• Korean journal of food and cookery science
• /
• v.14 no.1
• /
• pp.84-90
• /
• 1998

A research was carried out to determine the formation, contents in foods, and antioxidative effects of conjugated linoleic acid (CLA). CLA was known as a mixture of positional isomer of linoleic acid (LA), that was included in milk, meat, and fish. The formation of CLA from methyl linoleate and soybean oil (SBO) storecd at 20${\pm}$1$^{\circ}C$ was higher than at 40${\pm}$1$^{\circ}C$, and CLA formation from methyl linoleate stored at 20${\pm}$1$^{\circ}C$ was over 13 times higher than early amounts(188 ppm) and was higher than that from SBO. In edible vegetable oils, the content of CLA were the highest in canola oil (CAO, 348 ppm) but were decreased during storage at 40${\pm}$1$^{\circ}C$, while the content of CLA in cotton seed oil (CSO) were 292 ppm, which increased dramatically (1322 ppm) during 28 days of storage at 40${\pm}$1$^{\circ}C$. Because the peroxide value (POV) of CSO at that time was very low (10.05 meq/kg $.$ oil), CLA occurrence of CSO was shown to be very available during storage at temperature. CLA content of milk from a market ranged 293∼2148 ppm, which depended on the manufacturing, companies. In meat, the CLA content was very high in pork (2379 ppm), and among fishes, that of spanish mackerel was the highest (1040 ppm, almost same as beef, which increased greatly (2039 ppm) during boiling with seasoning. Antioxidative effect of CLA on SBO was almost same as that of BHT until 7 days of storage at 40${\pm}$1$^{\circ}C$, but decreased greatly after that period. In case of com oil (CNO), antioxidative effects of CLA were higher than those or BHN and tocopherol, suggesting that the effect was different depending on the kinds of oils used as substrates. During heating at 180${\pm}$1$^{\circ}C$, antioxidative effect of CLA on SBO appeared almost same as those or BHT and tocopherol, and it was also shown greater effects in heating at high temperature (180${\pm}$1$^{\circ}C$) than at low temperature(40${\pm}$1$^{\circ}C$).

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of Nutrition and Health
• /
• v.50 no.3
• /
• pp.246-256
• /
• 2017

Purpose: This study aimed to investigate the association of total dietary antioxidant capacity (TAC) with oxidative stress and metabolic markers among patients with metabolic syndrome according to gender. Methods: A total of 346 subjects aged 30~59 years with two or more risk factors of metabolic syndrome were recruited from a general hospital near Seoul in South Korea between 2010 and 2012 based on data from the medical checkup. Biochemical indices for oxidative stress and metabolic markers were measured. Food consumption data from 3-day food records were linked with the antioxidant capacity database for commonly consumed Korean foods to estimate individual's TAC. Results: Average dietary TAC of the study subjects was 132.0 mg VCE/d/1,000 kcal in men and 196.4 mg VCE/d/1,000 kcal in women. Levels of ${\gamma}$-glutamyltransferase (GGT), systolic blood pressure, diastolic blood pressure, and blood triglycerides were reduced significantly according to increasing TAC in men, but there was no significant trend in women. Intakes of total flavonoids and carotenoids were significantly negatively correlated with GGT (p < 0.05) and d-ROMs (p < 0.01) in men, whereas those of ${\alpha}$-tocopherol (p < 0.05) and ${\gamma}$-tocopherol (p < 0.05) were positively correlated with biological antioxidant potential (BAP) in women. The odds ratio of high oxidative stress indices and abnormal metabolic markers according to TAC level were not significant in either men or women. Conclusion: The results show that dietary TAC was partially associated with oxidative stress and metabolic markers among patients with metabolic syndrome. Further research is required for elucidating the association between dietary TAC and incidence of metabolic syndrome and chronic diseases within a large population in prospective studies.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.803-811
• /
• 2021

In this study, the exposure amount of IASCC test worker was evaluated by applying the process simulation technology. Using DELMIA Version 5, a commercial process simulation code, IASCC test facility, hot cells, and workers were prepared, and IASCC test activities were implemented, and the cumulative exposure of workers passing through the dose-distributed space could be evaluated through user coding. In order to simulate behavior of workers, human manikins with a degree of freedom of 200 or more imitating the human musculoskeletal system were applied. In order to calculate the worker's exposure, the coordinates, start time, and retention period for each posture were extracted by accessing the sub-information of the human manikin task, and the cumulative exposure was calculated by multiplying the spatial dose value by the posture retention time. The spatial dose for the exposure evaluation was calculated using MCNP6 Version 1.0, and the calculated spatial dose was embedded into the process simulation domain. As a result of comparing and analyzing the results of exposure evaluation by process simulation and typical exposure evaluation, the annual exposure to daily test work in the regular entrance was predicted at similar levels, 0.388 mSv/year and 1.334 mSv/year, respectively. Exposure assessment was also performed on special tasks performed in areas with high spatial doses, and tasks with high exposure could be easily identified, and work improvement plans could be derived intuitively through human manikin posture and spatial dose visualization of the tasks.

• Korean Journal of Environment and Ecology
• /
• v.35 no.5
• /
• pp.548-557
• /
• 2021

Cypripedium japonicum Thunb. is an endemic plant in East Asia, distributed only in Korea, China, and Japan. At the global level, the IUCN Red List evaluates it as "Endangered Species (EN)," and at the national level in Korea, it is evaluated as "Critically Endangered Species (CR)." In this study, we investigated the characteristics of the age structure and the sustainability of the population based on the data obtained by demographic monitoring conducted for seven years in the natural habitat. C. japonicum habitats were observed in 7 regions of Korea (Pochoen, Gapyeong, Hwacheon, Chuncheon, Yeongdong, Muju, Gwangyang), and 4,356 individuals in 15 subpopulations were identified. The population size and structure differed from region to region, and artificial management had a very important effect on the size and structural change of the population. Population viability analysis (PVA) based on changes in the number of individuals of C. japonicum showed a very diverse tendency by region. And the probability of population extinction in the next 100 years was 0.00% for Pocheon, 10.90% for Gwangyang, 24.05% for Chuncheon, and 79.50% for Hwacheon. Since the above monitored study sites were located within the conservation shelters, which restricted access by humans, unauthorized collection of C. japonicum, the biggest threat to the species, was not reflected in the individual viability. So, the risk of extinction in Korea is expected to be significantly higher than that estimated in this study. Therefore, it is necessary to reflect population information in several regions that may represent various threats to determine the extinction risk of the C. japonicum population objectively. In the future, we should expand the demographic monitoring of the C. japonicum population known in Korea.

• Asian Journal of Turfgrass Science
• /
• v.17 no.4
• /
• pp.129-146
• /
• 2003

Research was initiated to compare establishment vigor, uniformity, rooting potential and turf quality in sods of cool-season grasses (CSG). Several turfgrasses grown under pure sand soil were tested. Establishment vigor, uniformity, rooting potential and turf quality were evaluated in the study. Turfgrass entries were comprised of three blends from Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.), respectively and three mixtures among them. Differences by treatments were significantly observed in establishment vigor, uniformity, rooting potential and turf quality. Early establishment vigor was mainly influenced by germination speed, being fastest with PR, intermediate with TF and slowest with KB. In a late stage of growth, however, it was affected more by growth habit, resulting in highest with KB and slowest with TF. There were considerable variations in sod uniformity among turfgrasses. Best uniformity among monostand sods was associated with KB, while poorest one with TF. PR sod produced intermediate uniformity between KB and TF. The uniformity of polystand sods of CSG mixtures was inferior to that of monostands of KB, PR and TF, due to characteristics of mixtures comprised of a variety of color, density, texture and growth habit. The greatest potential of sod rooting was found with PR and the poorest with KB. Intermediate potential between PR and KB was associated with TF. In CSG mixtures, it was variable, depending on turfgrass mixing rates. Generally, the higher the PR in mixtures, the greater the sod rooting potential. At the time of sod harvest, however, turfgrass quality of KB was superior to that of PR. because of its characteristics of uniform surface, high density and good mowing quality. These results suggest that a careful expertise based on turf quality as well as sod characteristics like establishment vigor, uniformity and rooting potential be strongly required for the success of golf course or athletic field in establishment.