• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.147-147
• /
• 2001

목적： RF 자기장이 존재하는 공간이 좁을수록 신호 대 잡음비가 증가한다. 이것을 이용하여, 기존의 표면 코일보다 RF 자기장의 공간을 좁혀서 코일 근방에서 신호 대 잡음비를 개선할 수 있는 표면 코일을 개발한다. 대상 및 방법： 기존의 표면 코일의 RF 자기장은 쌍극자(Dipole) 자기장 형태이다. 쌍극자 모드는 자기장의 세기가 1/r$^3$로 감소한다 하지만 자기장을 사중극자(Quadrupole) 형태도 발생시키면, 1/r$^{5}$ 로 감소하게 되어, 극자(pole)로부터 먼 곳에서는 자기장의 감소가 매우 급격히 일어난다. 극자 근방에서는 쌍극자와 사중극자 자기장의 세기 차이가 거의 없다. 이런 원리들을 이용하여 표면코일의 형태를 사중극자 자기장이 발생하도록 제작하여, 코일로부터 먼 곳의 신호는 코일에 검출되지 못하게 하였다. 그러므로 신호 대 잡음비에 큰 이득을 볼 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.85-87
• /
• 2011

WPS_WS는 무선 AP의 정보를 통해 현재 이동 객체의 위치를 찾는 시스템이다. 실외 및 실내의 AP 신호 세기 특징을 활용하여 현재 위치를 판단하며 이를 위해 AP 정보를 저장하기 위한 Radio Map구축이 선행되어야 한다. 최초 서비스를 위하여 map을 구성하더라도 실외의 경우 AP신호의 가변성에 의해 구축된 DB의 map 정보를 100% 신뢰할 수 없다. 따라서 신호세기의 변동을 감지하여 능동적으로 map 정보를 변경해 줄 필요가 있다. 본 논문은 이동객체가 현재의 위치를 판단하기 위해 수집한 AP의 정보 중 오류 정보들을 저장하여 분석하고 이를 토대로 구축된 MAP을 실시간으로 변경 및 수정하여 AP의 신호 변경에 능동적으로 대처할 수 있는 Radio Map 최적화 모듈에 대하여 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.655-657
• /
• 2004

채널 레벨 컨트롤러는 DWDM(Dense Wavelength Division Multiplexing) 방식의 OXC(Optical Cross Connect), OADM(Optical Add/Drop Multiplexer), 광 증폭기(EDFA : Erbium Doped Fiber Amplifier) 둥의 시스템에서 채널별 광신호의 세기를 조절하여 시스템의 신뢰성을 높이는 중요한 제어기다. 본 논문에서는 12채널 VOA(Variable Optical Attenuator) 4개를 사용하여 40채널의 광 신호 레벨을 제어할 수 있는 컨트롤러를 구현하였다. 각 채널의 광 신호 레벨을 제어하는데 하나의 마이크로 프로세서가 5개의 채널을 제어하고 총 8개의 마이크로프로세서로 40채널을 분산 제어하도록 구성하였다. 또한 외부와 통신을 하고 사용자로부터의 명령을 각각의 마이크로프로세서에 전달하기 위한 마이크로프로세서를 추가하였으며, 출력되는 광 신호의 세기를 측정하여 VOA를 제어하는데 있어서 VOA 출력에서 바로 PD(Photo Detector)로 입력하여 AWC(Arrayed Waveguide Grating) 출력에서 광 신호를 다시 분파하여 PD에 입력하는 번거로움을 개선하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.220-223
• /
• 2006

In this paper, we studied about the level controller of optical signal with 40 channels by 4 VOA(Variable Optical Attenuator) with 12 channels. Total 8 microprocessors control 40 chamois for control of optical signal level so that a microprocessor controls 5 channels each. Moreover a microprocessor was added to communicate with outside and transfer instruction to each microprocessor. The output optical signal is measured and VOA is controlled as a result of it. The VOA outputs is inputted into PD(Photo Detector) at once. We could control multi-channel optical signals simply like this.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.4
• /
• pp.1-7
• /
• 2012

This paper proposes a new indoor location recognition system using a ZigBee network and a global positioning system(GPS). The proposed location recognition system applies GPS values that are mainly used for outdoor location recognition, to indoor location recognition; hence the techniques conventionally separated for the indoor and outdoor location recognition are integrated into one location recognition technique. The proposed system recognizes a location using the distance between nodes. Although the distance between nodes can be calculated by measuring the strength of the received ZigBee signals, generally the measured distance is not accurate and has high error rates since the strength of the ZigBee signals is different depending on the distance. In order to reduce the error rate, we have subdivided the output power of the received ZigBee signals into five levels. When a moving node generates a signal, each fixed node transmits the received signal strength and its own GPS information to other nodes, so the moving node can find its own accurate location in terms of the received signals.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.51-59
• /
• 2008

In wireless sensor networks, one of most common location detection methods that do not require additional devices such as GPS and ultrasonic sensor, is the location detection method based on received signal strength. However, measured received signal strength will fluctuate over time mainly due to physical radio channel characteristics between nodes, which subsequently will cause errors to measured distance between nodes. Since these contaminated distance data are utilized to detect the location of unknown node, there will be accumulated errors in the location of unknown node. In order to overcome the limitation of the location detection method based on received signal strength, we propose a location scheme in which reliability information of distance data as well as distance data between nodes are utilized to estimate the location of unknown node. Through simulation, it is shown that the proposed scheme can accomplish 30% capacity improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.850-857
• /
• 2012

A moving network is the usage model that provides the mobile stations to the communication service via the mobile relay deployed in the high-speed vehicle. The mobile relay periodically performs the signal strength measurement of the neighbor base stations to select the target base station during the handover procedure. The mobile stations experience the service disruption during the measurement of the mobile relay. In this paper, we propose the estimation based scanning method to overcome the service disruption of the mobile stations connected via the mobile relay. In the proposed method, mobile stations subordinated in the mobile relay periodically measure the signal strength of neighbor base stations in order to perform handover. The measured signal strength is used to estimate the signal strength between the mobile relay and the neighbor base station. We performed simulations in order to evaluate the performance of the proposed method in terms of the estimation accuracy and the overhead due to the exchange of channel information. By the simulation result, The estimation error is less than 4dBm when more than 6 mobile stations are used for the estimation. The overhead caused by the proposed method is less than that caused by the direct measurement of the mobile relay when the data rate is more than 8Mbps.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.55-63
• /
• 2013

In cognitive radio networks, acquirement of position information of primary user is very important to secondary network since localization information of primary users can be utilized for improving the spectrum efficiency of secondary network and for avoiding harmful interference to primary users by using proper power control. Among various location methods, Received Signal Strength (RSS)-based localization has been widely used for distance measurements in the location detection process despite its inherent inaccuracy because it can be easily implemented without any additional hardware cost. In the RSS-based localization, the distance is measured by the received signal strength, and distance error can be caused by many factors such as fading, shadowing and obstacle between two nodes. In the paper, therefore we propose a localization scheme based on estimation of path-loss exponent to localize the location of primary users more accurately. Through simulations, it is shown that the proposed scheme can provide less localization error and interference rate to primary users than other schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.6
• /
• pp.531-539
• /
• 2013

Fingerprinting technique uses the radio signal strength measured reference locations is typically used, although there are many Wi-Fi based location tracking techniques. However, it needs numerous reference locations for precision and accuracy. This paper the analyzes problems of previous techniques and proposes a fingerprinting system using reliability based on a signal strength map. The system collects the signal strength data from a number of reference locations designated by the developer. And then it generates path-loss models to one of the access points for each reference location. These models calculate the predicted signal strength and reliability for a lattice. To evaluate proposed method and system performance, We perform experiments in a $20m{\times}22m$ real indoor environment installed access points. According to the result, the proposed system reduced distance error than RADAR. Comparing the existing system, it reduced about 1.74m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2008

This paper presents the reflection and transmission measurements conducted at the 60GHz suitable to provide a high speed wide band service. Mean received power and standard deviation are calculated and used to compare the characteristics of radio wave propagation to the various obstacles between transmitting and receiving antennas at the frequency. The results show that the transmitted signal strength by the steel door and copper plate are about 40dB lower than in free space, those by the rubber plate, glass and styroform are about 3dB lower than in free space. Also, the re(looted signal strengths at the 60 degree grazing angle show that in case by the partition is about 23dB lower, by the surface of a wall is about 6dB lower than by the copper plate. The presented results can be used for the design of 60 GHz picocell communication network that the reflected and transmitted waves affect to the service area.