• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1003-1004
• /
• 2017

본 연구에서는 실내 환경에서 드론의 측위를 위한 마커 인식 및 검출 기술을 소개한다. 기존 실내 측위를 위한 기술인 Global Positioning System이나 Wi-Fi를 이용한 삼각측량 기법은 실내 환경에서 각각의 성질로 인하여 사용하기 어려운 점이 있다. 본 논문에서는 2차원 바코드와 마커 등의 객체를 드론의 카메라를 이용한 실시간 영상 전송을 통하여 검출하여 위치 정보를 획득하는 기술을 소개한다. 실험에서는 드론의 카메라를 통하여 실시간 전송된 영상에서 OpenCV V2.4.10을 통하여 객체를 검출하였고, 카메라와 객체 사이의 거리와 바코드 크기에 따른 2차원 바코드의 검출 여부를 보였으며 15*15cm의 2차원 바코드는 비교적 잘 인식하였으나 비교적 작은 11*11cm의 2차원 바코드는 거리가 멀어질 수록 인식이 힘들어지는 결과를 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.991-994
• /
• 2018

최근 사용자의 위치 정보를 기반으로 응용서비스를 제공하는 위치 기반 서비스가 각광 받고 있다. 그 중 실내 위치 정보 수집을 위한 방법 중 하나로 비콘을 사용하고 있다. 비콘을 이용하여 실내공간에서 사용자의 위치를 계산하는 방법은 비콘과 단말기와의 거리를 측정하고, 측위 알고리즘을 적용하여 단말기의 위치를 계산하는 것이다. 하지만 비콘이 단말기와의 거리를 측정하는데 사용하는 RSSI는 주변 환경에 영향을 많이 받아 측정 시 오차가 발생한다. 따라서 정확한 실내 측위를 위해서는 불안정한 RSSI를 보정할 필요가 있다. 본 논문에서는 RSSI의 오차 범위를 평균필터와 칼만필터, 그리고 신호의 정확도 개선 과정을 통해 보정하고 그 결과를 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.526-528
• /
• 2013

최근 실내 측위 기술을 이용한 다양한 서비스 제공을 위해 많은 위치 인식 기법이 연구되고 있다. 기존의 실내 위치 인식 기법은 사전에 획득한 맵 정보나 미리 구축한 기반 시설이 필요하거나, 추가 장비를 착용 및 부착해야 하는 단점이 있었다. 이에 본 논문에서는 스마트폰 내부센서를 이용하여 실내에서 사용자의 위치를 측정하는 시스템을 제안하였다. 제안한 시스템은 가속도 센서를 이용하여 이동여부를 파악하고, 사용자의 평균적인 이동속도와 방향센서를 이용하여 획득한 이동방향을 이용하여 위치를 추정한다. 제안한 시스템을 안드로이드 스마트폰에 구현하여 실험한 결과 약 ${\pm}75cm$ 이내의 오차에서 위치 인식이 가능함을 확인하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.76-86
• /
• 2013

As the basic Kalman filter is limited to be used for indoor navigation, and particle filters incur serious computational overhead, especially in mobile devices, we propose an adaptive hybrid filter for WiFi-based indoor positioning systems. The hybrid filter utilizes the same prediction framework of the basic Kalman filter, and it adopts the notion of particle filters only using a small number of particles. Restricting the predicts of a moving object to a small number of particles on a way network and substituting a dynamic weighting scheme for Kalman gain are the key features of the filter. The adaptive hybrid filter showed significantly better accuracy than the basic Kalman filter did, and it showed greatly improved performance in processing time and slightly better accuracy compared with a particle filter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1643-1654
• /
• 2015

With standardization of IEEE 802.11n, APs with the 2.4GHz and 5GHz dual-band capability have widely been deployed over a metropolitan area by individuals and internet service providers. Moreover, due to the increasing attentions on indoor-localization technique using Wi-Fi, the need for LOS and NLOS determination scheme is increasing to enhance accuracy of the localization. In this paper, we propose a novel LOS/NLOS determination technique by using different radio attenuation characteristics in different frequency bands and different mediums. Based on this technique, we designed a LOS/NLOS-aware indoor localization scheme. The proposed LOS/NLOS determination algorithm can be used when the distance between an user device and an AP is unknown, and the proposed localization scheme provides very accurate room-level position information. We validated the proposed scheme by implementing it on Android smart phones.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.129-136
• /
• 2014

Wi-Fi fingerprinting system is a very popular positioning method used in indoor spaces. The system depends on Wi-Fi Received Signal Strength (RSS) from Access Points (APs). However, the Wi-Fi RSS is changeable by multipath fading effect and interference due to walls, obstacles and people. Therefore, the Wi-Fi fingerprinting system produces low position accuracy. Also, Wi-Fi signals pass through walls. For this reason, the existing system cannot distinguish users' floor. To solve these problems, this paper proposes a LED fingerprinting system for accurate indoor positioning. The proposed system uses a received optical power from LEDs and LED-Identification (LED-ID) instead of the Wi-Fi RSS. In training phase, we record LED fingerprints in database at each place. In serving phase, we adopt a K-Nearest Neighbor (K-NN) algorithm for comparing existing data and new received data of users. We show that our technique performs in terms of CDF by computer simulation results. From simulation results, the proposed system shows that a positioning accuracy is improved by 8.6 % on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.936-942
• /
• 2022

While indoor vehicle navigation is an essential component in large-scale parking garages of major cities, technical limitations and challenging propagation environments considerably degrade the accuracy of existing localization techniques. This paper proposes a proximity detection scheme using low-cost beacons where a handheld mobile device within a moving vehicle autonomously detects its approximate position and moving direction by only observing Received Signal Strength (RSS) values of beacon signals. The proposed approach essentially exploits the differential RSS technique of multi-directional beams to reduce the impact of the environment, vehicle, and mobile device. A low-cost multi-directional beacon prototype is developed using Bluetooth technology. The localization performance is evaluated using 96 beacons in an underground parking garage within an area of 394.8m×304.3m. Experimental results show that the 90th percentile of the average proximity detection error is 0.8m. Furthermore, our proposed scheme provides robust proximity detection performance with various vehicles and mobile devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1551-1558
• /
• 2021

Beacon signals used in indoor positioning system are reflected and distorted, resulting in noise signals. KF(Kalman Filter) has been widely used to remove this noise. In order to apply the KF, optimization process considering the signal type, signal strength, and environmental elements of each product is required. In this paper, we propose a solution to the optimization problem of KF Parameters using GA(Genetic Algorithm) in BLE(Bluetooth Low Energy) Beacon-based indoor positioning system. After optimizing KF Parameters by applying the proposed technique with a certain distance between Beacon and receiver, we compared the estimated distance passed through KF with the unfiltered distance. The proposed technique is expected to reduce the time required and improve accuracy of KF Parameters optimization in an indoor positioning system based on RSSI (Received Signal Strength Indication).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.167-178
• /
• 2023

Our society is rapidly changing, and there is a growing demand for various convenience services in our daily lives. Among these services, railway and subway stations require tailored wayfinding services to accommodate individuals with disabilities. Currently, signage and information desks are the primary means of navigation. However, individuals with disabilities often rely on assistance from others due to physical discomfort or cognitive impairments. In this paper, we propose a customized wayfinding system within railway stations to assist individuals with disabilities. This system aims to ensure safe and convenient mobility in complex indoor environments, including transfer facilities.

• Smart Media Journal
• /
• v.12 no.4
• /
• pp.41-46
• /
• 2023

UWB is a type of technology used for indoor positioning and is characterized by higher accuracy than RSSI-based schemes. Mobile equipment operating based on ROS can monitor the environment around the equipment using lidar and cameras. When applying the loop closing technique to determine the starting position in this monitoring process, the existing method has a problem of low accuracy because the closing operation occurs only when there are feature points on the image. In this paper, to solve this problem, we designed a system that increases the accuracy of loop closing work by providing location information by mounting a UWB tag on a mobile device. In addition, the accuracy of the UWB-based indoor positioning system was evaluated through experiments, and it was verified that it could be used for loop closing techniques.