• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.587-593
• /
• 2020

The securing safety of ferry ships on the domestic coast is evaluated by comparing the external force applied and the securing device based on the cargo weight and hull acceleration that can exist at the loaded position. The hull acceleration based on the domestic standard, which is the basis for securing safety evaluation, is applied without reflecting the characteristics of the ship and the sailing conditions. In this study, a total of 12 acceleration measurements were performed at four points of the hull of a ship with a DWT 6,800 ton class 15.5 knots passing through Busan-Jeju to analyze the hull acceleration of the domestic coastal ferry ship. Data were collected for the buoy. For a theoretical comparative analysis of the limited measurement results, the response amplitude operator (RAO) was analyzed through frequency-response analysis by numerical simulation, and acceleration analysis for the four points was performed using the RAO results. Based on the acceleration comparison, differences in the degree of each position were observed, but in the case of the Y-axis acceleration, the analysis was 1.81 m/s², and the measurement was 1.47 m/s². The analyzed simulation result was as high as 0.34 m/s². Moreover, analysis was performed at 22 % level, and measurement at 18 % level.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.10-25
• /
• 2000

The effects of Reynolds number of model propeller leading edge roughness and air content resolved in tunnel water on cavitation inception, cavitation extent and pressure fluctuation were investigated experimentally by using two model propellers in a cavitation tunnel. Cavitation observation and propeller induced fluctuating pressure measured in the present model test were compared with the model test results of other research institutes and the full-scale data of a German container ship(Sydney Express). The comparison shows a reasonable agreement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.1013-1017
• /
• 2003

선박의 진동문제는 고출력 엔진의 채용과 고속화 및 전문화가 되면서 구조의 최적화에 따른 경향화 설계 및 각종 주요 기진원들이 다양화됨에 따라 새로운 진동문제가 많이 발생하게 되었으며 특히 최근 중소형 조선에서 건조중인 특수한 선박들의 경우 비교적 대용량의 출력을 가진 엔진과 긴 추진 축계 시스템 등으로 인하여 과도진동의 발생가능성이 커지고 있다 본 연구에서는 Supply Ship의 시운전 중에 발생한 상부구조물의 과도진동 현상의 원인을 분석하기 위해 다양한 운항 조건에서의 실선 진동 계측 및 분석을 수행하였으며 이를 바탕으로 효과적인 대책방안을 강구하기 위하여 구조의 진동특성 검토 및 진동해석을 수행하였다. 피리고 제시된 진동저감 대책이 적용된 후에 재 시운전시 진동 계측을 수행하여 대책 안의 유용성을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.18-19
• /
• 2014

NORWAY 해역에서 시추 및 생산 작업을 위한 시추선 및 생산 설비의 경우, 엄격한 기준인 NORSOK 기준을 만족해야 한다. NORSOK 기준은 선원들의 안전과 안락성을 위한 Working Environment 만족을 요구하고 있다. 특히 선원들의 거주구역에 안락성은 더욱 중요시되고 소음의 기준을 제시하고 만족을 요구한다. Cabin Unit 이 적용되는 선박의 경우 실선과 동일 조건의 Mock Up 을 제작하여 차음성능 계측 및 평가를 실시한다. 본 논문에서는 NORSOK 이 적용되는 선박의 Cabin Unit 의 Mock Up 차음성능 만족 사례를 소개하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.66-68
• /
• 2015

최적항로 지원 시스템은 실해역 속도 성능 예측방법에서의 선택 근거확보와 정확도 평가를 위한 효과 검증이 반드시 필요하다. 하지만 이 같은 성능검증에 있어서 동일한 선박에 대한 다양한 대안 항로에서의 동시성능계측이 불가능하기 때문에 효과를 직접 비교하기는 상당히 어렵다. 따라서 본 논문에서는 최적항로 지원 시스템의 효과 검증을 위한 간접적인 절차를 제안하였고, 시스템의 내부 분석코드를 이용하여 효과를 비교 검증하였다. 그 절차는 1) 계산의 근거 인기상 정보의 정확성 검증, 2) 실제 항로에서의 성능예측계산의 신뢰성 확인, 3) 신뢰성이 확보된 계산방법을 이용한 최적항로선택, 4) 실제 항로와 최적항로의 연료 효율성 비교의 4단계로 이루어진다. 대상 선박은 폴라리스쉬핑의 솔라돌핀호(208k BC)이며 실선 운항 데이터는 최적항로 지원 시스템을 통하여 직접 계측하였다. 그 결과 호주-한국 항차에서 최적항로를 항해할 경우 약 6.0%의 연료 절감 효과를 기대할 수 있음을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.135-144
• /
• 1994

The coupled vibration of the deck house and stern structure, which was experienced on a 12,900 TDW Ro/Ro ship, has been studied. It was a large-scale vibration problem where the structure resonates with the propeller excitation at the first blade passing frequency. After discussing the structural characteristics of the ship, the vibration characteristics measured ducting the sea-trial are presented and compared with the analysis results which are based on a 3 dimensional finite element(FE) model. The FE model is also used to verify various reinforcement options and to predict their effectiveness. A substantial reduction or the vibration was confirmed during the sea-trial after installing a few selected reinforcement. The forced vibration response, which is computed using the FE model, is compared with the measured data. The change of the vibration characteristics according to loading conditions is also studied.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.103-107
• /
• 1995

Longitudinal hull girder vibration has not been occurred severely since 1960's. However, recent low speed diesel driven ships equipped with overcritical shafting system, can be excited heavily in longitudinal direction by shaft axial farce coupled with torsional vibration. In this study the characteristics of longitudinal hull girder vibration of a 73,000 deadweight bulk carrier were investigated through onboard measurement, exciter test, and 3-D FEM analysis. Results showed that the longitudinal hullgirder vibration may occur in the ship which is not set up the barred speed range in engine operation. Moreover, this vibration occurs. only during the low speed voyage in harbour depending upon the ship loading condition.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2008

A ship in a sea cruises with rolling, pitching, heaving etc because of environmental causes such as wind and wave. Those motions make crews or passengers feel inconvenience and they feel acceleration changes. Therefore, if lateral and vertical accelerations can be measured at a specific position in a ship, it can be known how discomfortable crews or passengers are. The motion monitoring system developed in this paper consists of measuring and communicating part including five accelerometers and gyro and a main computer which acquires measuring data and calculates motion indices. MSI(Motion Sickness Incidence) and MII(Motion Induced Interrupt) are calculated in real time using measured acceleration and angular rate. The validity of the developed system was confirmed through the real ship test of Hannara which is the school ship of Korea Maritime University.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.56-63
• /
• 1999

The seakeeping and resistance tests of a 47.7m class catamaran are conducted in a towing tank with the 1/21.5 scale model. The effect of the trim tab on the resistance is investigated with the trim tab angle variations and the resistance and trim angle of the catamaran with the trim tab are compared with those without the trim tab. The heave and pitch motions are measured at the three full scale speeds in sea state of 3.4 and 5 and the vertical accelerations at five points on the deck are also measured. The measured accelerations are compared with the criteria of ISO 2631/3 and it is shown that the seakeeping performance of the catamaran is good.