• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.612-618
• /
• 2006

Surface modification of PTFE by ion irradiation was performed to improve its surface properties, In the case where argon was used to irradiate the PTFE films, an increase in the adhesion strength was observed when the ion fluence was over $1\times10^{15}\;ions/cm^2$, but the surface morphology dramatically changed to a needle-shaped one. However, when we used hydrogen ions under $O_2$ environmental gas, the adhesion strength increased at an ion fluence of $5\times10^{16}\;ions/cm^2$ and the surface morphology by the hydrogen irradiation was not needle-shaped. The surface morphology and adhesion strength of the hydrogen modified PTFE was influenced by the oxygen flow rate. It was confirmed by reflectance measurements that the surface properties of the hydrogen ion irradiated PTFE were superior to those of the argon ion irradiated PTFE.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.28-34
• /
• 2003

Steel tire cords were subjected to plasma polymerization coating of acetylene in order to enhance the adhesion to rubber compounds. Plasma polymerization coating was varied to plasma polymerization coating of acetylene, argon plasma etching+plasma polymerization, or argon plasma. etching+plasma polymerization with Ar carrier gas. Adhesion was evaluated via TCAT samples and compared to those with brass coated tire cord. For durability study, plasma polymer cooled tire cords were aged in lab atmosphere for 1, 3, 5, 10 or 15 days, while TCAT specimens prepared with plasma polymer coated tire cords were aged in distilled water, 10% NaCl solution or $100^{\circ}C$ oven for 1, 2, 3 or 4 weeks. After testing, failure surfaces were analyzed with SEM/EDX. Among the treatments, the highest adhesion was obtained by Ar etching+acetylene plasma. polymerization coating with Ar carrier gas, providing almost same pull-out force as the brass coated tire cords. Upon the aging of the tire cords in the lab atmosphere, brass coated tire cords provided better adhesion than plasma polymer coated tire cords, while the TCAT samples with plasma polymer coated tire cords exhibited similar or slightly superior durability to those with brass coated tire cords.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.33-38
• /
• 2022

In this paper, a simple method of forming a solution-based carbon nanotube (CNT) for use as a conductive material for electronic devices was studied. The CNT thin film coating was performed on the glass by applying the spin coating method and the argon atmospheric pressure plasma process. In order to observe changes in electrical and physical properties according to the number of coatings, samples formed in the same manner from times 1 to 5 were prepared, and surface shape, reflectance, transmittance, absorbance, and sheet resistance were measured for each sample. As the number of coatings increased, the transmittance decreased, and the reflectance and absorptivity increased in the entire measurement wavelength range. Also, as the wavelength decreases, the transmittance decreases, and the reflectance and absorption increase. In the case of electrical properties, it was confirmed that the conductivity was significantly improved when the second coating was applied. In conclusion, in order to replace CNT with a transparent electrode, it is necessary to consider the number of coatings in consideration of reflectivity and electrical conductivity together, and it can be seen that 2 times is optimal.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.81-85
• /
• 1997

철질화물 및 Mo-Si계 규화물을 합성하기 위하여 실온 메카노케미칼 공정을 적용하였다. 메카노케미칼 처리는 고에너지 유성형 볼밀장치를 사용하였고 용기는 진공배기 후 암모니아 혹은 아르곤 가스로 충전시킨 후 벌밀처리를 행하였다. 분말의 특성평가는 XRD, DTA/DSC, SEM 및 EPMA 등에 의하여 행하였다. 철질화물의 경우 실온에서 최대 23.3 at.%N의 $\varepsilon$상 질화물을 얻을 수 있었다. 또한 Mo-SirP의 경우 100시간 메카노케미칼 처리시킴으로서 MiSi$_2$규화물을 합성할 수 있었으며 얻어진 분말의 결정립은 25cm로 매우 미세한 결정립의 분말재료임이 확인되었다.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.99-102
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1255-1256
• /
• 2013

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.49-51
• /
• 2004

레이저 아크 하이브리드 용접에서 보호가스로 헬륨을 사용하였을 때 레이저에 의해 발생하는 금속 증기가 아크 플라즈마의 거동에 미치는 영향에 관하여 시뮬레이션 하였다. 해석에 필요한 기본적인 물성치들은 헬륨과 금속 증기의 부분압에 따라 비율로서 결정하였고 아르곤을 사용하였을 때와 비교하여 헬륨 플라즈마의 특성을 파악하였다. 또한 보호가스의 종류에 따라 레이저 빔의 흡수율을 계산하여 고옥의 플라즈마가 발생할 때 헬륨 보호가스가 적당함을 보였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.45-50
• /
• 1997

I본 논문은 저압 수은-아르곤 기체방전을 이용한 콤팩트 형광램프에 대한 모델링으로서 방전관 내 기체의 반경방향 입자밀도 변화를 고려한 입자평형식, 에너지보존식 및 회로방정식 등의 모델 방정식을 구성하여 이를 상용전원 구동회로와 결합한 13[W] PL 콤팩트 형광램프에 적용하였다. 계산된 전류와 램프전압의 실효치 및 파형을 실험치와 비교하여 모델이 타당함을 보였다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.104-108
• /
• 2007

This paper reviews a simple model and spectroscopic method for extracting plasma electron temperature and argon metastable number density. The model is based on the availability of experimental relative emission intensities of only four argon lines that originate from 4p argon level. In this method, Maxwell-Boltzman distribution for EEDF is assumed and the calculation relies on the accuracy of the cross section. Therefore OES have to be compared with Langmuir probe to establish their practical validity.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.22-23
• /
• 2000

강한 레이저 펄스에 의해 만들어진 플라즈마를 사용하여 연엑스선(soft X-ray, 10-300 $\AA$) 광원을 얻으려는 노력은 주로 고체나 기체 표적에 대한 것이었다. 최근에 이르러 기체의 단열 팽창에서 생기는 원자 송이(atomic cluster)를 표적으로 하는 연구 결과들이 발표되었다. $^{(1).(2)}$ 원자 송이는 국소적으로는 고체에 가까운 밀도를 가지고 있어서 효율적으로 레이저 에너지를 흡수하는 반면, 전체적으로는 기체 상태에 있기 때문에 파편이 적고, 기체의 압력과 온도를 변화시킴으로써 송이의 크기를 조절할 수 있다. (중략)