• Title/Summary/Keyword: 실습선 가야호

Search Result 6, Processing Time 0.028 seconds

A Study on Motion Sickness Incidence due to Changes in the Speed of the Training Ship Kaya (실습선 가야호의 선속 변화에 따른 뱃멀미 지수에 관한 연구)

  • Han, Seung-Jae;Ha, Young-Rok;Lee, Seung-Chul;Lee, Chang-Woo;Kim, In-Chul
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.2
    • /
    • pp.228-233
    • /
    • 2014
  • In this paper, the motion performance in waves for the training ship Kaya of Pukyong National University is obtained by using a computer program based on Strip method. To guarantee the pleasant seafaring in ocean, the vertical acceleration of ship motion is calculated according to the location of the ship. The results of calculation by changes of ship speed are compared with the guideline of MSI(Motion Sickness Incidence). The degree of motion sickness is shown and discussed through the comparison between calculated vertical acceleration spectrum and MSI guideline. The computational results of MSI were as follow; when ship speed increased in the order of 5 knots, 10 knots, 12 knots and encounter angle became the bow quartering sea of $120^{\circ}$ compared to $180^{\circ}$ and $150^{\circ}$, the vertical acceleration values grew higher.

A Study on the Collision-avoidance Action of the T.S. Kaya (실습선 가야호 충돌회피 동작에 관한 연구)

  • KIM, Min-Seok
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.21 no.1
    • /
    • pp.52-58
    • /
    • 2009
  • With the increase of marine traffic capacity, marine accidents have also been increased for recent several years. Especially watch officer must maneuver not entering into the safety minimum approaching distances when two power-driven vessels are crossing. The author calculated the safety minimum approaching distances to provide a navigator with them based on zig-zag motion by experimental ship. The obtained results are summarized as follows : 1. The greatest distance is to be kept by the give way vessel to avoid collision when the crossing course angle is $90^{\circ}$. In this case the safety minimum approaching distance must be more than from 5 times to 11 times of her own length according to her size. 2. The watch officer of the give way vessel must always take an action to avoid collisions outside of the safety minimum approaching distance. 3. When the navigator used rudder to small angle than to large angle to avoid other vessel he must take action outside the sufficient safety minimum outside distances in advance. 4. Risk of collision in crossing situation is more greater in obtuse situation than in acute one.

A Study on Comparison and Analysis of Motion Sickness Inquiry with MSI Calculation for Training Ship Kaya (실습선 가야호의 멀미도 조사와 MSI 계산의 비교 분석에 관한 연구)

  • Han, Seung-Jae;Ha, Young-Rok;Kim, In-Chul
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.4
    • /
    • pp.412-418
    • /
    • 2014
  • In this paper, for better boarding performance and pleasant boarding sensitivity of the ship, comparison and analysis was performed of motion sickness questionnaire with MSI(Motion Sickness Incidence) calculation based on ship motion theory(Strip Method) due to sea condition, incident angle in main sail way, economic speed, and calculation position of the training ship Kaya of Pukyong National University. On theses works, the rougher sea conditions became, the higher total motion sickness rate was occurred. The weights of vertical acceleration and the rates of MSI were higher at the bridge and the accommodation, which were located farther from the center of gravity of the ship. And effects of the vertical acceleration of the ship were increased in rolling then in head sea. In comparison between motion sickness questionnaire with MSI calculation, when the vertical acceleration increased, the motion sickness rate increased. The location to increase vertical acceleration and the location to cause motion sickness were agreed.

Variation of the Turning Circle by the Rudder Angle and the Ship's Speed-Mainly on the Training Ship KAYA- (타각과 선속에 따른 선회권의 변화-실습선 가야호-)

  • Kim, Min-Seok;Shin, Hyeon-Ok;Kng, Kyoung-Mi;Kim, Min-Seon
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.41 no.2
    • /
    • pp.156-164
    • /
    • 2005
  • The size of the ship's turning circle is influenced by various factors, such as block coefficient, underwater side shape, rudder area ratio, draft, trim and Froude's number. Most of them are already fixed on departure from a port. However, the ship's speed and the rudder angle are controllable factors which operations are able to change optionally during sailing. The DGPS measured the turning circles according to the ship's speed and the rudder angle. The maximum advances by slow and full ahead were 302m and 311m, and the maximum transfers were 460m and 452m, respectively. There occurs almost no difference in size of the turning circle by variation of the ship's speeds. When the rudder angles were changed to $10^{\circ}$, $20^{\circ}$ and $30^{\circ}$, the maximum advances were 447m, 271m and 202m, and then also the maximum transfers 657m, 426m and 285m, respectively. The diameter of the tuning circle was decreased exponentially when the rudder angle was increased. The maneuverability was better when the direction of turning and propulsion of propeller are in the opposite direction rather than in the same one togetherm. The distance of the maximum transfer was always bigger than that of the maximum advance.

Hydrodynamic Simulation of Midwater Trawl System Behavior (중층 트롤 어구 시스템 운동의 유체역학적 시뮬레이션)

  • 차봉진;이춘우;이주희;김현영
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.38 no.2
    • /
    • pp.164-171
    • /
    • 2002
  • In this study, a mass-spring model is used to dynamically describe and calculate the shape and movement of a mid-water trawl system. This mathematical model theorizes that the factors constituting the system are the material points and the external forces such as hydrodynamic load, gravity, and buoyancy act on these material points. In addition, it surmises that these material points are connected to each other by springs, the springs do not have any mass, and the internal force acts on these springs. The non-linear differential equations are implicitly integrated with time for guaranteeing a stable solution. The dynamic simulation by the mass-spring model shows the status of the gear such as fishing gear depth, distance between doors, shape of the gear, and tension of each line. It depends on the parameters such as towing force, warp length, force of a sinker, buoyancy of a float, type of door and netting materials. The validity of the model is verified by comparing simulation motions of a trawl system obtained from computed values to those from an actual experiment.