• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.214-225
• /
• 2020

Uniaxial compressive strength (UCS) of rock is one of the important factors to determine the advance speed during shield TBM tunnel excavation. UCS can be obtained through the Geotechnical Data Report (GDR), and it is difficult to measure UCS for all tunneling alignment. Therefore, the purpose of this study is to predict UCS by utilizing TBM machine driving data and machine learning technique. Several machine learning techniques were compared to predict UCS, and it was confirmed the stacking model has the most successful prediction performance. TBM machine data and UCS used in the analysis were obtained from the excavation of rock strata with slurry shield TBMs. The data were divided into 8:2 for training and test and pre-processed including feature selection, scaling, and outlier removal. After completing the hyper-parameter tuning, the stacking model was evaluated with the root-mean-square error (RMSE) and the determination coefficient (R²), and it was found to be 5.556 and 0.943, respectively. Based on the results, the sacking models are considered useful in predicting rock strength with TBM excavation data.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.59-75
• /
• 2008

This study is designed to support the development and the teaching of revised curriculum of 2007 "Technology & Home Economics" by investigating the actual condition and the necessity of education for elderly housing education. Questionnaire survey was conducted with 488 high school students in Gyeongnam in 2008. The data analyzed by descriptive statistics, t-test, One-way ANOVA, Duncan's multiple range test by using SPSS 14 program. The results showed that most of the students were dissatisfied with their middle school education of elderly housing due to the lack of interesting and practical contents. Thus, various teaching-learning methods where student can experience and experiment is needed. Also, the students demanded more of factors of elderly housing, spacing plan, elderly welfare service and less of three-generation housing and senior housing in their elderly housing education. The needs of education contents differed among students depending on variables such as sex, graduated middle school, household income, dwelling space and length of residential years. Therefore, revised 2007 curriculum of "Technology & Home Economics" should include required contents in related chapters. Because there are significant differences among textbooks about elderly housing, further attention needs to be paid to the new textbooks in order to include education contents evenly. At the same time, teachers should organize their teaching contents considering the divergence of variables. The effect of elderly housing education will be maximized if the revised curriculum consists of more experimental activities such as elderly simulation in the local community.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.133-153
• /
• 2019

This study is about the development and creation of the public installation to enhance the contact chances with plants for the city dwellers who are living in the environment of limited green space. The researcher tried to create a floral art work at an island type bus stop on the central bus only lane, where the passers-by can enjoy the contact with plants for a second on that crowded space. The researcher made the study of various related cased world-widely and existing island type bus stop on the central bus only lane. The researcher also made pre-creation study of applicable forms and elements, and developed the prototype of the installation on the base of that study. Therefore the researcher created 1 installable screen type floral art work offering abundant contact experience to the viewers which has multiple shelves in the vertical frame to fit and be substituted by the designated wall unit of the island type bus stop structure. Also the researcher developed the prototypes of 2 small interior pieces. The meaning of this study can be found in the contribution of increasing visual experiencing rate of green space and chances of experiencing plants to create positive psychological, emotional effects by developing floral art works to be installed at crowded urban public space.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.19-29
• /
• 1994

A large volume of paper mill sludge(PMS) is produced every day from paper industries after treatments of waste water and it costs too much to dispose of the sludge. Since PMS consists mostly of biodegradable organic matter, cellulose, it is desirable to recycle it by proper treatments such as composting. In this study, experiments were conducted using a small scale reactor(12l) to establish optimum conditions for efficient composting of PMS of which initial pH, C/N ratio, and moisture content were 7.1, 28~30, and 60~65%, respectively. No heavy metals such as mercury, cadmimum, and lead were not detected in the PMS. Various levels of forced aeration, 1 minute aeration per every 30, 60, 120, 240, and 480 minutes were applied and 1 minute aeration per 60 and 120 minutes found to be proper for composting of 8l PMS in this system. Relationship between $CO_2$ production and temperatures was positively correlated with r> 0.82 suggesting that the normal decomposition of PMS by microorganisms occurred. However, under the condition of aeration interval over than 240 minutes, a negative relationship between two parameters was found indicating the occurrence of abnormal(maybe anaerobic) degradation. The amount of added nitrogen also affected composting of PMS resulting in the increase of $CO_2$ production and temperature. Semi-field tests using 100kg PMS in a static pile sysem showed that PMS could be composted efficiently under optimal environmental conditions. The parameters determining efficiency of composting such as C/N ratio, aeration, moisture content, and pH need to be monitored.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.546-555
• /
• 2014

The final aim of this study is to develop a biofiltration system integrated with plant vegetation for improving indoor air quality effectively depending on indoor space and characteristics. However, to approach this final goal, several requirements such as constant pressure drops (PDs) and soil moisture contents (SMCs), which influence the capacity design for a proper ventilation rate of biofiltration system, should be satisfied. Thus, this fundamental experiment was carried out to adjust a proper wind speed and to ensure a stabilization of initial SMCs within biofilter for uniform distribution of SMCs and PDs, and for normal plant growth, especially avoiding root stress by wind. Therefore, we designed horizontal biofliter models and manufactured them, and then calculated the ventilation rate, air residence time, and air-liquid ration based on the biofilter depending on three levels of wind speed (1, 2, and $3cm{\cdot}s^{-1}$). The relative humidity (RH) and PD of the humidified air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of lettuce and duffy fern grown within biofilter were measured depending on the three levels of wind speed. As a result of wind speed test, $3{\cdot}sec^{-1}$ was suitable to keep up a proper RH, SMC, and plant growth. Thus, the next experiment was set up to be two levels of initial SMCs (low and high initial SMC, 18.5 and 28.7%) within each biofilter operated and a non-biofiltered control (initial SMC, 29.7%) on the same wind speed ($3cm{\cdot}sec^{-1}$), and measured on the RH and PD of the air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of Humata tyermani grown within biofilter. This result was similar to the first results on RHs, SMCs, and PDs keeping up with constant levels, and three SMCs did not show any significant difference on plant growth parameters. However, two biofiltered SMCs enhanced dry weights of the plants slightly than non-biofiltered SMC. Thus, the stability of this biofiler system keeping up major physical factors (SMC and PD) deserved to be adopted for designing an advanced integrated biofilter model in the near future.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.315-326
• /
• 2015

This study has started from a curiosity about how the concept and characteristics of mise en abyme, which is one of meta-discourse in the contemporary aesthetics and has affected every aspect of modern philosophy, art, and culture, are expressed in modern architecture. 'Mise en abyme' is a technique mainly used by writers of the nouveau roman after it was introduced first in the work of novelist Andre Gide; this technique of artistic expression has been extended across the whole contemporary art and has become the meta-discourse which essentially makes its appearance in the art after postmodernism. 'Mise en abyme', meaning endless formation of image between two mirrors, got involved with discourse of the various philosophers of the time such as Deleuze and Derrida, and was also expressed in the language of architecture by modern architects who have been influenced by their philosophy. In this context, the technique of mise en abyme which is mostly used in art has a relation to methods of space expression of architects. This research studied the characteristics of mise en abyme which show in the expressional method of the modern architecture based on the relationship between the technique of mise en abyme and the modern method of architectural expression. Moreover, on the basis of this an analysis was carried out on architectural works of Jean Nouvel, who uses de-materialization and singularity as the architectural language. Through the research it was confirmed that the characteristics of expression of mise en abyme in architecture are embodied in material of the surface which forms buildings' exterior, or expressed by using reflection and graphical factors. Through analysis this study allows the chance to see that even though the means and field for expressing mise en abyme are different, the characteristics of the fundamental concept are shared among them, and to think about the meaning in the technique of mise en abyme as one yardstick to understand modern architecture in modern times with no specific mainstream.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.