반 모델에서 필요한 지형데이터나 비점오염원 등의 초기 오염물의 양에 대한 데이터를 필요로 하지 않고, 대신 독립변수로 사용되는 기상 및 수질데이터를 필요로 한다. 이러한 기상 및 수질데이터는 기존 기상관측소, 수질관측소에서 매일 자동으로 측정되기 때문에 데이터 기반 모델은 물리 기반 모델에 비해 입력데이터를 구성하기가 쉽다는 장점을 지닌다. 이러한 데이터 기반 모델 중 분류 모델은 회귀 모델과 달리 분변성대장균 농도가 일정 수질기준 이상을 넘는지를 바로 예측할 수 있다. 본 연구에서는 분류 모델 중 높은 예측력을 가진다고 알려진 랜덤포레스트(random forest) 기법을 이용하여 분변성대장균 예측 모델을 개발하였다. 분변성대장균 예측 모델은 주어진 기상 및 수질 조건에 대해 분변성대장균이 200 CFU/100ml가 넘는지를 예측하였다. 예측된 분변성대장균이 기준을 넘는 경우를 2등급, 넘지 않는 경우를 1등급으로 명명하였다. 모델을 개발하기 위하여 북한강 대성리 인근 측정소에서 2010년부터 2015년까지 측정된 기상 및 수질데이터를 수집하였다. 수집한 데이터를 훈련 및 검증데이터로 샘플링하였으며, 이 때 샘플링한 데이터가 기존 데이터가 가지고 있던 등급별 비율을 유지하기 위하여 층화샘플링을 하였다. 본 연구에서는 샘플링에 의한 불확실성을 줄이기 위하여 랜덤하게 50번 샘플링된 각각의 훈련데이터에 대해 모델을 개발하였다. 50개의 모델의 검증 결과를 종합한 결과, 전체 예측률은 0.139로 나타났다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.194-205
• /
• 2018

This study investigated knowledge and attitudes of long-term care hospital nursing assistants such as nursing aides and direct care workers toward patient safety and their safety care activities. This was a descriptive study that attempted to enhance the competence of nursing assistants' patient safety management, and the data were used to develop a training program for nursing assistants. A total of 230 nursing assistants working at six hospitals whose wards were over 200 participated and were assessed with a rating 1 or 2 in 2013 in B city. Data were collected using questionnaires from March 2 to March 26 in 2017. The collected data were analyzed by the SPSS/WIN 20.0 program using number, percentage, mean, standard deviation, t-test, ANOVA, $Scheff{\acute{e}}$ test, correlation coefficient, and multiple regression. In conclusion, the findings show that patient safety care activities were better performed by nursing aides than direct care workers. Higher education and a higher number of patient safety training programs and patient safety care activities were frequent. In addition, nursing assistants' knowledge of patient safety affected attitudes toward patient safety, and attitudes affected patient safety care activities. Therefore, an actual regular training program for patient safety should be executed over five times a year to improve patient safety perception. Furthermore, a hospital system including adequate working time needs to be improved. Based on the results of the study, patient safety in long-term care hospitals should be improved, and this study could be utilized as basic data to develop a training course for improvement of knowledge and attitudes of nursing assistants toward patient safety.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.773-782
• /
• 2002

In this study, a series of fatigue tests are performed in order to estimate quantitatively the characteristics of fatigue crack growth rate according to the base metal, heat affected zone(HAZ) and weld metal, and the welding method and grade of strength of object steels, and the influence on fatigue crack growth rate according to the direction of welded line for high strength steels of SM570, POSTEN60, and POSTEN80 steels. From the fatigue test results, the retardations of fatigue crack growth rate are remarkable in case that the direction of notch is parallel to welded line than in case that the direction of notch is perpendicular to welded line because of compresive residual stress in weld metal & HAZ. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range. Meanwhile, fatigue safety is guaranteed sufficiently in the object steels because the fatigue crack growth rate in the range of fatigue crack propagation has a similar tendency to the test results & existing results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.185-195
• /
• 2017

In recent years, unexpected bridge fire accidents have increased because of augmenting the number of traffic volumes and hazardous materials by the increment in traffics and distribution business. Furthermore, in accordance with the effort of using the under space of bridges, the ratio of occupied by combustible materials like oil tanker or lorry has been increased. As a result, the occurrence of bridge fire has been growing drastically. In order to mitigate the accident of bridge fire, risk assessment of bridge fire has been studied, however, practical risk models considering safety from users' viewpoints were scarce. This study represented quantitative risk assessment model applicable to national road bridges in Korea. The primary factors with significant impacts on bridge fire accidents was chosen such as clearance height, materials of bridges, arrival time of fire truck and fire intensity. The selected factors were used for Fire Dynamics Simulation (FDS) and the peak temperature calculated by FDS in accordance with the fire duration and fire intensity. The risk assessment model in bridge fire reflected the FDS analysis results, the fire damage criteria, and the grade of fire truck arrival time was established. Response plans for bridge fire accidents according to the risk assessment output has been discussed. Lastly, distances between bridges and fire stations were calculated by GIS network analysis. Based on the suggested assessment model and methodology, sample bridges were selected and graded for the risk assessment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.991-999
• /
• 2018

In urban areas, the proportion of railway traffic in public transport is increasing. The congestion situation is repeated as the passengers concentrate on station and transfer facilities and the inconvenience of the passengers is increasing in terms of safety and convenience. Therefore, the importance of estimating the appropriate area of the station has been emphasized. The area estimation formula used in the metropolitan railway stations currently is a partial modification of the area estimation formula of Japan in the 1970s. It does not reflect changes in the social and cultural environment and patterns of passengers. The technical basis for major decision variables is insufficient. Therefore, the theoretical basis of the area estimation formula and the pedestrian environment satisfaction of the design guideline of metropolitan railway stations were analyzed in order to suggest improvement formula. The improved area estimation formula was verified by conducting field surveys on 5 stations of metropolitan railways and 15 stations of urban railways. The existing area estimation formula is LOS E grade for the main space. However, the LOS D grade is implemented when the improved area estimation formula is applied. Based on the results, the design factors for the area estimation formula are suggested.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.29-36
• /
• 2021

Recently, due to climate change, the slope is increasing, and the risk of steep slope disasters such as the occurrence of slope collapse in the east coast and Busan region in 2019 and the Gokseong landslide in 2020 is increasing. Particularly, most national parks are made up of mountainous areas, and the risk of disasters on steep slopes is increasing. As the ground of the national park is aging and the weathering and jointing of the bedrock are accelerating due to climate change, the slope collapse and rockfall are increasing, and the annual number of visitors is increasing, it is necessary to manage steep slopes adjacent to multi-use facilities with many users. In this study, dangerous steep slopes that affect multi-use facilities in national parks were analyzed using GIS and verified through field surveys. As a process for extracting steep slopes adjacent to multi-use facilities in national parks, the slope was made in DEM and slopes of 34 degrees or higher were extracted. The difference between the maximum and minimum heights of the extracted slopes was used to confirm that the slopes met the standard for steep slopes, and the analysis of the slope direction was used to confirm whether it had an effect on the multi-use facilities. After that, precision aerial images and field photos were analyzed to finally identify risks at 4 sites, and field surveys were conducted. As a result of the field survey, all 4 sites were found to be steep slopes, 3 were graded D and 1 was graded C, so it was confirmed that management was required as a risk of collapse. All steep slopes extracted through GIS were found to be dangerous, so it is judged that the extraction of steep slopes through GIS would be appropriate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.93-101
• /
• 2012

Bridge deck has a role in a comfortable and safe passage of vehicles. At the same time, it preserves upper structure against the abrasion and shearing due to impact of traffic loads in bridges or has a role to protect the plate from off adverse effect of climatic process as rain, chemicals. Currently, the total number of inspected bridges is 6,248 in the general national road and to maintain effectively, Introduction of GPR system mounted in the vehicle has been considered. In this research, the comparison and analysis of bridge deck condition on general national road has been performed with major variations of superstructure type, span lengths, located region and ages by using 'the current status of road bridge and tunnel' that is provided by MLTM(Ministry of Land, Transport and Maritime Affairs). As a result, Condition assessment grade, superstructure type, age and length were derived as a major factor to determine priority for the condition assessment.

• Korean Journal of Comparative Education
• /
• v.22 no.4
• /
• pp.25-49
• /
• 2012

Coping with the problems of school violence, weapon and drug abuses, 'zero tolerance policies' have been adopted in the United States since the 1980's. Authorities have been securing the safety and learning-friendly environment of the school, imposing predetermined penalties on any case of school violence or disruption. It is reported that the school violence rate drops accordingly. However, the policies are criticized for their rather escalating effect due to severe punishments on minor offenses, evidencing no effectiveness worthwhile. As alternatives, 'graduated systems of discipline' meeting minor misbehaviors with less severe consequences or 'early response model' are suggested, without abandoning those main rules of zero tolerance policies. Recently Korean government tries to take charge of school violence, issuing some nation-wide measures such as 'the Comprehensive Measures to Stop School Violence'. This article analyzed major principles and changes of the zero tolerance polices of US case, to induce some policy suggestions for the validity of Korean government's measures implemented under the understanding that "little bullying" is also a "crime" to disclose all school violence.