• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.1
• /
• pp.45-52
• /
• 2017

EEG signals that are the same as those that have the same disabled people. So, the EEG signals are becoming the next generation. In this paper, we propose an internet of things system that controls the indoor environment using EEG signal. The proposed system consists EEG measurement device, EEG simulation software and indoor environment control device. We use data as EEG signal data on emotional imagination condition in a comfortable state and logical imagination condition in concentrated state. The noise of measured signal is removed by the ICA algorithm and beta waves are extracted from it. then, it goes through learning and test process using SVM. The subjects were trained to improve the EEG signal accuracy through the EEG simulation software and the average accuracy were 87.69%. The EEG signal from the EEG measurement device is transmitted to the EEG simulation software through the serial communication. then the control command is generated by classifying emotional imagination condition and logical imagination condition. The generated control command is transmitted to the indoor environment control device through the Zigbee communication. In case of the emotional imagination condition, the soft lighting and classical music are outputted. In the logical imagination condition, the learning white noise and bright lighting are outputted. The proposed system can be applied to software and device control based BCI.

• KSCI Review
• /
• v.14 no.2
• /
• pp.165-174
• /
• 2006

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a seen of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings down the cost of production by a product design that is increased user satisfaction. And it, using the patent and the new product design, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.161-170
• /
• 2007

This paper is a matter of remote control apparatus and display remote control system comprising the same. The remote controller is a wireless remote pointing device that is included a function of mouse and a function of remote controller for VOD etc. It is assembled a sending signal part to communicate with display device, a image sensor part to capture a scene of front view and a main body. Also, it includes a control part that analyzes the captured image, calculates a relative moving factor that main body is moved by user, and then controls the mouse cursor on the display device. The remote control apparatus is able to capture a seen of front view, to analyze the captured image, and to move a mouse cursor point on the display device as much as it calculated relative moving factor. Therefor it brings don the cost of production by a product desist that is increased user satisfaction. And it, using the patent and the new product desist, will make an epoch in development of the remote control system for Ubiquitous broadcasting industry.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.185-190
• /
• 2023

Recently, tracking radar requires the development of millimeter wave tracking radar to acquire target information with high resolution in various environments. The development of millimeter wave tracking radar requires the development of transmission and receiving components that can be applied to the millimeter wave tracking radar, as well as verification of the applicability of the tracking radar. In order to verify the applicability of the developed transmitting and receiving components, it is necessary to develop a signal acquisition device that can control the transmitting and receiving components using the operating concept of a tracking radar and check the status of the received signal. In this paper, we implemented a signal acquisition device that can confirm the applicability of components developed for millimeter wave tracking radar. The signal acquisition device was designed to process in real time the OOOMHz center frequency and OOMHz bandwidth signals input from 4 channels to verify the received signal. In addition, component control applying the tracking radar operation concept was designed to be controlled by communication such as RS422, RS232, and SPI and generation of control signals for the transmission and receiving time. Lastly, the implemented signal acquisition device was verified through a signal acquisition device performance test.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.239-240
• /
• 2014

본 논문에서는 싱글 보드컴퓨터(SBC)에서 마우스와 디지타이저를 이용한 입력장치설계에 대하여 연구하고자 한다. 산업용 제어현장에서 사용되는 SBC는 아날로그 방식의 입력장치를 주로 사용하지만, 현재의 컴퓨터 주변장치를 직접 사용할 수 없는 경우가 대부분이다. 본 논문에서는 PC에서 사용하는 다양한 주변장치를 SBC에서 사용할 수 있도록 신호를 변환하는 입력장치를 설계 제작하였다. PC 주변장치는 MCU를 이용하여 신호를 해석한 후, SBC 입력장치 신호형식으로 변환하여 제공하였다. 설계 제작된 입력장치는 마우스 디지타이져, 터치스크린 등 다양한 장치들을 SBC에서 사용이 가능함을 보였다.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.287-289
• /
• 2006

Smart열차진로제어시스템은 기존 전자연동장치에서 사용하고 있는 궤도회로방식의 열차점유정보대신에 열차의 실시간 위치정보를 사용하여 열차의 진로를 제어한다. 이에 smart열차진로제어시스템에 적용되는 새로운 연동논리를 검증하기 위해서 소형전동기의 속도제어를 통하여 생성되는 회전신호를 사용하여 열차의 이동 및 속도를 계산하고, 선로설정, 열차간격 제어, 진로제어, 열차모의장치 및 연동처리를 할 수 있는 모의장치를 구축하였다. 여기에서는 Smart열차진로제어시스템의 진로제어 알고리즘 설계, 장치설계 등의 제반 내용을 확인하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.177-182
• /
• 1999

시설농업의 정치식 자동화장치들을 비롯하여 노지 재배를 위한 자율주행형 로봇에 이르기까지 무인화를 위한 노력이 농업의 전반에 확대되고 있으며 원격제어와 무선통신은 이를 실현하기 위한 중요한 기술수단으로 인식되고 있다. 일반적인 무선제어 장치의 발전과정을 보면 보다 많은 제어채널에 대한 정보전송, 확실하고 오류 없는 신호의 전송을 위한 전파방해 대책, 소형 경량화라는 3가지의 기술적 실현과정으로 집약할 수 있다. (중략)

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.841-852
• /
• 2022

In this paper, a 3-phase inverter output waveform generator based on SPWM control was developed to verify the performance of the LCL filter. In order to obtain a test signal for verifying the performance of the filter, first, a DSP-based 3-phase SPWM signal generation algorithm was developed, and then a three-phase voltage source inverter circuit was designed using three half-bridge gate drivers. Next, one LCL filter was experimentally fabricated to verify the effectiveness of the developed SPWM-based 3-phase inverter output waveform generator as a test signal generator, and a DSP-based performance verification system was experimentally constructed. Finally, by comparing the three-phase voltage waveform before and after the LCL filter obtained in the output control experiment with the given time ratio, the effectiveness of the SPWM-based 3-phase inverter output waveform generator was verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1280-1283
• /
• 2007

본 연구는 홀로그래픽 정보저장기기에서 트래킹 서보 제어를 통해 원하는 데이터를 정확하게 기록 및 재생하기 위한 LQG 제어기를 제안하고 검증하는 것을 목적으로 한다. 서보광이라는 추가적인 광을 사용할 것을 제안하여, 서보광과 참조광 간의 간섭에 의해 기록매체에 서보 신호를 얻을 수 있게 하는 홀로그램을 형성한다. 기록 및 재생과정에서 신호광이 기록, 재생됨과 동시에 서보광에 의한 서보 신호가 재생되고, 그 신호의 경로에 설치된 포토 다이오드로부터 디스크 형태에서 발생 할 수 있는 외란을 감지하게 된다. 감지된 외란 신호인 트래킹 에러 신호를 통해 참조광이 디스크의 정확한 위치에 조사되게 하기 위해 평판유리 액츄에이터를 사용한다. 이와 같은 서보 제어를 수행했을 경우 데이터 페이지가 정확하게 재생되며 SNR 과 BER 이 개선되는 것을 확인할 수 있다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.95-102
• /
• 1998

본 연구의 목적은 능동질량 장치를 이용하여 지진하중을 받는 건물모델의 응답을 제어하는 것으로서 실험에 사용된 능동질량 장치는 교류형 서보 모터에 의해 관성력이 건물모델의 응답에 반작용하여 제어를 하게 되는 원리를 이용한 것이다 소형 진동대에 의한 외부하중 묘사 신호처리와 제어력 발생을 위한 장비들이 구축된 실험 모델로써 능동 질량 추진기가 1층 전단형 건물모델 상부에 설치된 해석 모델을 실현하였으며 제어력 산정을 위한 선형 2차 제어 알고리듬은 LabVIEW 프로그램을 사용해서 구현하였다. 건물의 응답과 제어력을 고려해서 제어성능을 검증하였으며 능동 질량 장치를 설치함으러써 공진하중과 지진하중에 대한 건물의 응답이 감소하고 또한 속도피드백 알고리듬이 그 외의 피드백 알고리듬 보다 제어력이 가장 적게 소용되면서 건물의 응답을 감소시키는 것을 실험적으로 파악하였다.