• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.904-912
• /
• 2019

We have studied the numerical analysis about the fragment ejection velocity and spray angle when the High Explosive warhead detonated at proximity distance at an aircraft. To study the physical quantities about the warhead components is very important to assessment the vulnerability of aircraft. Generally, the physical quantities about the components of a warhead such as the mass, length, diameter and charge to mass ratio are unknown. Therefore, it is required to estimate the physical quantities by using physical continuities of similar threats. The empirical formulas to understand the dependence among charge to mass ratio, length and diameter ratio were driven by using the physical parameters of similar threatening such as terrier, sparrow. As a result, we confirmed that the dead mass ratio was closed to 20% of warhead mass since the metal case of the proximity threat acts as a simple carrier. This implies that the effective length and diameter of High Explosive Compound is smaller than the length and diameter of warhead, and become a key to understand the large ejection gradient velocity and small spray angle of fragments within 6 degree.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.400-412
• /
• 2022

The Accommodational missionary method adopted by the Jesuit missionaries who came to China in the late Ming and early Qing dynasty is called the Accommodation and Naturalization and is based on the Poetry. The terms they borrowed were 'Di(Emperor Above)' and 'Tian(The heaven)', the key terms of Confucianism. Although 'Di' was a new transcendent concept, its status was downgraded in the political upheaval, and 'Tian' was rather elevated. However, both of these concepts gradually transformed into philosophical concepts that directly affect real life. The two terms borrowed to express the priesthood could not contain the uniqueness of Christianity, and Christianity was interpreted as an extension line of Confucianism thinking, reduced to an adjunct of Confucianism, and was not indigenous to the depth of ideology. A rational philosophical inquiry could not have played a full role in guiding the Chinese into the true Christian 'faith' unless it is paired with the great teachings of revelation. It is necessary to analyze these results soberly to find problems and to try various studies to explore ways to open up new horizon for Christian missionary work.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.69-78
• /
• 2008

In this study, in order to verify the reinforcement effects of the cracked concrete tubes and culverts, static load test was conducted. After the load carrying capacity of the original concrete tubes (nominal diameter 0.8 m, 1.0 m, 1.5 m) and box culverts (inner width 2.0 m. 2.5 m) was reduced by the cracking test, the cracked concrete specimens were strengthened by installing profile with steel stiffener and high strength mortar. And then, the maximum load tests were conducted the renewal concrete tubes and box culverts. According to the method application, the load carrying capacity increased 1.66~3.50 times than it of the original tubes before applying the method. In case of the original box culverts, the load carrying capacity increased 1.66~3.10 times than the case before installing profile and high strength mortar. Also non-linear analysis was carried out by using the commercial FEM program of ABAQUS 6.6. Solid (C3D8R) elements and concrete damage plasticity option was applied to the analysis. For reflecting confined reinforcing bars in the analysis, the composite material properties were used.

• Journal of the Daesoon Academy of Sciences
• /
• v.48
• /
• pp.445-479
• /
• 2024

The ideological context of the Unity of Heaven and Humankind (天人合一) is useful as an approach to understanding the meaning of 'human affairs (人事)' in Daesoon Thought. In Daesoon Thought, the meaning of 'human affairs' occurs within the context of 'the Way of humans (人道)' being based upon 'the Way of Heaven (天道).' However, in Daesoon Thought, the characteristic of 'the Way of Heaven' originates from the Supreme God of the Ninth Heaven (上帝) and His Reordering Works of Heaven and Earth (天地公事). Specifically, this entails the principle of 'what is devised by humanity (謀事在人), is achieved by Heaven (成事在天),' which is inverted to become 'what is devised by Heaven (謀事在天), is achieved by humanity (成事在人).' This is the principle of 'human affairs' that is revealed as the relationship between Humanity and Heaven is newly defined. In addition, the newly changed relationship between Humanity and Heaven is presented as the principle of 'divine beings and human beings mutually guide one another (神人依導).' This principle clearly expresses 'human affairs' in the context of Daesoon Thought. Accordingly, the two directions in which 'human affairs' are completed are expressed as two stages: spiritual enlightenment (靈通) and the Harmonious Union between Divine Beings and Human Beings (神人調化). These two directions in which 'human affairs' pursues 'the Way of Heaven' show a depth beyond just encompassing transcendence and immanence. The relationship between 'the Way of Heaven' and the Supreme God of the Ninth Heaven, in particular, is a useful point for appreciating the how the meaning of 'human affairs' in Daesoon Thought differs from other uses of the term which occur elsewhere.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.402-407
• /
• 2013

In this paper, the image processing for flexible disk grinding and the effect of the grinding conditions on the flat zone length of a workpiece are investigated, with the purpose of automating the grinding process. To accomplish this, three issues should be carefully studied. The first is finding the relationship between the flat zone length and the grinding conditions such as the cutting speed and feeding speed. The second is developing a neural network algorithm to predict the flat zone. The third is developing an image processing algorithm to measure the flat zone length of a workpiece. Slope analysis is used to determine straight and curved sections during the image processing. For verification, the estimated length and the length from the image processing are compared with the length measured by a projector. There is a minimum difference of 1.7% between the predicted and measured values. The results of this paper will be useful in compiling a database for process automation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.167-170
• /
• 2000

This study was conducted to investigate the changes of potato growth and soil properties in highland mounding-soil. Experimental plot was designed with control, chemical improvement and zeolite+chemical improvement plots. Mounding-soil was low in organic matter and phosphate contents, and that soil texture was loamy sand soil. The growth and yield of potato were highest in the zeolite treatment plot. Yield of that increased by 3.7% than control plot. Increasing ratios of potato tubers decreased at 60-70 days after planting. Increasing ratio of zeolite plot was higher or than other treatment plots. After harvesting, the contents of soil organic matter increased by 12-125%, and those of phosphate were by 29-73% respectively. The manurial value of fused and superphosphate was higher than that of potassium chloride.

• Journal of Korean Society on Water Environment
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2012

In this study, loess composites, loess with lanthanum and with aluminum, were made and evaluated for treatment of phosphorus removal in natural water system. Desiccation method for production of loess composite was superior to centrifugation method in obtaining high concentrated composites of lanthanum and aluminum. Washing of loess lanthanum composite by water did not deteriorat the lanthanum concentration in the composite, but this lowered the aluminum concentration of loess aluminum composite. Total of 15 and 37.5% of aluminum contents were removed after first washing treatment in aluminum loess of 0.05% and 0.1% respectively. However, no more aluminum loss was monitored with increase of washing times. Phosphorus removal efficiencies were not decreased with washed loess aluminum composite. Phosphorus removal was successfully achieved by adsorption of phosphate to loess composite at pH range of 5.0 ~ 8.0. Freundlich and Langmuir adsorption isotherm was observed in the adsorption of phosphate for loess composite. Dosages of 0.05% and 0.1% lanthanum composite for 95% of phosphorus removal could reduce its usage amount to 25% and 50%, respectively, comparing with dosage of loess alone. Dosages of 0.05% and 0.1% aluminum composite could reduce its usage amount to 48% and 63%, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1737_1738
• /
• 2009

미사일의 표적 충돌각을 원하는 각도로 제어하는 것은 표적의 취약점을 공략하기 위해 필수적인 기술이다. 표적 타격 지점 및 충돌각을 고려하지 않으면 타격에 성공하였다고 하더라도 표적의 방어 능력이 좋거나 신관이 충돌각에 민감하면 표적의 효과적인 파괴에 실패할 수도 있다. 이런 경우 유도 미사일의 종말 유도 효율을 증가시키기 위해 미사일이 표적을 타격하는 각도인 표적 충돌각(Impact Angle)을 제어할 수 있으면 적정 비행경로의 설정에 유리하고 우회공격 등이 가능할 뿐 아니라 미사일 탄두의 효과를 극대화할 수 있다. 하지만 이러한 장점을 갖는 표적 충돌각 유도 기법에 대한 연구는 아직 활발하게 행해지고 있지는 못하다. 기존 연구 결과들은 2차원 평면상에서의 충돌각 제어만을 다루고 있어, 요와 피치 채널의 커플링 문제가 있는 BTT 미사일에 적용하기가 어렵다는 문제점을 갖고 있다. 또한 미사일 동역학을 무시하거나 단순화하여 문제를 풀고 있기 때문에 실제 상황에 적용이 어렵다는 단점이 있다. 본 논문에서는 3차원 공간상에서의 롤 명령을 모두 포함하면서 동시에 미사일 자동조종제어기, 핀 구동기 동역학을 모두 고려한 새로운 BTT 미사일의 표적 충돌각 유도 기법을 제안한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.672-677
• /
• 2010

The goal of this study is to simplify the measurement process of the flat zone length produced by a flexible disk grinding system for the process automation. The image of workpiece in the grinding process is obtained, and the cutting speed and the feeding speed are controlled carefully to maximize the flat zone length. The gradient, the inflection point and the length of the line in the image are calculated, and the length is also measured by using a projector. Processing conditions and inversely proportional to flat zone length was changing. The flat zone length is estimated by Neural network algorithm considering the process conditions with the estimated error range as 0.06~3.61%, the Neural network algorithm for the grinding process estimation is found to be useful for building the process automation database.

• Korean Journal Plant Pathology
• /
• v.14 no.4
• /
• pp.331-338
• /
• 1998

To develop the model for prediction of potato late blight progress, the relationship between severity index of potato late blight transformed by the logit and Gompit transformation function and cumulative severity value (CSV) processing weather data during growing period in Taegwallyeong alpine area, 1975 to 1992 were examined. When logistic model and Gompertz model were compared by determining goodness of fit for progressive degree of late blight using CSV as independent variable, the coefficients of determination were higher as 0.742 in the logistic model than 0.680 in the Gompertz model. Parameters in logistic model were composed of progressive rate and initial value of logistic model. Initial value was calculated in -3.664. The progressive rate of potato late blight was 0.137 in cv. Superior, 0.136 in cv. Irish Cobbler, and 0.070 in cv. Jopung without fungicide sprays. According to in crease of the number of spray times the progressive rate was lowered, was 0.020 in cv. Superior under the conventional program of fungicide sprays, 10 times sprays during cropping season. Equation of progressive rate, b1=0.0088 ACSV-0.033 (R2=0.976), was written by examining the relationship between the parameters of progressive rate of late blight and the average CSV (ACSV) quantifing weather information. By estimating parameters of logistic function, model able to describe the late blight progress of potato, cv. Superior was formulated in Y=4/(1+39.0·exp((0.0088 ACSV-0.033)·CSV).