• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.767-769
• /
• 2017

Four-shell open-typed shield case was analyzed using 3D FEM. Analysis Dimension was $2m{\times}2m{\times}2m$. Length of shield case was 0.6m and its diameter was 0.1m, 0.08., 0.06m and 0.04m. Thickness and permeablility of shield case was all 1mm and 50,000. The excited magneic fields were earth magneic fields, which were 24A/m in the holizontal direction and 36A/m in the vertical direction, respectively. During FEM analysis, shield case was located at the direction of holizontal magnetic field and was rotated $90^{\circ}$. Magnetic field was $4.45{\times}10^{-2}A/m$ at the direction of holizontal magnetic field and $6.66{\times}10^{-4}A/m$ at the $90^{\circ}$ rotated direction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.979-983
• /
• 2007

In this thesis, a strip layout drawing of LCD S/C (shield case) was prepared. In the press die, strip layout drawing is a major factor that decides the mass production of a product. The 3D CAD/CAM system was applied for the easy correction of the interference factor with other parts to be mounted. The material use ratio was enhanced to 60.17% by optimizing the blank layout and strip layout in double width array. Furthermore, the flatness of the product was made to fit the requirements by adding the bidding process intensively on the notching part where the occurrence of the change in shape is expected owing to the thin material. For the 3D CAD/CAM software, Unigraphics NX3.0 was used. The strip layout drawing was prepared in 12 processes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.48-53
• /
• 2014

The shield effect of 4 layered shield case was investigated in this paper. The material of the case was non-oriented SiFe sheet with a thickness of 0.5mm. The size of the case was 100mm wide, 100mm high and 300mm long. Relative permeability of SiFe sheet was needed to calculate shield effect. It was obtained from the measurement by a ferrite yoke and from the calculation by eddy current FEM analysis. Three configurations were used to connect both ends of SiFe sheet. First one is a connection by double-welded butt. Second one is to put the sheet the same material above the confronted both ends of the sheet to avoid a leakage magnetic flux. The last one is ideally without any connection. The shield effect of the second one agreed well with the last one and showed the shield effect of -40dB.