• Title/Summary/Keyword: 신호중첩

Search Result 244, Processing Time 0.024 seconds

A Scheme for Extracting the Area of Common Overlap of Sensor Signals to Relocate Actor in WSAN (WSAN에서 액터 재배치를 위한 센서신호 공통 중첩영역 추출 기법)

  • Kim, Young-Kyun;Jeon, Chang-Ho
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2013.07a
    • /
    • pp.55-56
    • /
    • 2013
  • 본 논문에서는 센서 클러스터에서 액터를 재배치하기 위하여 센서신호 공통 중첩영역을 추출하는 기법을 분석한다. 기존의 액터 재배치 알고리즘은 CH (Cluster Head)와 동일하게 센서들과 연결을 설정하고자 하는 액터를 CH가 있는 위치로 이동시킨다. 이러한 액터의 이동방법은 액터와 CH를 단순하게 결합하여 액터를 재배치하는 것이며, 액터와 CH가 서로 중첩되거나 충돌하는 문제점을 가지고 있다. 본 논문에서는 센서 클러스터에서 CH와 중첩 또는 충돌 없이 액터를 재배치하기 위해 센서신호 공통 중첩영역을 추출하는 기법을 제시한다.

  • PDF

Duplicated ECG signal decomposition method using average ECG signals (평균 ECG 파형을 이용한 중첩 ECG 파형의 분리)

  • Kim, Do-Yeon;Kang, Hyun-Soo
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2014.11a
    • /
    • pp.31-32
    • /
    • 2014
  • 본 논문은 두 사람의 중첩된 심전도 신호를 평균 심전도 파형을 이용하여 분리하는 방법을 제안한다. 사전에 등록한 두 사람의 평균 심전도 파형을 이용하여 중첩된 심전도 신호에서 각 개인의 R-peak 위치를 구별해내고 이를 바탕으로 각 두 사람의 심전도 신호를 분리한다. 분리된 심전도 신호를 바탕으로 두 사람의 신호를 분석함으로써 각자의 건강상태 확인이나 상호간의 호감도 측정 등의 오락적인 분야에 활용할 수 있다.

  • PDF

Detection of Fine Delamination in Glass Fiber Reinforced Polymer Analyzing Full Width Half Maximum of Superimposed Terahertz Signal (테라헤르츠 중첩 신호의 FWHM 분석을 통한 유리섬유 복합재료 내부 미세 박리 검출 기술)

  • Kim, Heon-Su;Park, Dong-Woon;Kim, Sang-Il;Kim, Hak-Sung
    • Composites Research
    • /
    • v.34 no.3
    • /
    • pp.143-147
    • /
    • 2021
  • Full width half maximum (FWHM) analysis of superimposed terahertz (THz) signals in the glass fiber reinforced polymer (GFRP) was studied to detect fine delamination inside GFRP. The THz signals were measured for each fine delamination size inside the GFRP using the reflection mode of the terahertz time domain spectroscopy (THz-TDS) system. Then, the FWHM of the superimposed THz signal reflected at the fine delamination was extracted. Thereafter, the complex refractive index of the GFRP was measured using transmission mode of the THzTDS system. Based on this, the FWHM of the superimposed THz signal at the fine delamination were calculated and compared with respect to the fine delamination size. From the theoretically calculated superimposed signals, the relationship between the fine delamination size and the FWHM in the superimposed THz signal was derived. Consequently, the fine delamination size could be predicted through the analysis of the FWHM extracted from the THz signal at the fine delamination.

A Comparison of Superimposition Schemes for Spectral Efficiency Improvement of OFDM (OFDM 주파수 효율 증가를 위한 중첩 전송 방법 성능 비교)

  • Lee, Jun-Kyoung;Yang, Jang-Hoon;Kim, Dong-Ku
    • Journal of Advanced Navigation Technology
    • /
    • v.12 no.4
    • /
    • pp.332-340
    • /
    • 2008
  • In this paper, comparisons of the superimposition schemes for orthogonal frequency division multiplexing (OFDM) system are made. The time domain superimposition of data (TDSD) has a tradeoff between the degree of freedom for data transmission and inter-carrier interference (ICI). While SPPT and APSB experiences the increases of interference as the transmit data rate increases, TDSD can effectively improve spectral efficiency by exploiting preprocessing structures which prevents interference between the signals in the different domain. TDSD which we proposed is compared with the conventional superimposition schemes or OFDM, such as SPPT (the superimposed periodic pilot in the time domain) and APSB (the added pilot semi-blind channel estimation) by simulation. As the result, comparing the conventional OFDM, TDSD can increase the spectral efficiency up to about 20% with the superimposition factor M=16 while SPPT has the similar efficiency. APSB has the worst efficiency.

  • PDF

Implementation of Efficient Pile-up Pulse Processing Algorithm Based on Trapezoidal Filter (사다리꼴 필터를 이용한 효율적인 중첩펄스 처리 알고리즘 구현)

  • Piao, Zheyan;Chung, Jin-Gyun
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.8
    • /
    • pp.162-167
    • /
    • 2013
  • X-ray or ${\gamma}$-ray spectroscopy systems are widely used for analyzing material characteristics. Pile-up pulses are very often encountered for several reasons in XRF systems. Thus, it is necessary to reject or recover pile-up pulses to accurately analyze the material under test. In this paper, a pile up pulse rejection and recovery method is presented for XRF systems using trapezoidal pulse shaping of the input signals. Since the proposed method is based on the trapezoidal pulse shaping method widely-used in XRF systems, only two counters and a few registers are needed to implement the additional function of pile-up pulse rejection and recovery. Consequently, the proposed system is much simpler than conventional pulse reconstruction systems. It is shown that the proposed method can detect and reject pile-up pulses exactly. It is also shown that the pile-up pulses can be recovered if some conditions are satisfied.

Comparison Research of SNR and SRb with Bright Calibration and Multi Frame Images in Digital Radiography of Welded Test Components (용접 시험편의 디지털 방사선 검사에서 밝기 교정과 중첩 영상에 따른 SNR 및 SRb 비교 연구)

  • Nam, Mun-Ho;Yang, Jin-Wook;Cho, Kap-Ho
    • Journal of the Korean Society of Radiology
    • /
    • v.15 no.5
    • /
    • pp.731-739
    • /
    • 2021
  • This work compared the bright calibration of digital radiation with signal-to-noise ratio and basic spatial resolution according to multi frame to enable effective inspection of welding parts of structures at industrial sites. A total of 130 images were obtained by using a 75Se radiation source for flat weld test pieces and segmenting bright calibration and multi frame prior to shooting. The study confirms that the signal-to-noise ratio improves as the number of bright calibrations and the number of multi frame increases. The basic spatial resolution satisfied the baseline for both radiographic images. It was confirmed that the number of signal-to-noise ratio was similar by comparing images taken after installing lead shielding for scattering radiation. Although signal-to-noise ratio increases as multi frame increases, it is believed that good quality digital radiographs can be obtained if appropriate radiographic techniques are devised because exposure time of radiation affects workers' exposure and work efficiency.

A Study on the Subband Acoustic Echo Canceller Using Weighted Overlap-Add SSB and QMF Filter Banks (중첩가산방식의 SSB 필터뱅크와 QMF 필터뱅크를 이용한 서브밴드 음향 반향 신호 제거기에 관한 연구)

  • 차경환;심동연;김천덕
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.4
    • /
    • pp.93-100
    • /
    • 1999
  • 확성회의 시스템에서 응용되는 반향신호 제거기는 긴 잔향시간을 갖는 실내 공간의 환경변화에 따라 필터 계수의 갱신에 많은 시간이 요구되어 실시간 처리에 문제점으로 지적되고 있다. 본 논문에서는 연산량 저감을 통한 실시간 처리를 위하여 중첩가산방식의 SSB(Single Side Band) 필터뱅크를 사용한 서브밴드 적응 신호처리법을 제안한다. 이 방법은 입력과 출력의 스펙트럼을 몇 개의 주파수 밴드로 분할하여, 각 밴드를 ES-NLMS(Exponential Step-Normalized Least Mean Square) 알고리즘을 이용하여 적응 처리하는 것이다. 시뮬레이션 결과 중첩가산방식의 SSB 필터뱅크가 풀밴드 보다 ERLE(Echo Return Loss Enhancement)가 1∼2㏈ 정도 작을 때 연산량이 풀밴드 보다 약95%, QMF(Quadrature Mirror Filter)필터뱅크보다 약50% 정도 감소하여 우수한 것으로 나타났다.

  • PDF

An Optimal Relay Selection and Adaptive Throughput Enhancement Scheme Utilizing Superposition Modulation (협력 통신에서 중첩 변조를 활용한 최적의 중계단 선정 및 적응적 전송률 향상 기법)

  • Kang, Sung-jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.10
    • /
    • pp.1934-1936
    • /
    • 2015
  • This paper proposes an optimal relay selection and adaptive throughput enhancement scheme utilizing superposition modulation in cooperative communication. The optimal relay is selected and the channel state is estimated by utilizing superposition modulation. The source determines the number of superimposed signal in accordance with the estated channel state. As a result, throughput is increased in accordance with the channel state.

Overlap and Add Sinusoidal Synthesis Method of Speech Signal using Amplitude-weighted Phase Error Function (정현파 크기로 가중치 된 위상 오류 함수를 사용한 음성의 중첩합산 정현파 합성 방법)

  • Park, Jong-Bae;Kim, Gyu-Jin;Hyeok, Jeong-Gyu;Kim, Jong-Hark;Lee, In-Sung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.12C
    • /
    • pp.1149-1155
    • /
    • 2007
  • In this paper, we propose a new overlap and add speech synthesis method which demonstrates improved continuity performance. The proposed method uses a weighted phase error function and minimizes the wave discontinuity of the synthesis signal, rather than the phase discontinuity, to estimate the mid-point phase. Experimental results show that the proposed method improves the continuity between the synthesized signals relative to the existing method.

Phasing and Sequencing Design Techniques at a Signalized Intersection (신호교차로의 신호현시 구성기법에 관한 연구)

  • Cho, Jun-Han;Kim, Seong-Ho;Doh, Tcheol-Woong
    • Journal of Korean Society of Transportation
    • /
    • v.22 no.5
    • /
    • pp.19-33
    • /
    • 2004
  • 신호교차로 운영 최적화를 위한 4가지 변수인 주기, 현시순서, 현시녹색시간, 옵셋 중에서 지금 지 정형화된 지침이 없이 전문가의 경험이나 휴리스틱한 규칙(Heuristic rule)에 의해 결정되었던 현시순서에 대해 다양한 교통조건을 고려하여 최적현시와 지체변화를 분석하였다. 교통조건은 독립/연동교차로, 교차로 기하구조, 비혼잡/혼잡상태, 통과교통량에 대한 좌회전 교통량비(LT/Thru)에 따라 Dual ring에서 구현가능한 모든 현시순서를 대상으로 최적현시를 도출하였다. 분석과정에서 비혼잡상태의 경우 LT/Thru가 작을수록 직진 중첩 동시신호가 가장 우수하게 나왔으며, LT/Thru가 크게 증가할수록 선행양방향좌회전이 양호하게 나타났다. 혼잡상태의 경우는 LT/Thru 15%에서 공통적으로 최적현시가 변하였는데 이는 포화도와 이동류별 녹색시간비율이 크게 변하면서 급작스런 주기 증가에 기인한 것으로 판단되었다. 또한 독립교차로 및 연동교차로 현시순서 분석 결과를 보면 전반적으로 선행양방좌회전 현시와 직진 중첩 동시신호 현시가 가장 양호한 것으로 나타났으며, 양방 동시신호 현시는 대체로 지체가 높게 나타나 신호운영에 비효율적인 것을 다시 한번 입증하게 되었다. 특히 연동교차로에서는 연동에 중요한 요소인 옵셋과 진행대폭(bandwidth)의 상호관계를 탄력적으로 대응할 수 있는 직진 중첩 동시신호가 최적현시로 나타났다. 본 연구는 검지기가 설치되지 않은 고정식 신호기로 운영되는 지방부 및 도시 가로망의 교통류 효율성을 높이는 중요한 자료로 사용될 것으로 판단된다. 최근에는 실시간 교통신호 제어시스템이 활발히 연구. 운영되고 있는데 이 시스템 내에 포함되어 있는 TOD방식의 고정시간 제어(pretimed control)나 패턴선택제어(pattern selection control)에도 충분히 활용할 수 있을 것으로 사료된다.