• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.145-151
• /
• 1994

The multi-dielectric layer SiOz/Si3N4/SiO2(ONO) is used to scale down the memory device. In this paper, the change of composition in ONO layer due to the process condition and the conduction mechanism are observed. The composition of the oxide film grown through the oxidation of nitride film is analyzed using auger electron spectroscopy(AES). AES results show that oxygen concentration increases at the interface between oxide and nitride layers as the thickness -of the top oxide layer increases. Results of I-V measurement show that the insulating properties improve as the thickness of the top oxide layer increases. But when the thickness of the nitride layer decreases below 63.angs, insulating peoperties of film 28.angs. of top oxide and film 35.angs. turn over showing that insulating property of film 28.angs. of top oxide is better than that of film 35.angs. of top oxide. This phenomenon of turn over is thought as the result of generation of surface state due to oxygen flow into nitride during oxidation process. As the thickness of the top oxide and nitride increases, the electrical breakdown field increases, but when the thickness of top oxide reaches 35.angs, the same phenomenon of turn over occurs. Optimum film thickness for scaled multi-layer dielectric of memory device SONOS is estimated to be 63.angs. of nitride layer and 28.angs. of top oxide layer. In this case, maximum electrical breakdown field and leakage current are 18.5[MV/cm] and $8{\times}{10^-12}$[A], respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.169-172
• /
• 2001

다층 MEMS구조의 기초기판쌍 소재로 쓰일 수 있는 Si∥SiO₂/Si₃N₄∥Si 기판쌍의 직접접합 가능성을 확인하기 위해서 2000Å-SiO₂와 500Å-Si₃N₄층을 가진 직경 10cm의 실리콘 기판을 각각 친수성 및 소수성 표면세척을 하고 청정분위기에서 경면끼리 가접을 실시하였다. 가접된 기판쌍을 통상의 박스형 전기로를 이용하여 400, 600, 800, 1000, 1200℃ 범위에서 2시간 동안 가열하여 접합을 완료하였다. 완성된 기판쌍을 적외선분석기를 이용하여 접합면적을 확인하였고, 면도칼 삽입법으로 접합계면에너지를 측정하였다. 실험온도 범위 내에서 Si∥SiO₂/Si₃N₄∥Si 기판쌍은 1000℃ 이상에서 접합계면에너지는 2,344mJ/㎡을 나타냈으며, 이는 기존의 Si/Si의 동종접합기판쌍과 동등한 수준의 접합강도로서 부가가치가 큰 새로운 조합의 기판쌍 제조가 가능하였다.