• Title/Summary/Keyword: 신호변환기

Search Result 984, Processing Time 0.028 seconds

Design of Vector Attenuator (벡터 감쇠기의 설계)

  • 정용채;장익수
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.35D no.11
    • /
    • pp.31-37
    • /
    • 1998
  • Magnitude/phase controlling circuit which is composed of attenuator and phase shifter make phase/gain cross-coupling, so too much tuning time is needed to find optimum operation point. In this paper, vector attenuator which control magnitude and phase of input signals is proposed. Vector attenuator in past ignores phase variation characteristics of attenuator, but vector attenuator of this paper compensates phase variation characteristics of attenuator. This vector attenuator consists of 0$^{\circ}$/180$^{\circ}$ phase shifter and low phase shifting attenuator and so forth. A 0$^{\circ}$/180$^{\circ}$ phase shifter has 0$^{\circ}$/179.9$^{\circ}$ phase shifting characteristics at a center frequency 881 MHz and a low phase shifting attenuator has an attenuation of 25dB, within the limit of 3.6$^{\circ}$ phase shift and less than -20dB reflection characteristics at both input and output ports. The designed vector attenuator shows that cartesian coordinate plane of output signal space can be represented correctly.

  • PDF

Design of a Charge-Redistribution ADC Using Bit Extension (비트 확장을 이용한 전하재분배 방식 ADC의 설계)

  • Kim, Kyu-Chull;Doh, Hyung-Wook
    • Journal of IKEEE
    • /
    • v.9 no.1 s.16
    • /
    • pp.65-71
    • /
    • 2005
  • Physical signals generated in the real world are transformed into electrical signals through sensors and fed into electronic circuits. The electrical signals input to electronic circuits are in analog form, thus they must be converted to digital signals using an ADC(Analog-Digital Converter) for digital processing. Signal processing circuits and ADCs that are to be integrated on a single chip together with silicon micro sensors should be designed to have less silicon area and less power consumption. This paper proposed a charge redistribution ADC which reduces silicon area considerably. The proposed method achieves 8 bit conversion by performing 4-bit conversion twice. It reduced the area of capacitor array, which takes most of the ADC area, by 1/16 when compared to a conventional method. Though it uses twice the number of clocks as a conventional method, it would be appropriate to be integrated with a silicon pressure sensor on a single chip since it does not demand high conversion rate.

  • PDF

A Design of Onboard PCM Encoder for Sounding Rocket (과학 로케트 탑재용 PCM 부호기 설계)

  • 이수진;이재득;조광래
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.5 no.3
    • /
    • pp.59-66
    • /
    • 1994
  • 로케트가 비행중 취득하는 각종 정보를 PCM / FM 방식으로 지상국으로 전송하기 위해서는 센서의 출력값을 원하는 범위의 값으로 맞추어주는 신호조절기, Analog 신호를 Digital Code로 변환 시켜주는 PCM 부 호기 및 PCM 부호기 출력을 변조시키는 송신기 등이 필요하다. 본 논문에서는 과학관측 로케트에 탑재할 PCM 부호기를 설계 제작하였고 실제 비행 시험을 통하여 만족할 만 한 결과를 얻었다.

  • PDF

Converting Analog to Digital Signals on the X-band Radar (X 밴드 레이더의 아날로그 - 디지털 신호 변환)

  • Kim, Park Sa;Kwon, Byung Hyuk;Kim, Min-Seong;Yoon, Hong-Joo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.13 no.3
    • /
    • pp.497-502
    • /
    • 2018
  • An analog to digital converter(: ADC) has been designed to extract video signals of marine X-band radar and convert to digital signals in order to produce rainfall information. X-band weather radars are suitable for high temporal-spatial resolution observations of rainfall over local ranges but they are very expensive and require professional management. The marine radars with 10-2 cost facilitate data collection and management as well as economic benefits. To validate the usefulness of the developed ADC, comparative observations were made with weather radar for short term precipitation cases. The rainfall distribution of marine radar observations are consistent with that of weather radar within a radius of 15 km. This demonstrates the usability of marine radar for rainfall observations.

An Implementation of Acoustic Echo Canceller Using Adaptive Filtering in Modulated Lapped Transform Domain (Modulated Lapped Transform 영역에서 적응 필터링을 이용한 음향 반향 제거기의 구현)

  • 백수진;박규식
    • The Journal of the Acoustical Society of Korea
    • /
    • v.22 no.6
    • /
    • pp.425-433
    • /
    • 2003
  • Acoustic Echo Canceller (AEC) is a signal processing system for removing unwanted echo signals in teleconference and hands-free communication. Least mean square (LMS) algorithm is one of the adaptive echo cancellation algorithms and it has been most attractive because of its simplicity and robustness. However, the convergence properties of the LMS algorithm degrade with highly correlated input signals such as speech. For this reason, transform-domain adaptive filtering algorithm was introduced to decorrelate the colored input samples by using the orthogonal transform matrix such as DCT, DFT and then LMS adaptive filtering process is applied. In this paper, we propose a MLT domain adaptive echo canceller base on the MLT (Modulated lapped Transform) orthogonal transform matrix. The proposed algorithm achieves high decorrelation efficiency and fast convergence speed via modulated lapped transform of size 2NXN instead of NXN unitary transform such as DCT, DFT, Hadamad and it is applied to the acoustical echo cancellation system. Form the computer simulation with both synthesis and real speech, the proposed MLT domain adaptive echo canceller shows approximately twice faster convergence speed and 20∼30 ㏈ ERLE improvements over the DCT frequency domain acoustic echo cancellation system.

The Design of Low Noise Downconverter for K-band Satellite Multipoint Distribution Service (K-band SMDS용 저잡음 하향변환기의 설계)

  • 정인기;이영철;김천석
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.5 no.6
    • /
    • pp.1143-1150
    • /
    • 2001
  • In this paper, we designed a downconverter for K-band satellite multipoint distribution service(SMDS). The designed downconverter consists of a low noise amplifiers, bandpass filter, stable local oscillator, drain mixer and If Amplifiers. Low noise amplifiers show 28㏈ gain and 1.5㏈ noise figure in the frequency range of 19.2㎓~20.2㎓, and a band pass filter has a -l㏈ insertion loss, and 18.25㎓ Stable local oscillator which is dielectric resonant oscillation, We obtained that the output power of the 18.25㎓ oscillation frequency is 0.5㏈m and the phase noise is the -84.67㏈c at 10KHz offset frequency. With the input RF signal the 19.2㎓~20.2㎓, conversion gain of the drain mixer shows 5㏈ at the Intermediate frequency range of 950MHz~1950MHz. We have proved that the designed downconverter satisfied the specification of a K-band satellite multipoint distribution service and it can be applied to the satellite internet receiver.

  • PDF

Design of IM components detector for the Power Amplifier by using the frequency down convertor (주파수 하향변환기를 이용한 전력증폭기의 IM 성분 검출기 설계)

  • Kim, Byung-Chul;Park, Won-Woo;Cho, Kyung-Rae;Lee, Jae-Buom;Jeon, Nam-Kyu
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2010.05a
    • /
    • pp.665-667
    • /
    • 2010
  • In this paper, the method to detect the IM(Inter Modulation) components of power amplifier is proposed by using frequency down-convertor. Output signals of power amplifier which is coupled by 20dB coupler and divided by power divider are applied to RF and LO of the frequency converter. It could be found the magnitude of IM components of power amplifier as a converted DC voltage which is come from the difference between 3th and 5th IM component. The detected DC voltage values are changed from 0.72V to 0.9V when 3rd IM component level changed from -26.4dBm to +2.15dBm and 5th IM component level changed from -34.2dBm to -12.89dBm as the Vgs of 3W power amplifier is changed.

  • PDF

의용생체공학(2)

  • Hong, Seung-Hong
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.2 no.1
    • /
    • pp.33-40
    • /
    • 1985
  • 의료의 고도화를 위해서는 각종 생체현상의 계측기술이 중요시된다. 그림1과 같은 생체현상의 계측과 감시를 위한 계통도에서와 같이 생체에서 얻어지는 정보를 바르게 계측하여 평가하기 위해서는 앞에서 기술한 생체의 물성에 관한 지식이 필요하다. 다음에 전극, 변환기등의 각종 새로운 센서의 개발이 중요하며, 그리고서 얻어지는 데이터를 증폭하여 전송하는 기술과 데이터를 처리하여 표시하거나 기록하는 방법도 중요하다. 지금까지는 측정이 불가능하다고 생각되어진 것들을 가능하게 하기 위한 새로운 센서의 개발과 정성적으로만 측정되었던 것들까지도 정량적으로 측정되는 새로운 계측시스템이 고안되어 비관혈계측의 경향으로 연구되고 있다. 이들 센서들 중에는 생체의 활동전위를 검출하는 전극과, 활동전위 이외의 일반생체현상을 변환기(transducer)를 이용하여 전기신호로 변환하여 검출하는 센서가 있다.

  • PDF

A CMOS Interface Circuit for Vibrational Energy Harvesting with MPPT Control (MPPT 제어 기능을 갖는 진동에너지 수확을 위한 CMOS 인터페이스 회로)

  • Yang, Min-Jae;Yoon, Eun-Jung;Yu, Chong-Gun
    • Journal of IKEEE
    • /
    • v.20 no.1
    • /
    • pp.45-53
    • /
    • 2016
  • This paper presents a CMOS interface circuit for vibration energy harvesting with MPPT (Maximum Power Point Tracking). In the proposed system a PMU (Power Management Unit) is employed at the output of a DC-DC boost converter to provide a regulated output with low-cost and simple architecture. In addition an MPPT controller using FOC (Fractional Open Circuit) technique is designed to harvest maximum power from vibration devices and increase efficiency of overall system. The AC signal from vibration devices is converted into a DC signal by an AC-DC converter, and then boosted through the DC-DC boost converter. The boosted signal is converted into a duty-cycled and regulated signal and delivered to loads by the PMU. A full-wave rectifier using active diodes is used as the AC-DC converter for high efficiency, and a DC-DC boost converter architecture using a schottky diode is employed for a simple control circuitry. The proposed circuit has been designed in a 0.35um CMOS process, and the designed chip occupies $915{\mu}m{\times}895{\mu}m$. Simulation results shows that the maximum power efficiency of the entire system is 83.4%.

Design and implementation of workbench for spoken language data acquisition (음성 언어 자료 확보를 위한 Workbench의 설계 및 구현)

  • 김태환
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.08a
    • /
    • pp.375-379
    • /
    • 1998
  • 음성 언어 자료의 확보 및 활용을 위해서는 다양한 소프트웨어의 도움이 필요하다. 본 논문에서는 본 연구실에서 설계 및 개발한 PC용 Workbench에 대하여 기술한다. Workbench는 음성 언어 자료의 확보를 위한 텍스트 처리 모듈들과 음성 데이터의 처리를 위한 신호처리 모듈들로 구성되어 있다. Workbench에 포함된 모듈로는 텍스트를 자동 읽기 변환하는 철자 음운 변환기, 발성 목록 선정 모듈, 끝점 검출기를 이용한 음성 데이터 편집 모듈, 끝점 검출기를 이용한 음성 데이터 편집 모듈, 다단계 레이블링 시스템, 텍스트에서 원하는 음운 환경을 포함하고 있는 문자열을 다양한 조건으로 검색할 수 있는 음운 환경 검색기를 포함하고 있다.

  • PDF