• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2005.11a
• /
• pp.246-249
• /
• 2005

음향 시스템에 있어서 하울링 현상은 음성 레벨을 제한함으로써 음성의 명료도를 저하시키는 주된 요인이다. 그리고 이를 해결하기 위한 방법으로 하울링 주파수 대역의 게인을 낮추어 음향신호의 피드백을 최소화 하는 것이 일반적이기 때문에 하울링 주파수를 찾아내는 것이 하울링 제어에 있어서 가장 핵심적인 요소가 된다. 그래서 본 논문에서는 하울링 주파수를 자동으로 검출할 수 있는 기법을 제시하였다. 이는 외부로부터 입력된 오디오신호가 하울링 신호 특성을 만족하는 정도를 ‘하울링 지수’라는 파라메터로 정의한 후 이를 기준으로 하울링 발생여부를 판단하고 하울링으로 판별된 신호의 최대 진폭을 갖는 주파수를 하울링 주파수로 출력하는 기법이다. 본 하울링 신호 자동 검출기법의 내용을 검증하기 위하여 하울링 자동 검출 프로그램을 제작하여 실험을 수행한 결과 전체 하울링 신호의 95% 이상을 검출할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.353-359
• /
• 2011

This paper proposes a vocal enhancement technique for improving the performance of vocal pitch detection in polyphonic music signal. The proposed vocal enhancement technique predicts an accompaniment signal from the input signal and generates an accompaniment replica signal according to the vocal power. Then, it removes the accompaniment replica signal from the input signal, resulting in a vocal-enhanced signal. The performance of the proposed method was measured by applying the same vocal pitch extraction method to the original and the vocal-enhanced signal, and the vocal pitch detection accuracy was increased by 7.1 % point in average.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.436-440
• /
• 2009

UHF RFID 시스템에서는 출력제한의 엄격히 규제됨에 따라 리더의 출력신호에 의존하는 패시브 태그의 후방산란(Backscattering)되는 신호는 매우 낮은 전력을 가진 미약한 신호가 되어 왜곡과 잡음의 영향을 크게 받는다. 이러한 문제는 신호검출을 어렵게 만들고 이를 개선하기 위하여 리더의 시스템은 복잡해지고 있다. 또한 현장에서 신호 검출을 위하여 근접거리에 리더를 설치하거나 협소한 공간에 다수의 리더를 설치하여 신호 검출을 하고 있다. 이러한 설치 방법은 사고의 위험이나 리더 간의 간섭에 따른 신호 검출을 더욱 어렵게 하고 있다. 본 논문에서는 태그의 패키징과 리더 안테나의 개선을 통한 태그의 인식거리 개선을 통해 신호검출의 신뢰성을 확보하는 방안에 대해서 제안하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2C
• /
• pp.229-237
• /
• 2010

The conventional detection methods developed for spatially-multiplexed MIMO systems such as OSIC and QRD-M show performance difference for each user depending on the order of detection when they are applied to detection of multi-user signals in uplink multiuser systems based on collaborative spatial multiplexing. In this paper, a signal detection method for uplink multiuser systems based on collaborative spatial multiplexing is proposed to provide similar performance for each user while its performance is close to the case of ML detection. Compared with QRD-M method, computational complexity of the proposed signal detection method is similar in the case of QPSK, and significantly lower in the case of high modulation order with 16-QAM and 64-QAM.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.28-32
• /
• 2014

In this paper, we analyzed performance of signal detection for terrestrial digital multimedia broadcasting (T-DMB) system in various channel environments that applied gaussian, Rayleigh and COST 207 environments that estimate response of real channel state. In order to detect the signal, a signal detection scheme based on energy detection is employed. We generated T-DMB signals so that estimate properly simulation result. For evaluating the signal detection performance, detection probability is derived. We consider two kinds of detection segment, which are three segments and five segments. And we compare the system performances in accordance with the detection segment. From simulation results, it is confirmed that the performance of signal detection is raised as increase the number of segments. The result of this paper can be applied to implement signal detection of broadcasting system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.639-648
• /
• 2017

Electronic warfare systems for extracting information of the threat signals can be employed under the circumstance where the power of the received signal is weak. To precisely and rapidly detect the threat signals, it is required to use methods exploiting whole energy of the received signals instead of conventional methods using a single received signal input. To utilize the whole energy, numerous sizes of windows need to be implemented in a detector for dealing with all possible unknown length of the received signal because it is assumed that there is no preliminary information of the uncooperative signals. However, this grid search method requires too large computational complexity to be practically implemented. In order to resolve this complexity problem, an approach that reduces the number of windows by selecting the smaller number of representative windows can be considered. However, each representative window in this approach needs to cover a certain amount of interval divided from the considering range. Consequently, the discordance between the length of the received signal and the window sizes results in degradation of the detection performance. Therefore, we propose the weighted energy detector which results in improved detection performance comparing with the conventional energy detector under circumstance where the window size is smaller than the length of the received signal. In addition, it is shown that the proposed method exhibits the same performance under other circumstances.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.7-13
• /
• 2014

In this paper, an effect on a GPS receiver by spoofing signal is analyzed and a GPS spoofing signal detection algorithm for GPS L1 C/A spoofing signal is proposed. A proposed detection algorithm monitors the correlation function distortion by the spoofing signal. If detected distortion is over a detection threshold, we can determine that the spoofing signal is received. The detection threshold is calculated from the statistical characteristics of a thermal noise. For verifying the suggested algorithm, a MATLAB-based simulation platform is implemented. This platform has functionalities to track GPS signal and measure the correlation values. By using this platform, the correlation function distortion by spoofing signal is observed. Also a performance of the algorithm proposed in this paper is applied and confirm the detection of a spoofing signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.142-146
• /
• 2002

직접 대역 확산 통신 방식에서 처리 이득에 비해 강한 협대역 간섭 신호가 존재 할 때 성능 향상을 위하여 다중 사용자 탐지 기술(MUD)을 사용하여 간섭 신호 제고를 위한 신호 검출을 하였으며, 적응 접속 채널 배열 응답과 다중 사용자 검출을 하기 위하여 BISP 알고리즘을 제안하였다. 또한 CDMA 채널에서 MAI와 ISI 검출에 BISP 알고리즘 신호 흐름 형태를 파악하여, 신호대 간섭 비율(SIR)과 신호대 잡음비율(SNR)에서 시간에 따른 비트율를 평가 하였다. 제안한 BISP 알고리즘은 방사 특성에 시간 지연 효율이 절반 이상 차이가 나지만 채널 특성 따라서 입력 신호를 조정 할 수 있다. 그리고 매치 필터를 통과하면서 각 채널간의 간섭을 억제하고, 사용자 검출을 용이하게 처리할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.5-12
• /
• 1996

We propose a two-channel(Speech & EGG) pitch detection algorithm. The EGG signal monitors the vibratory motion of vocal folds very well. Therefore, using the EGG signal as well as speech signal, we obtain a reliable and robust pitch detection algorithm that minimizers problems occuring in the pitch detection with speech only. The proposed algorithm gives precise pitch markers that are synchronized to the speech in the time domain. Experimental results demonstrate the superiority of the two-channel pitch detection algorithm over the conventional method, and it can be used in obtaining reference pitch for evaluation of other pitch detection algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.419-424
• /
• 2011

The system-on-board detectable and controllable the electrical fires due to ground fault(GF), arc fault and overload is implemented. The system IC for controlling and preventing the electrical fires is available to this system. The GF detection circuit for detecting the electrical leakage current, the arc fault detection circuit and the overload detection circuit controllable the input voltage for flowing the overload current are designed. The GF detection circuit and the arc fault detection circuit are good operated to the electrical leakage current and the arc signal, respectively. It is confirmed that the overload detection circuit has shown no erratic operation with the noise or the load variation and is only operated at the overload condition.