• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.61-68
• /
• 1976

For the artificial precocious breeding of abalone effects of changes in environmental parameters, water temperature and light period, on the induction of spawning have been studied. Subtidal specimens of Haliotis discus hannai were collected irregularly for 6 times from April to June 1975 in Chungmu Bay near Jukdo Island, the southern coast of Korea. One hundred and fifty specimens were reared in 4 aquarium tanks in the laboratory and in a creel submerged in the sea during the period of 60 days from April 24 to June 23, 1975. The all groups kept in the four tanks and a creel showed very high spawning rates $(70\~100\%)$, compared to those inhabited the natural environment at sea until right before the spawning time $(0\~50\%,\;average\;16.4\%)$. From the results of the present induced spawning, the parameters can be discussed as follows: It seems likely that photoenvironment may stimulate to produce and secrete some internal substances which may concern to giving the fertilizing ability to the eggs before spawning and to inducing spawning, but the temperature may not be a factor for this concern. For effective precocious breeding, it seems to require that abalones are to be realoed under controlled conditions of darkness below 2,000 lux even during day time for more than 60 days before inducing spawning.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1031-1040
• /
• 2023

Propagation characteristics in line-of-sight(LOS) paths in 3, 6, 10, and 17 GHz frequency bands were measured and analyzed in two different indoor corridors: second floors of Buildings D2 and E2. The measurement was designed to measure when the receiving antenna moved at 0.5 m intervals from 3 m to 30 m, while the transmission antenna was fixed. The analysis of the two indoor corridors was compared by applying basic transmission loss, root mean square (RMS) delay spread, and K-factor. For basic transmission loss, the loss coefficient of the floating intercept path loss model was higher in the indoor corridor of Building E2 than in that of Building D2. Similarly, the RMS delay spread in the time domain was greater in the indoor corridor of Building E2. However, the indoor corridor of Building D2 exhibited higher K-factor in the 3, 6, and 17 GHz bands with lower wave propagation in the 10 GHz band. Despite the 2 indoor corridors being identical, the propagation characteristics varied due to different internal structures and materials. The results provide measurement data for ITU-R Recommendations regarding various indoor environments.

• Archives of design research
• /
• v.12 no.3
• /
• pp.167-176
• /
• 1999

This article analyzed the recent Korean accessibility standard supporting the people with disabilities. This is the basic study to make the interior environment more comprehensible and safer for the physically handicapped. Researcher selected the interior elements related to the mobility and accessibility for the physically handicapped. Then the '98 Korean accessibility standard code called 'Pyunui Chungjin Pup' were compared with the previous Korean building code and two other guidelines for evaluations. Result showed that 'Pyunui Chungjin Pup' addressed more obligatory items in facilities used by people with disabilities. That contributed to develope the accessible environments and to offer the independent activity in the society for the disabilities. However dimensions of 'Pyunui Chungjin Pup' showed the minimum standard. Also it did not provide the sufficient design considerations to make up the sufficient design considerations to make up the other types of disabilities including sensory limitations, or cognitive function limitations. Hereafter, the quality of accessibility guideline should be raised with further study.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.147-152
• /
• 2018

Recently, as the demand for transmission of ultra-high quality media data such as UHD, AR, and VR increases, various technologies for this have been actively developed and IEEE 802.11ad standard have been commercialized. In this paper, a test bed is constructed to analyze the indoor wireless environment using the IEEE 802.11ad standard based on mmWave, and the experimental results of various indoor wireless environments are introduced and analyzed. We compared the data from the module by data transmission, such as signal to noise ratio(SNR) and throughput. And we measured the beam pattern and width of the module and compared the effects on the indoor environment of the corridor and the office. This shows that the signal reflection of the wall shows higher SNR values and is more suitable to use for indoor than outdoor. It is confirmed that the loss when not in line of sight(LoS) is not enough to compensate the wall reflected signal. As a result, it is judged to be suitable for the indoor use of the mmWave LAN and can be usefully used for further experiments.

• Korean Institute of Interior Design Journal
• /
• v.18 no.2
• /
• pp.93-101
• /
• 2009

This study is including the independent project, "building children's library of the town" that is conducted by a local resident. The study object is the contents of the "design workshop for library planning" and the general process during one year since the opening. This study is delivering "information of children's library" through the work-shop and is conducting the role of a professional space planner by measuring the blueprint. Thus, the study could be conducted with synthetic viewpoint on each library. The followings are the results from the study. First, there were various space operations and a variety of programs in the case library that is independently managed. This is directing to "the constructive and active space usage" by the users and finally results in positive circulation. Secondly, there is a change through the process of execution and operation in the library construction plan. There are needs for the flexible space expansion and adjustment, modifiable furniture layout and design and various keeping areas because there is on-going tendency of corresponding space change. The third, the author could draw more practicable consideration points for space planning by looking at the trend of space change in Transactionist viewpoint. Thus, this study is very meaningful in terms of planning of sustainable public areas.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.59-66
• /
• 2010

Natural ventilation is major strategy of 'sustainable building'. It aims to supply fresh air to the indoor, and to remove heat from the indoor during summer. In the latter point of view, natural ventilation can be grouped into two main strategies, daytime ventilation and night cooing. If we take advantage of these two natural ventilation strategies, indoor thermal comfort can be significantly improved. This study focused on grasping the current situation and problem of indoor thermal comfort of the naturally ventilated residential buildings to seek for direction of later studies. Additionally, thermal comfort of residence where the interior blind and exterior insulation were applied was analyzed. It was analyzed that the percentage of the time which satisfy the indoor acceptable operative temperature during summer was 90 ~ 95% and the heat control performance of natural ventilation has a limitation. When the interior blind and exterior insulation were applied, indoor thermal comfort was significantly improved. However, it still need more improvement.

• Korean Institute of Interior Design Journal
• /
• v.15 no.1 s.54
• /
• pp.106-112
• /
• 2006

Buildings undergo changes by various factors according as pass at time. Due to that social requests and issues form one common sense of value and this would influence the architect's design intention. In fact, the form and function of buildings have coped with transition of the common sense of value by each times. Hospital architecture is also changed in function, scale and technology since, Kwanghyewon which was the first western style hospital in Korea was established in 1885. It is changing that the social needs for hospital which was a basic function of healing to laying emphasis on the function of precaution. According to this, the change of hospital spaces means that it can promote healing environment which is expanded from the modern concept of isolation, accommodation and urban sanitation. These changed concepts were adopted limited areas in hospitals at first however, nowadays they are expanding to other areas. So, this is caused to make the image of the hospital. From this point of view, Entry space is an example to show the changes. This study is intended to determine the overall space structure of entry area and to classify and analyze the difference.

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.53-58
• /
• 2007

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in multi-layered building materials, and predict the indoor pollutant concentration through the CFD(Computational of Fluid Dynamics) and CRIAQ2 based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient(hm') which indicates the existing convective mass transfer coefficient(hm) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.993-998
• /
• 2006

High-rise apartments have a problem using natural ventilation because of the strong outdoor wind velocity. Conventional high-rise apartments have adopted mechanical ventilation systems to maintain the indoor air quality. However, it leads to the overuse of electricity and the sick house syndrome. Double-skin facade is the alternative for the high-rise building to use natural ventilation and this study is focused on the performance of the box-window, which is a kind of double-skin facades. Indoor wind velocity and HCHO concentrations are analyzed with three types of box-windows: the diagonal type, parallel type and perpendicular type. The airflow is simulated by computational fluid dynamics program. Box-windows reduce the maximum value of indoor wind velocity about 50% compared with the single window and the HCHO concentrations do not have the big difference. Box-windows could be the alternative to enhance the use of the natural ventilation and indoor air quality of the high-rise apartment.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.484-490
• /
• 2017

In order to examine flow characteristics according to the shape of the meandering low flow channel in the compound cross section typed straight channel, we assumed the representative channel type in Korea and confirmed the validity of the 3D numerical simulation by carrying out the hydraulic model. Based on this study, numerical simulations were also conducted on other types of river channel. As a result of the numerical model test (using the velocity value measured by the water depth observation from the hydraulic model test), it was confirmed that the numerical simulation results are in good agreement with the numerical simulation results. As a result of analyzing the flow field according to the changes in the shape of the low flow channel, it was confirmed that the secondary flow examined in the previous studies occurred. Also, it was confirmed that the maximum flow velocity point moves according to the expansion cross sectional area of flow in high flow plain. Ultimately, it is thought that it is necessary to understand the position of the water impingement (which is an important factor in river design) and the extent of the impact because the change of the channel width affects the flow.