• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2615-2620
• /
• 2007

This paper describes on pressure drop in a circular pipe of refuse collecting system. The flow characteristics inside the circular pipe are analyzed by three-dimensional Navier-Stokes analysis. In numerical analysis, an organic waste is modeled using the data obtained by site survey. Pressure drop obtained by numerical simulation is compared to the value obtained by experimental measurements for the two kinds of pipe; straight and bended type. The pressure drop obtained by numerical simulation has a good agreement with that of experiments. It is noted that the accurate prediction of pressure drop in the waste pipe is very important to determine the performance of turbo blower used in making a suction pressure in the waste pipe. Especially, the pressure drop for an organic waste is analyzed according to the mass flow rate of waste.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.36 no.5
• /
• pp.28-31
• /
• 2007

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.35-43
• /
• 2016

Recently, the pipeline system for waste transportation has been increasingly constructed as new solution for the waste collection and disposal system by constantly increasing domestic waste which issued as social problem. The pipeline system is constructed through long distance, so proper long-term monitoring system is necessary which available to detect the damage location for the effective maintenance. In this paper, the experimental study is carried out to evaluate the applicability of optical strain gauge sensor based on FBG for the long-term monitoring system. Three test parameters such as pressure leaking, blockage and deformation are considered as typical damages for real-scale pipeline test specimen. In order to measure flexural and volumetric strain and temperature, three FBG sensors are installed at each monitoring sections. From the test results, this study suggested effective methods of sensor installation and arrangement. Also the sensor spacing for the design of monitoring system using FBG sensor is derived by the correlation of distances from deformation between sensor responses.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.4
• /
• pp.55-60
• /
• 2007

This paper describes an evaluation method of pressure drop in a circular pipe of waste collection piping system. Accurate pressure drop in a piping system is very important to determine the capacity of turbo blower, which is one of the main elements in the system. Three-dimensional Navier-Stokes analysis is introduced to analyze the pressure drop in the piping system. Organic waste is selected and modeled using the result of site survey performed in an apartment area. Evaluation method of pressure drop used In the present numerical simulation is performed in the shortened pipe line prior to the calculation of the real system. Throughout the numerical simulation, pressure drop in a waste pipe is obtained and compared to the value determined by analytical method. The pressure drop obtained by numerical simulation has a good agreement with that of the analytic method. It is noted that present evaluation method is effective to determine a pressure drop in the piping system. Detailed flow characteristics inside the pipe line are also analyzed and discussed.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.36 no.5
• /
• pp.7-16
• /
• 2007

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.36 no.5
• /
• pp.17-21
• /
• 2007

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.381-385
• /
• 2009

This paper describes performance characteristics of a centrifugal fan having a different volute casing. The centrifugal fan has a backward blade type, and is used in a refuse collecting system. The flow characteristics inside the components are analyzed by three-dimensional Navier-Stokes analysis, and also compared to the results by experiments. Distributions of pressure and efficiency obtained by numerical simulation has a good agreement with the experimental results. Throughout the numerical simulation of the centrifugal fan, a fan efficiency is increased by decreasing local losses in the blade passage. It is found that the fan efficiency is enhanced by decreasing the distance between the shroud of a impeller and casing. Detailed flow analysis is also analyzed and discussed using the results obtained by numerical simulation.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.427-432
• /
• 2009

This article deal with an overview of food waste treatment methods in Korea. Garbage trucks are operated manually by garbage workers who pick up the food wastes after food waste is placed in plastic bags by the road sides. However, there are a lot of problems such as, the smell from the split bags and the leachate, the loss of much energy and the complaints regarding the establishment new rubbish tips from the residents in the surrounding area. It also highlights our society's waste of resources. Although the new pneumatic waste transfer system or the dry method seem to have improved some of the environmental conditions, it still bears some problems, for example, the lack of reuse and recycling of resources and the economic problems. We have been analysed the advantages and disadvantages between the existing food waste system and the pneumatic waste transfer system. And the dry method and disposer were discussed. The results will indicate how the disposer can improve more than the existing systems and will provide the evidence to support.