• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.91-96
• /
• 1997

기존의 교통 신호처리에 있어서는 교차로를 통과하는 차량의 숫자만으로 교통량의 많고 적음을 표시하였으나 정확한 교통 신호 처리에 있어서는 상대교차로의 지연차량수, 진입로의 길이 및 폭등이 고려되어야만 지체시간을 줄이는데 효과적임을 알 수 있다. 본 논문에서는 정확한 교통제어를 위해 진입로의 길이와 차량의 형태등을 고려한 도로상의 점유정도를 퍼지센서 알고리즘을 통해 혼잡량이라는 새로운 상징적 값으로 도출하고 실시간 구현을 위해 룩업 테이블 방식의 퍼지하드웨어를 구성하여 기존의 교통신호 처리 제어와 비교하여 차량 지체시간이 줄어듬을 보였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.135-150
• /
• 2002

The basic assumption of analytical Dynamic Traffic Assignment models is that traffic demand and network conditions are known as a priori and unchanging during the whole planning horizon. This assumption may not be realistic in the practical traffic situation because traffic demand and network conditions nay vary from time to time. The rolling horizon implementation recognizes a fact : The Prediction of origin-destination(OD) matrices and network conditions is usually more accurate in a short period of time, while further into the whole horizon there exists a substantial uncertainty. In the rolling horizon implementation, therefore, rather than assuming time-dependent OD matrices and network conditions are known at the beginning of the horizon, it is assumed that the deterministic information of OD and traffic conditions for a short period are possessed, whereas information beyond this short period will not be available until the time rolls forward. This paper introduces rolling horizon implementation to enable a multi-class analytical DTA model to respond operationally to dynamic variations of both traffic demand and network conditions. In the paper, implementation procedure is discussed in detail, and practical solutions for some raised issues of 1) unfinished trips and 2) rerouting strategy of these trips, are proposed. Computational examples and results are presented and analyzed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.62-68
• /
• 1998

In this paper, we proposed the design of the intelligent traffic control system by using multiprocessor architecture. The inter-processor communication of the architecture is implemented by sharing the serial communication channel. In comparing the conventional traffic control system using single processor architecture, the proposed system uses multiple processors controlling the sub systems such as the signal lights, traffic measurement unit, auxiliary signal lights and peripherals. The main processor controls the communication among the processors and the communication protocol link to the central control center at remote site. The proposed architecture reduces the load and simplifies the program of each processor and enables the real time processing of the add-on features of intelligent traffic control systems. The architecture is implemented and the common channel inter-processor communications and the real time operation is experimented .experimented .

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.148-154
• /
• 2014

This paper suggests a new system based on image-processed information which is designed to control traffic light by measuring two-way traffic at the same time with a surveillance camera. With this system, the existing way of using one camera for one lane or loop coil will be improved to the more effective way of using only one camera to monitor a two-way, 8 lane roads statistically. Car images can be detected clearly even in irregular condition because of the background updating in real time. In addition, more accurate measurement is possible to users by selecting extra attention-needed regions. The automatic traffic light controlling algorithm, suggested in this paper, will prevent users and drivers from wasting their time and energy by controlling the number of traffic in advance.

• Journal of Korean Society of Transportation
• /
• v.15 no.2
• /
• pp.51-66
• /
• 1997

실시간 변화하는 교통상황을 파악하고 교통혼잡을 완화시키려는 각종 교통정책들을 개발하고 평가하기 위하여 동적 통행배정모형에 대한 연구가 지속되고 있으며 상당한 성과 를 이루고 있다. 그러나 이론적인 어려움과 계산량과 과다로 기존의 모형들은 대부분 단순 가로망을 대상으로 적용되어 왔으며 대규모 가로망에 적용하는 데는 상당한 어려움을 겪고 있다. 본 연구의 목적은 실제 가로망에 쉽게 적용할 수 있는 휴리스틱 동적 통행배정모형을 개발하고 이를 해석할 수 있는 알고리즘을 개발하는 데 있다. 개발되는 모형은 변동부등식 (variational inequality)으로 구축되며 알고리즘은 휴리스틱 알고리즘(heuristic disagonalized algorithm)을 개발한다. 예제 가로망을 대상으로 개발된 모형을 평가하며 도출된 해가 Wrdrop의 균형해(equilibrium)임을 보인다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.153-154
• /
• 2010

최근 GPS를 이용한 위치기반서비스(LBS)는 일상생활의 큰 변화를 가져왔다. 이러한 LBS 중에서도 가장 흔히 접할 수 있는 것이 차량 항법용 장치인 네비게이션이다. 초창기의 네비게이션이 단순히 목적지까지 가기 위한 가장 짧은 도로를 안내해 주는 것이 목적이었다면 최근에는 TPEG과 같은 실시간 교통 상황 안내, 이용자 선호도를 고려한 경로탐색, 에코 드라이빙과 같은 좀 더 높은 수준의 서비스가 개발되고 있다. 하지만 현재의 차량항법 시스템은 교통상황 안내 이외에는 현실적인 도로상황 반영이 어렵고 시간대별 통행량의 차이가 큰 국내 교통상황에 대한 고려가 미흡하다. 또한 교통정보 수집장치가 설치되지 않은 도로는 교통상황 안내마저도 제공되지 않는다. 본 논문에서는 이러한 문제점을 개선하기 위하여 임베디드 DBMS를 이용하여 과거 통행이력정보를 저장하고 활용할 수 있도록 도로망 DB스키마를 정의하였다. 그리고 이를 탐색경로의 소요 시간 산출에 활용하여 실제적인 도로상황을 고려한 경로안내 방법을 제안한다. 실제주행이력은 네트워크 데이터의 링크단위로 관리되며 저장된 주행이력은 경로탐색에 필요한 정보인 진입시각, 진출시각, 요일, 통행횟수로 관리된다. 이렇게 단말기에 저장된 주행이력은 중앙DB를 통해 사용자간 공유가 가능하고 향후에는 실시간 동기화를 통해 더욱 신뢰도 높은 경로탐색에 활용될 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.50-51
• /
• 2012

Gyeonggi-do Gwangju urban areas broadband traffic information base expansion project was initiated in June '11 for global Gwangju. SK C & C consortium was successfully completed in April '12. Gwangju has secured the means of effective response to 24-hour traffic flow and incident through this project. And by providing real-time traffic information, traffic distributed effects brought.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.34-44
• /
• 2007

Many urban cities deployed ITS technologies to improve the efficiency of traffic operation and management including a real-time franc control system (i.e., COSMOS). The system adopted loop detector system to collect traffic information such as volume, occupancy time, degree of saturation, and queue length. This paper investigated the applicability of detector information within COSMOS to represent the congestion level of the links. Initially, link travel times obtained from the field study were related with each of detector information. Results showed that queue length was highly correlated with link travel time, and direct link travel time estimation using the spot speed data produced high estimation error rates. From this analysis, a procedure was proposed to estimate congestion level of the links using both degree of saturation and queue length information.

• The Journal of Bigdata
• /
• v.4 no.2
• /
• pp.207-220
• /
• 2019

Recent developments in information and communication technology has enabled the deployment of sensor based data to provide real-time services. In Korea, The Korea Transportation Safety Authority is collecting driving information of all commercial vehicles through a fitted digital tachograph (DTG). This information gathered using DTG can be utilized in various ways in the field of transportation. Notably in autonomous driving, the real-time analysis of this information can be used to prevent or respond to dangerous driving behavior. However, there is a limit to processing a large amount of data at a level suitable for real-time services using a traditional database system. In particular, due to a such technical problem, the processing of large quantity of traffic big data for real-time commercial vehicle operation information analysis has never been attempted in Korea. In order to solve this problem, this study optimized the new database server system and confirmed that a real-time service is possible. It is expected that the constructed database system will be used to secure base data needed to establish digital twin and autonomous driving environments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.287-296
• /
• 2015

Recent navigation systems provide quick guide services, based on processing real-time traffic information and past traffic information by applying predictable pattern for traffic information. However, the current pattern for traffic information predicts traffic information by processing past information that it presents an inaccuracy problem in particular circumstances(accidents and weather). So, this study presented a more precise predictive traffic information system than historical traffic data first by analyzing route search data which the drivers ask in real time for the quickest way then by grasping traffic congestion levels of the route in which future drivers are supposed to locate. First results of this study, the congested route from Yang Jae to Mapo, the analysis result shows that the accuracy of the weighted value of speed of existing commonly congested road registered an error rate of 3km/h to 18km/h, however, after applying the real predictive traffic information of this study the error rate registered only 1km/h to 5km/h. Second, in terms of quality of route as compared to the existing route which allowed for an earlier arrival to the destination up to a maximum of 9 minutes and an average of up to 3 minutes that the reliability of predictable results has been secured. Third, new method allows for the prediction of congested levels and deduces results of route searches that avoid possibly congested routes and to reflect accurate real-time data in comparison with existing route searches. Therefore, this study enabled not only the predictable gathering of information regarding traffic density through route searches, but it also made real-time quick route searches based on this mechanism that convinced that this new method will contribute to diffusing future traffic flow.