• Conservation Science in Museum
• /
• v.3
• /
• pp.71-78
• /
• 2001

The airtightness of museum cases in museums was measured by using CO₂ tracing gas, but it has been pointed that it has a problem with measuring the airtightness of a museum case which has a hole inside before it is used or while is being used. So studies tried to come up with alternatives which make it possible to measure the airtightness of a museum case before it is used or while it is being used if necessary by indirectly measuring the airtightness of the museum case without changing its form. Indirect measuring is done by measuring the change of Art-sorb weight and the change of temperature and humidity inside the museum case. Experiments were made for 12 days with three builtin wall case installed at the same place without turning on the lights but with Art-sorb and the data logger of temperature and humidity put into museum case. The change rate was produced with the change of temperature and humidity inside the museum case divided by that of those around museum case. As a result, the temperature change rate of museum case A(0.67) was lower than that of museum case B(0.69) or museum case C(0.79). The humidity change rate of museum case A(0.12) was lower than that of museum case B(0.19) or museum case C(0.72) showing that its airtightness was the best. Also in the direct airtightness measurement by CO₂ tracing gas, the air exchange rate was compared with the humidity change rate by Art-sorb in the indirect measurement.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.10
• /
• pp.447-454
• /
• 2015

This paper proposes geographical name denoising by machine learning of event detection based on twitter. Recently, the increasing number of smart phone users are leading the growing user of SNS. Especially, the functions of short message (less than 140 words) and follow service make twitter has the power of conveying and diffusing the information more quickly. These characteristics and mobile optimised feature make twitter has fast information conveying speed, which can play a role of conveying disasters or events. Related research used the individuals of twitter user as the sensor of event detection to detect events that occur in reality. This research employed geographical name as the keyword by using the characteristic that an event occurs in a specific place. However, it ignored the denoising of relationship between geographical name and homograph, it became an important factor to lower the accuracy of event detection. In this paper, we used removing and forecasting, these two method to applied denoising technique. First after processing the filtering step by using noise related database building, we have determined the existence of geographical name by using the Naive Bayesian classification. Finally by using the experimental data, we earned the probability value of machine learning. On the basis of forecast technique which is proposed in this paper, the reliability of the need for denoising technique has turned out to be 89.6%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.213-213
• /
• 2016

수문조사기기의 검정은 수문조사에 활용할 기기를 일관되고 표준화된 기준으로 검사하여 수문조사에 적합한 기기인지 확인하는 것이다. 이러한 검정은 국가수문자료의 신뢰도를 높이고 유지하는 기본적이고 중요한 업무이다. 검정대상기기는 강수량측정기기, 유속측정기기, 수위측정기기, 부유사측정기기, 토양수분측정기기, 증발산량측정기기로 총 6가지이며, 2009년부터 국토교통부 위탁사업으로 한국건설기술연구원(유량조사사업단)에서 수행하고 있다. 특히 유량조사사업단에서는 유속측정기기를 제외한 나머지 5개 수문조사기기에 대해 검정을 수행하고 있다. 연도별로 2009년부터 2015년까지 98대, 334대, 572대, 539대, 359대, 682대, 690대로 총 3,274대를 검정하였고, 관측기종별로 강수량 1,579대, 수위 1,589대 부유사 23대, 토양수분 33대, 증발산량 50대이다. 신청기관별로는 국토교통부(홍수통제소) 1,847대, 환경부(국립환경과학원) 4대, 한국건설기술연구원(유량조사사업단 포함) 81대, K-water 338대, 한국수력원자력(주) 91대, 일반업체 913대에 대한 검정을 실시하였다. 검정을 실시한 강수량측정기기 1,579대 중 보정없이 합격된 기기는 1,495대, 허용오차기준에 미달되어 보정 실시 후 합격한 기기는 76대이며, 불합격 처리된 기기는 8대이다. 수위측정기기는 합격이 1,586대, 기준에 미달되어 불합격된 기기가 2대로 나타났다. 강수량측정기기의 각 연도대비 통계분석 결과 보정률은 2009년 97대 중 8대(8.2%), 2010년 194대 중 3대(1.5%), 2011년 180대 중 24대(13.3%), 2012년 175대 중 17대(9.7%), 2013년 165대 중 15대(9.1%), 2014년 547대 중 8대(1.5%), 2015년 221대 중 9대(4.1%)로 다소 낮은 수치로 나타났다. 이처럼 보정률이 낮게 나타난 이유는 관할기관의 검정을 위한 유지관리 및 사업자의 사전검사 등을 통해 감소한 것으로 판단되며, 이와 같은 결과는 수문자료의 품질 및 신뢰도 향상으로 이어졌다. 그러나 여전히 선진국에 비해 수문조사기기 검정의 중요성에 대한 인프라 구축이 미흡한 실정이다. 수문조사기기 검정의 선진국이라 할 수 있는 미국의 경우 USGS에서 HIF(Hydrogical Istrumentation Facility)라는 별도 조직을 운영하여 관측기기의 렌탈, 수리, 교정 및 검정, 개발, 교육 등 이러한 작업을 일괄 수행하고 있고 조직 내 자체 시설로 수중펌프 시험소, 자연과 유사한 환경에서 테스트 하는 장소, 대형온도챔버 등을 갖추고 있으며, 이러한 시설을 이용하여 기기의 교정 및 검정, 연구 등을 현장과 비슷한 환경에서 다양한 실험을 통해 검정방법을 비교, 분석하는 것을 볼 수 있다. 현재 우리나라의 수문조사기기는 다양한 방법으로 현장에 설치되어 검정방법의 다양성이 요구된다. 향후 우리나라도 HIF와 같이 다양하고 선진화된 시설과 기술을 개선하고 다각적인 시험 과정을 통해 수준 높은 검정방법체계를 갖추려는 노력이 필요하다.

• Journal of Food Hygiene and Safety
• /
• v.36 no.5
• /
• pp.382-391
• /
• 2021

The purpose of this study was to investigate the microbial contamination of red pepper powder distributed within Gyeonggi province in 2020 according to the place of purchase, the country of origin, and whether the HACCP certification and sterilization were conducted, and to evaluate the change of quality according to the storage method. Upon collecting and analyzing 100 samples, Bacillus cereus was detected in 3 cases (2 cases in large supermarkets and 1 case in traditional markets) and Clostridium perfringens in 27 cases (9 cases in large supermarkets and 18 cases in traditional markets). The levels of the total aerobic bacteria were not significantly different between the red pepper powder purchased from large supermarkets and traditional markets. However, the frequency of red pepper powder exceeding 7 log CFU/g of total aerobic bacteria was higher in traditional markets than in large supermarkets. Microbial quality was not significantly different regardless of the storage temperature (30℃, 4℃, -20℃) and the packaging method (zipper bag and clean bag) after 7 months of purchase. However, the moisture contents and ASTA color value of red pepper powder stored at 30℃ decreased remarkably after 3 months of storage. It is desirable to store red pepper powder in a refrigerator or freezer in order to maintain its quality during long-term storage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.27-45
• /
• 2021

The purpose of this study is to trace the path of policy for urban parks and greenbelts (PUPG) pursued by Seoul Mayor Kim Hyeon-ok, who was a protagonist of Seoul's modernization and to reveal the policy's characteristics. A high modernism perspective was projected to advance his PUPG discussion. High modernism was an unavoidable phenomenon that appeared in post-war urban reconstruction projects and emerged in the form of a belief that the national elite creates the ideal social order and rational planning. Its characteristics were to build with legibility, immediacy, and convenience by power, with private participation and profit creation, while realizing the spectacle of "the city being built". As a high-modernist, Seoul Mayor Kim Hyun-ok's urban planning aimed to deal with the booming population and the expansion of Seoul's territory. Although his PUPG extended the parks to the outskirts of Seoul, he showed a dualistic attitude, diverting parks away from the city center. On the other hand, he induced the participation of the private sector to create parks. However, he showed the other side of modernization, eliminating the placeness and excluding related systems. The path taken by Mayor Kim Hyun-ok's PUPG was started to respond to population growth and resolve the encroachment of parks. The ultimate goal was to accept the realization of urban planning and experiment with non-financial methods. The characteristics of his PUPG reflecting high modernism were: First, elites were represented in the National Land Planning Association, HURPI, and Jang Moon-gi participated; second, legibility was ensured by using east-west and north-south axes, elevation standards, and rational planning. Third, parks were quickly released to respond to the rapid urban change. Fourth, it showed off events and spectacles to attract private capital.

• Ecology and Resilient Infrastructure
• /
• v.8 no.3
• /
• pp.143-153
• /
• 2021

The growth inhibition effects of M. aeruginosa were verified using large volume (7.2 L) of algae samples and ultrasonication (high frequency of 1.6 MHz vs. low frequency of 23 kHz) in lab-scale experiment. The chlorophyll-a (chl-a) and cell number decreased gradually after 6 hr sonication with high frequency of 1.6 MHz whereas both decreased sharply after 6 hr sonication with low frequency of 23 kHz. Additionally, the first order degradation coefficient (k) values after sonication were greater than those during sonication. These results indicate that relatively low sonication energy per volume may affect the cell membrane and internal organs of M. aeruginosa in a slow and retarded manner and resulted in gradual decrease of cell numbers of M. aeruginosa. Based on the comparison of chl-a and cell number of M. aeruginosa after sonication, low frequency of 23 kHz is superior for growth inhibition of M. aeruginosa, since low frequency of 23 kHz easily penetrates the cell membrane and ruptures the internal organs including gas vesicles. As is evident in SEM and TEM images, ruptured cell membranes were clearly observed for low frequency of 23 kHz. Finally, the microcystin-LR in water is not detected and considered to be harmless in aquaculture systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.379-386
• /
• 2021

This study was undertaken to develop a cascade-type continuous culture system (CCCS) that combines both ICT and biotechnology (BT), for the mass production of microalgae. This system is capable of maintaining the essential culture conditions of pH, temperature, carbon dioxide, and illuminance control, which are key parameters for the growth of microalgae, and is economical for producing microalgae regardless of the season or location. It has the added advantage of providing stable and high productivity. In the current study, this system was applied to culture microalgae for 71 days, with subsequent analysis of the experimental data. The initial O.D. of the culture measured from incubator 1 was 0.006. On the 71st day of culture, the O.D.s obtained were 0.399 (incubator 1), 0.961 (incubator 2), 0.795 (incubator 3), and 0.438 (incubator 4), thereby confirming the establishment of continuous culture. Thus, we present a smart-farm based on ISMC (in-situ monitoring and control) for a mass culture method. We believe that this developed technology is suitable for commercialization, and has the potential to be applied to hydroponics-based cultivation of microalgae and cultivation of high-value-added medicinal plants as well as other plants used in functional foods, cosmetics, and medical materials.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.7
• /
• pp.279-286
• /
• 2021

Recently, We are carrying out a policy of physical distancing of at least 1m from each other to prevent the spreading of COVID-19 disease in public places. In this paper, we propose a method for measuring distances between people in real time and an automation system that recognizes objects that are within 1 meter of each other from stereo images acquired by drones or CCTVs according to the estimated distance. A problem with existing methods used to estimate distances between multiple objects is that they do not obtain three-dimensional information of objects using only one CCTV. his is because three-dimensional information is necessary to measure distances between people when they are right next to each other or overlap in two dimensional image. Furthermore, they use only the Bounding Box information to obtain the exact coordinates of human existence. Therefore, in this paper, to obtain the exact two-dimensional coordinate value in which a person exists, we extract a person's key point to detect the location, convert it to a three-dimensional coordinate value using Stereo Vision and Camera Calibration, and estimate the Euclidean distance between people. As a result of performing an experiment for estimating the accuracy of 3D coordinates and the distance between objects (persons), the average error within 0.098m was shown in the estimation of the distance between multiple people within 1m.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.21-27
• /
• 2019

The study empirically analyzed the effects of content attitudes and recall on digital signage advertising appeal (information appeal vs. image appeal) and interactivity level (low vs. high). As a result, first, it was found that a moderately low level of interactivity had a positive effect on content attitudes and recall than when the level of digital signage was extremely high. In addition, at moderately low levels of interactivity, information appeals had higher content attitudes and recalls than image appeals. Second, the content of image appeal has a positive effect on attitude when the digital signage level of interactivity is high, and the image recall ad and information appeal ad have negative effects on recall. Third, the low level of interactivity of digital signage has a positive effect on the content attitude and recall of information appeal. With the advent of digital media in recent years, concerns about how to construct the level of interactivity and information content on a strategic level are increasing in practice. The results of this study are expected to suggest the direction of the strategic grounds for this.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.29-35
• /
• 2022

This paper proposes a fuel cell education framework installed on a Metaverse environment, which is to reduce the burden of education costs and improve the effect of education or learning. This Meta-Fuel cell platform utilizes the Unity 3D Web and enables not only theoretical education but also hands-on training. The platform was designed and developed to accommodate a variety of unit education contents, such as ppt documents, videos, etc. The platform, therdore, integrates ppt and video demonstrations for theoretical education, as well as software content "STACK-Up" for hands-on training. Theoretical education section provides specialized liberal arts knowledge on hydrogen, including renewable energy, hydrogen economy, and fuel cells. The software "STACK-Up" provides a hands-on practice on assembling the stack parts. Stack is the very core component of fuel cells. The Meta-Fuelcell platform improves the limitations of face-to-face education. It provides educators with the opportunities of non-face-to-face education without restrictions such as educational place, time, and occupancy. On the other hand, learners can choose educational themes, order, etc. It provides educators and learners with interesting experiences to be active in the metaverse space. This platform is being applied experimentally to a education project which is to develop advanced manpower in the fuel cell industry. Its improvement is in progress.