• Title/Summary/Keyword: 실시간 자료 수집 장치

Search Result 29, Processing Time 0.03 seconds

Research on estimation of water-intake using amount of electricity consumption by pumping (전력 사용량을 활용한 하천수 취수량 산정방법 연구)

  • Jin, Hwan Suk;Roh, Youngsin;Cha, Jun Ho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.368-372
    • /
    • 2018
  • 하천수의 실시간 자료수집 목적으로 전력량계의 전력사용량 변화를 계측하여 양수량을 산정하는 것이 경제적인 자료수집방안이 될 것으로 판단되어 전력사용량의 실시간 계측 및 전송이 가능한 '전력량 전송시스템'을 개발하여 여주시(여주대교)~여주시(이포대교) 관측소 구간 내 농업용수 취수시설인 상백리 양수장에서 적용성을 평가하였다. '전력량 전송시스템'의 정상적인 자료수집을 판단하기 위해 실내실험을 수행한 결과 전송자료 648,000개 중 수집된 자료는 647,964개로 평균 오차율 0.01%를 나타내며 현장적용이 가능함을 입증하였다. 개발된 '전력량 전송시스템'을 상백리 양수장에 설치하여 6개월간 젼력량 사용자료를 취득하였으며, CCTV를 이용하여 현장자료를 모니터링하였다. 서버전송자료와 현장전력량자료를 비교한 결과 누적전력량은 일치하였으며, '전력량 전송장치'를 이용한 전력사용량의 실시간 계측이 가능함을 확인하였다. 능서1 양수장에서 수집된 전력량 자료와 초음파유속계로 계측된 양수량 자료를 활용하여 전력량-양수량관계식을 개발하였다. 개발된 전력량-양수량관계식으로 환산된 유량을 초음파유속계 유량과 비교한 결과, 월별 오차는 최대 8.0%, 평균 4.0%로, 하천수 사용실적 보고량의 최대 24.4%, 평균 7.4%보다 비교적 잘 일치하는 것으로 나타났다. 초음파유속계를 이용한 양수량 산정방법은 수로내 유속과 수위변화를 직접 계측하여 정도 높은 유량산정이 가능하지만 초기설치비용 및 유지관리 비용이 소요되므로 모든 취수시설에 적용하는 것은 불가능하다. '전력량 전송시스템'은 기 설치된 전자식 전력량계를 활용하기 때문에 초기 설치비용이 저렴하며 실시간 자료수집이 가능한 장점이 있다. 따라서, '전력량 전송시스템'을 이용한 전력량자료의 수집과, 전력량-양수량관계식의 개발이 실시간 하천수 사용량 수집에 적용할 수 있는 가장 경제적인 대안으로 판단된다.

  • PDF

Very Large Database Construction for Historical Traffic Data (교통 이력 자료를 위한 대용량 데이터베이스 구축)

  • Song, Sookyung;Cheong, Sujeong;Lee, Minsoo;Namgung, Sung
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.11a
    • /
    • pp.290-292
    • /
    • 2007
  • 현재 한국도로공사에서 운영하는 고속도로 교통관리시스템(FTMS)과 우회도로 교통정보시스템(ARTIS)은 차량 검지 장치와 CCTV 를 통해 실시간 교통 자료를 수집하고, 도로전광표지(VMS), 방송, 인터넷 등 다양한 매체로 교통 정보를 제공하는 시스템이다. 이러한 시스템들은 매일 도로에서 수집되는 엄청난 양의 교통 자료를 실시간 교통 정보 제공하는데 목적을 두고 있어, 교통 자료를 가공하고 처리하여 분석을 수행하는 연구 환경을 제공하는데 어려움이 많다. 본 논문에서는 여러 시스템으로부터 대용량의 교통 자료를 가져와 하나의 통합 데이터베이스로 구축하고, 이를 통해 얻은 교통 이력 자료를 연구할 수 있는 환경을 제안한다.

Investigation of current velocity in Reservoir (저수지 수체의 유속특성 조사)

  • Lee, Yo-Sang;Han, Kyung-Min;Na, Yu-Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.84-84
    • /
    • 2011
  • 저수지에서 수체의 거동정보는 저수지관리를 위해 매우 중요하며, 이를 수리 및 수질모형에 적용하여 다양한 예측에 활용할 수 있는 기본적인 정보이다. 그러나 저수지 수체의 흐름은 매우 느리고 조사시기에 따라 혹은 수심에 따라 영향을 받으며, 바람 등 외부요인에도 영향을 받게 됨으로 정확한 측정에 많은 어려운 문제가 있다. 따라서 보다 정확한 측정을 위해서는 최신의 기술이 적용되어야 한다. 현장조사에 적용한 저수지 수체거동조사장비(drifter)는 수체의 유동을 관측하는 장치로 GPS 및 Drogue를 장착한 장치가 저수지 수체의 흐름에 따라 이동하면서 위치정보를 무선통신으로 실시간 전송할 수 있도록 만들어진 장치이다. 수체흐름 측정장치는 크게 수체거동정보 생산부이 시스템과 수집서버 및 데이터베이스 서버로 구성되어 있다. 현장 조사시에는 부이에 장착되어 있는 GPS를 통해 현재의 위치가 매번 정해진 시간 간격마다 본체 내부의 메모리에 저장되며, 측정자가 설정한 시간간격으로 위치정보를 수신국으로 전송하도록 구성되어 있다. 수체이동부이의 데이터 수신은 CDMA를 통해 송신된 메일 데이터를 자체적으로 수집하여 데이터형태로 변환한 뒤 실시간으로 표출하고 저장되며, 최대 10개의 부이를 동시에 추적 및 모니터링할 수 있게 구성되어 있다. 본 연구는 용담댐저수지에서 평갈수기 및 풍수기로 구분하여 수체거동을 조사하였다. 평갈수기 조사는 2010년 4월부터 6월까지 총 3차례에 걸쳐 실시하였으며, 풍수기 조사는 8월에 3차례에 걸쳐 실시하였다. 수집된 자료에 의하면 평갈수기 drifter의 평균 속도는 2.25 cm/sec, 최고 속도는 3.46 cm/sec, 최저 속도는 1.15 cm/sec로 나타났으며, 풍수기 조사에서는 평균 속도 2.0 cm/sec, 최고 속도는 2.5 cm/sec, 최저 속도는 1.29 cm/sec로 조사되어 평갈수기와 풍수기간 저수지 수체의 이동속도는 유사한 것으로 평가되었다. 그러나 수기별 조사는 보다 더 많은 정보가 필요하며, 수심에 따른 차이도 있을 것으로 판단되어 좀더 다양한 조사가 수행되어야 보다 정확한 결과를 도출할수 있을 것으로 판단된다.

  • PDF

A Design of Small Size Sensor Data Acquisition and Transmission System (소형 센서 데이터 수집 및 전송 시스템 설계)

  • Lim, Joong-Soo
    • Journal of Convergence for Information Technology
    • /
    • v.9 no.1
    • /
    • pp.136-141
    • /
    • 2019
  • In this paper, we describe the design of a small size data acquisition system with STM32 processor based on Cortex-M4. The system is used for the sensor devices to collect raw data on production lines at factory and send them to the server computer in real time. Also the system is designed to easily acquisite various kinds of data collected from various sensors with the digital signal input unit, the analog signal input unit, the digital signal output unit and the analog signal output unit This small data acquisition system will contribute to the improvement of the quality of precision products in the industrial field by collecting various data in real time and transmitting data at high speed.

GPS/INS Integration and Preliminary Test of GPS/MEMS IMU for Real-time Aerial Monitoring System (실시간 공중 자료획득 시스템을 위한 GPS/MEMS IMU 센서 검증 및 GPS/INS 통합 알고리즘)

  • Lee, Won-Jin;Kwon, Jay-Hyoun;Lee, Jong-Ki;Han, Joong-Hee
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.27 no.2
    • /
    • pp.225-234
    • /
    • 2009
  • Real-time Aerial Monitoring System (RAMS) is to perform the rapid mapping in an emergency situation so that the geoinformation such as orthophoto and/or Digital Elevation Model is constructed in near real time. In this system, the GPS/INS plays an very important role in providing the position as well as the attitude information. Therefore, in this study, the performance of an IMU sensor which is supposed to be installed on board the RAMS is evaluated. And the integration algorithm of GPS/INS are tested with simulated dataset to find out which is more appropriate in real time mapping. According to the static and kinematic results, the sensor shows the position error of 3$\sim$4m and 2$\sim$3m, respectively. Also, it was verified that the sensor performs better on the attitude when the magnetic field sensor are used in the Aerospace mode. In the comparison of EKF and UKF, the overall performances shows not much differences in straight as well as in curved trajectory. However, the calculation time in EKF was appeared about 25 times faster than that of UKF, thus EKF seems to be the better selection in RAMS.

A Study of Relative Feeder-Cable Length and Vehicle Detection Length of Loop Detector (루프검지기의 휘더선길이와 차량검지길이의 관계 연구)

  • Oh, Young-Tae;Kim, Nam-Sun;Kim, Soo-Hee;Song, Ki-Hyuk
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.3 s.74
    • /
    • pp.85-94
    • /
    • 2004
  • Loop detection systems have been used in real-time signal control system to collect traffic information for estimating queue lengths. The queue length algorithm uses speed as a key variable estimated from occupancy time and average vehicle length. The measurement of average vehicle length is affected from the lengths of feeder cable, but their effects have not yet been evaluated. In this study, the variability of average vehicle length due to the lengths of feeder cable is assessed through a field study, and a practical guidelines is proposed. By applying this result, the operational performance of real-time signal control system could be improved.

The Study of the Graph Activity of Gifted Elementary Students Using CBR (CBR을 활용한 초등 영재 학생의 그래프 활동에 관한 연구)

  • Kang, Young Ran;Cho, Cheong Soo
    • School Mathematics
    • /
    • v.17 no.1
    • /
    • pp.65-78
    • /
    • 2015
  • This study has analyzed the effect of graph activity using CBR on the graphic ability through the observation on the 4 math-gifted 5th grade students. The study had designed the graph activity class using CBR based on the theories of graph and progressed it twice for 40 minutes, respectably. The recorded videos of the classes and the interviews of students were collected for analyzing the data, and 2 weeks later, post inspection using the same questionnaire was held for the comparative analysis on the errors that the students had made in the interpretation of the graph. According to the results of this study, the students were able to understand the flow change of the graph, interpret the relationship between variables, and contextualize the dependent variables.

Short-Term Impact Analysis of DTG Installation for Commercial Vehicles (사업용 자동차의 DTG 설치 단기 효과분석)

  • Lee, Seok-June;Lee, Chungwon
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.11 no.6
    • /
    • pp.49-59
    • /
    • 2012
  • Recently, various alternatives for safety and efficiency of commercial vehicles have been considered, and one of the new alternatives is the application of a digital tachograph. In Korea, the installation of a digital tachograph to commercial vehicles was regulated from 2011 and Korea Transportation Safety Authority developed e-TAS to analyze the monitoring data from digital tachographs installed in the order of 100 commercial vehicles. This study performs the potential impact analysis of the DTG installation, which includes a trend of dangerous driving, a trend of traffic accidents and cost-effective analysis, a trend of fuel consumption and cost-effective analysis, a cost-effective analysis of social benefits using e-TAS data. Depending on the frequency of dangerous driving, the participants are divided into three groups; high-dangerous group, average-dangerous group and low-dangerous group. The high-dangerous driving group shows lower km/liter than the low-dangerous driving group by 15% for buses and taxis and by 30% for trucks. About $CO_2$ emission, the difference becomes bigger; 25%, 25% and 42% for buses, taxis and trucks, respectively. Although this study is a short-term period analysis, the methodology will be applicable for the long-term period analysis with larger data.