• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.139-146
• /
• 2006

Each on-board equipment providing navigational and engine information has different signals. These signals should be analyzed, be transformed to the standard digital form and be transmitted to each client on board through the earlier developed ILU (integrated LAN unit). Therefore this paper is to analyze the signals of each equipment for navigation and engine and the serial technology necessary for the equipment and IDU (information display unit), and then develop an SIU(ship's interface unit).

• Journal of the KSME
• /
• v.33 no.12
• /
• pp.1076-1085
• /
• 1993

레이저광이 가지는 지향성, 단색성, 공간적 집속성 등의 성질을 이용하는 각종 측정장치는 광섬 유의 발달과 새로운 신호처리계의 개발로 그 적용 범위가 점점 확대되고 있다. 레이저 도플러 신호의 위상차를 이용하여 운동상태의 입자의 크기와 속도를 동시에 측정할 수 있는 측정장치가 80년대에 실용화되어 캐비테이션, 분무노즐, 기름버너, 엔진연소 등 많은 분야에서 다양하게 사 용되고 있다. 이 측정방법은 Durst와 Zare에 의해 도플러 신호의 위상과 입자의 크기는 선형적인 함수 관계가 있음이 밝혀진 이래, Bachalo, Buchhave, Knuhfsen과 Olldag 등에 의해 급속히 발 전되었다. 현재 국내에도 덴마크의 단텍사, 미국의 에어로메트릭스사 등에서 개발한 장비가 3-4 기관에서 사용되고 있다. 이 글에서는 위상도플러법에 의한 입자의 크기측정에 관한 기초 이론을 참고문헌을 인용하여 설명하고, 단텍사에서 개발한 위상도플러 측정장치인 입자운동 해석장치 (PDA)를 사용하여 본 연구실에서 실험한 버너용 압력분사식 노즐에서 분사된 액적들의 국소부분 거동에 대해 소개하기로 한다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.225.2-225.2
• /
• 2005

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.81-88
• /
• 2014

Recently, a new imaging method, gamma vertex imaging (GVI), was proposed for the verification of in-vivo proton dose distribution. In GVI, the vertices of prompt gammas generated by proton induced nuclear interaction were determined by tracking the Compton-recoiled electrons. The GVI system is composed of a beryllium electron converter for converting gamma to electron, two double-sided silicon strip detectors (DSSDs) for the electron tracking, and a scintillation detector for the energy determination of the electron. In the present study, the modules of a charge sensitive preamplifier (CSP) and a shaping amplifier for the analog signal processing of DSSD were developed and the performances were evaluated by comparing the energy resolutions with those of the commercial products. Based on the results, it was confirmed that the energy resolution of the developed CSP module was a little lower than that of the CR-113 (Cremat, Inc., MA), and the resolution of the shaping amplifier was similar to that of the CR-200 (Cremat, Inc., MA). The value of $V_{rms}$ representing the magnitude of noise of the developed system was estimated as 6.48 keV and it was confirmed that the trajectory of the electron can be measured by the developed system considering the minimum energy deposition ( > ~51 keV) of Compton-recoiled electron in 145-${\mu}m$-thick DSSD.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.281-281
• /
• 2004

본 논문에서는 레이들(ladle)에 실린 용강의 균일한 혼합을 위해 사용되는 저취 시스템의 버블 강도를 예측하기 위해 진동센서를 이용한 안착대를 설계하고 제작하였다 또한 무선 인터넷을 이용해 안착대로부터 진동 데이터를 수신하여 실시간으로 원격지에 위치한 서버에 저장하는 시스템을 구현하였다. 이와 함께 저취 시스템에 사용되는 유량제어밸브를 컨트롤하기 위해 기존에 사용되는 프로토콜 변환기를 변경한 데이터 처리장치를 설계하고 제작하였다. 데이터처리장치는 4개의 직렬 신호를 동시에 처리 가능하며 비구조화된 데이터를 보관하다록 하기 위해 플래쉬 메모리를 장착하였으며, CPU의 데이터 처리를 위해 SRAM을 장착하도록 구성하였다.(중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1673-1675
• /
• 2013

인간 활동의 전 영역을 총괄하는 대뇌정보기능을 대표하는 뇌파는 대뇌피질에서 발현된다고 알려져 있다. 의학적인 연구 결과에 의하면 인지 사고 등의 역동적인 지식 활동, 다양한 감성 행동, 및 고차원적인 정신활동까지도 뇌파 분석을 통해서 어느 정도는 기계적인 인식이 가능한 것으로 알려져 있다. 뇌-컴퓨터 인터페이스는 인간 중심의 시스템을 위한 핵심 연구로서 뇌파 신호 분석에 의한 사용자 의도 인식 시스의 개발을 목표로 한다. 이에 따라서, 범용적으로 적용 가능한 뇌파신호 분석 기법 및 자동 처리 시스템에 관한 연구가 활발히 진행 중이다. 특히, 뇌는 부위별로 그 기능이 세분화 되어 있으며 의식 상태와 정신활동에 따라 뇌파가 수시로 변하면서 특정한 패턴을 갖는다. 이러한 뇌의 정보처리 메커니즘을 밝혀내면 전자장치와의 통신 인터페이스를 통해 기기를 제어할 수 있다. 본 논문은 사용자의 의도를 분석하는 방법과 이를 통해 다른 장치의 인터페이스를 제어할 수 있는 시스템을 설계했다.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.463-470
• /
• 2007

Each on-board equipment providing navigational and engine information has different signals. These signals should be analyze, be transformed to the standard digital form and be transmitted to each client on board through the earlier developed ILU (integrated LAN unit). Therefore this paper was to analyze the signals of each equipment for navigation and engine and was to use the serial technology necessary for the equipment and IDU (information display unit). And this paper was then to develop an SIU (ship's interface unit) and to test it onboard.

• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.452-456
• /
• 2000

A measurement unit and signal processing algorithm have been developed for predicting arterial oxygen saturation noninvasively. The measurement set-up was composed of a probe including light source and photodetector, optical signal processing section, LED driving circuit, PC interface software for data acquisition and data processing software. Light from the LED's was irradiated onto the finger nail bed and transmitted light was measured at different wavelengths. An effective baseline correction method was developed and measured data were analyzed by using various data processing methods and prediction algOlithms. For performance evaluation, a pulse oximeter simulator (Bio- Tek Instrument Inc.) was used as reference. The best performance in terms of the correlation coefficient and the standard deviation was obtained under the following conditions; when the arterial signals were computed in terms of area rather than peak-valley difference, and when the algorithm calculating by $In(I_p/I_v)/I_{avr}$ value for pulsation waveform was used. In in vivo test, prediction was improved when the developed baseline correction method was used. In addition, wavelengths of 660 nm and 940 nm provided better linearity and precision than wavelengths of 660 nm and 805 nm. 05 nm.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2512-2520
• /
• 1997

ITU-T Q.2931 and ATM Forum UNI 3.1 lead the standardization of signaling functions for the call/connection control at B-ISDN UNI. The one is applicable to the system in the public network, which provides the point-to-point call/connection control. The other is applicable to configure ATM private network mainly related with various terminal equipments. Domestic B-ISDN developers have developed ATM switches and B-NTs as network equipment, and B-TA as a terminal equipment. But many kinds of terminal-equipments are needed to provide various services in B-ISDN. If the public network can accommodate the terminal-equipments of UNI 3.1, it's very effective to accommodate manu kinds of terminal-equipments. Therefore, this paper identifies the problems that can be occurred on the signaling procedure, when B-ISDN the public network is connected to the UNI 3.1 terminal-equipment, and provides good alternatives that can handle this kind of call/connection well.

• Journal of Biomedical Engineering Research
• /
• v.7 no.2
• /
• pp.139-146
• /
• 1986

Pulsed ultrasonic Doppler system is a useful diagnostic instrument to measure blood-flow-velocity, velocity profile, and volume-blood-flow. This system is more powerful compare with 2-dimensional B-scan tissue image. A system has been deve- loped and ii being evaluated using TMS 32010 DSP. We use this DSP for the purpose of real-time spectrum analyzer to obtain spectrogram in singlegate pulsed Doppler system and for the serial comb filter to cancel clutter and zero crossing counter to estimate Doppler mean frequency in multigate pulsed Doppler system. The Doppler shift of the backscattered signals is sensed in a phase detector. This Doppler signal corresponds to the mean velocity over a some region in space defined by the ultrasonic beam dimensions, transmitted pulse duration, and transducer ban(iwidth. Multi- gate pulsed Doppler system enable the transcutaneous and simultaneous assessment of the velocities in a number of adjacent sample volumes as a continuous function of time. A multigate pulsed Doppler system processing the information originating from presented.