• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.256-261
• /
• 2020

Roadside non-point pollution reduction facilities are classified as infiltration, vegetation, reservoir, and wetland types based on their respective pollution reduction mechanisms. However, without a detailed analysis of the road and traffic conditions it is very difficult for civil engineers to determine which category of pollution reduction facility is best suited to their planning requirements. To address this issue, we propose a new decision-making method for the selection of roadside non-point pollution reduction facilities. The principal factors informing the proposed decision-making methods are the road characteristics, including location, structure, number of lanes, and traffic volume. As a result of the study, a total of new pollution reduction plans were developed, with their selection conditions and the corresponding applicable facilities established. The effectiveness of the proposed pollution reduction schemes was demonstrated for roads in Kyounggi-do, providing a valuable basis for future pollution reduction plans.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.434-434
• /
• 2023

다양한 지면 모형은 대기 강제력 데이터 세트에 의해 구동되며 육지의 물, 에너지 및 생지화학적 순환의 해석에 활용된다. 그 중 에너지 플럭스 교환을 추정하는 것은 극심한 가뭄, 폭염, 물 부족 등 극한 기후 현상에서 중요한 역할을 한다. 에너지 플럭스는 기상기후조건과 토지피복의 변화에 따른 영향을 받고 있는데 그 영향을 구체적으로 조사하는 것은 생태계 프로세스의 매커니즘을 구성하는 데 필수적이다. 본 연구에서는 최신버전인 Community Land Model 버전 5.0 (CLM5)를 이용하여 동북아시아 지역의 에너지 플럭스의 시공간분포를 분석하였다. CLM5의 시뮬레이션은 1991년부터 2010년까지 2.5° × 2.5° 그리드에서 실행되었고 주요 에너지 인자인 순복사량, 현열, 잠열을 모의하였으며, 실행결과는 FLUXNET의 동북아시아 사이트의 관측자료를 이용하여 모델을 검증 및 평가하였다. 대기 강제력 변수의 차이는 모의 결과에 영향을 미치기 때문에 수문인자와 토지피복유형에 따른 에너지 플럭스의 변동성을 분석하였고 잠열을 식생 증발산열과 지면 증발열로 파티션하여 연구지역에 따른 각 구성요소의 비율을 산정하였다. 20년간의 순복사열, 잠열과 온도의 시공간적 변동성의 연 추세를 분석한 결과 동북아시아의 대부분 지역에서 잠열과 온도는 소폭 증가되였고 순복사열은 중국 내륙과 몽골지역에서 감소되였다. 본 연구는 지표와 대기 사이의 에너지 교환에 대해 분석하였으며 이후 증발산 및 물 플럭스와의 연동성과 관계성 분석에 활용하여 기후변화를 이해하는 데 기여할수 있을 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.38-38
• /
• 2021

전 세계적으로 기후변화의 영향으로 인해 수문·기상 등 다양한 분야에서 심각성이 야기되고 있으며, 가뭄, 집중호우, 태풍 등과 같은 자연재해의 발생빈도와 피해가 증가하고 있다. 우리나라의 경우 봄철 가뭄의 발생빈도가 증가하고 있으며, 발생지역이 확산되는 추세이다. 증발산량(evapotranspiration)은 기상학과 수문학에 주요한 농업기상 매개 변수로 다루어지며, 작물의 생육·성장에 필요한 물 수요 및 관개용수 산정에 필요한 인자로 가뭄 분석에 활용하는 중요 인자들 중 하나다. 증발산량 자료 구축에는 증발산계 (Lysimeter)를 이용하여 현장 데이터를 실측하는 방법과 구조화된 알고리즘을 통해 증발산량을 산출하는 방법으로 나누어진다. 우리나라의 경우 증발산계가 설치된 지역이 많지 않고 분포도 조밀하지 않으며, 기상, 식생, 토지 피복 등 다양한 요인들의 영향을 받는 증발산량의 특성상 실측 데이터를 구축하는 것은 현실적으로 어렵다. 이에 물수지 기법, 기상 변수 기반 추정 등 간접적인 방법을 통해 증발산량을 추정하는 연구가 일반적으로 진행되고 있다. 이에 본 연구에서는 미국항공우주국 (National Aeronautics and Space Administration, NASA) 제트 추진 연구소 (Jet Propulsion Laboratory, JPL)의 The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS)에서 제공하는 위성영상 중 증발산량 데이터를 구축하였다. 구축한 ECOSTRESS 증발산량 적합성 확인을 위해, 청미천·설마천에서 제공하는 증발산량과 비교 및 검증을 실시하였으며, 시공간적 변동성 분석을 위해 통계적 방법을 이용하였다. 본 연구에서 도출된 증발산량의 시공간 변동성 결과를 통해 지역별 가뭄 분석의 기초자료로 활용될 수 있을 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.82-82
• /
• 2021

전 세계적으로 가뭄은 농업·식량안보·수자원관리·생태계 등 다양한 분야에서 부정적인 영향을 미치고 있다. 일반적으로 가뭄은 강수량의 부족으로 발생하고, 지표수와 지하수의 가용성이 제한됨에 따라 작물생산 및 사회·경제적으로 피해가 발생한다. 이러한 영향은 특정 가뭄 모니터링 및 조기 경보와 관련하여 가뭄 지표를 결정할 때 중요한 고려사항이다. 가뭄을 분석하기 위해서는 가뭄 지표를 적용하여 정확하게 반영하고 나타내는 것이 중요하다. 가뭄의 특성을 객관적으로 정량화하기 어렵기 때문에 다양한 지표와 계산을 통한 가뭄 모니터링 및 분석 기술이 필요하며, 강수량, 토양수분, 증발산량 및 식생과 관련하여 가뭄 지표가 개발되었다. 본 연구에서는 혼합 가뭄 지표 (Drought Indicator Blends) 활용하여 우리나라의 가뭄을 분석하였다. 혼합 가뭄 지표는 NOAA (National Oceanic and Atmospheric Administration)의 기후 예측 센터 (Climate Prediction Center, CPC)에서 여러 가뭄 지수를 단기 또는 장기로 구분하여 통합, 개발되었다. 단기 및 장기 혼합 제품은 PDSI (Palmer Drought Severity Index), Z-Index, SPI (Standardized Precipitation Index)를 결합하여 가뭄을 추정한다. 혼합 가뭄 지표는 해당 지역의 단기 및 장기 가뭄을 이해하는데 유용하게 활용할 수 있으며, 현재까지 미국에서 활발하게 연구가 진행되고 있다. 단기 지표는 비관개 농업, 토양수분 등 강수량에 밀접한 관련이 있는 가뭄과 관련되어 평가하며, 장기 지표의 경우 관개 농업, 지하수위 등 장기간 가뭄과 연관성을 가지고 있다. 단기 및 장기 혼합 가뭄 지표를 우리나라에 적용함으로써 기존 단일 가뭄 지수를 활용한 가뭄 분석 이상으로 다방면에서 효율적인 가뭄 모니터링을 할 수 있을 것이라 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.397-405
• /
• 2024

In order to improve the visibility of nighttime thermal infrared images, a simulation method with daytime color images was proposed. As a simulation method consisting of two steps, the daytime thermal infrared image was simulated by learning the unpaired nighttime thermal infrared image and daytime thermal infrared image, then the result was translated into a daytime color image. A temperature change regression equation was constructed and applied to reflect the systematic characteristics of temperature changes in daytime and nighttime images, and day and night simulation and colorization were trained and modeled by CycleGAN. For the experimental area, 100 images were captured and used for training. As a result, the simulation showed an average SSIM of 0.2449 and a PSNR of 51.2254. It was confirmed that the method could simulate complex and detailed features such as vegetation.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.280-287
• /
• 1996

This study was carried out to investigate the export rate of suspended sediment by different precipitation intensity after forest road construction for torrential streams on three different watersheds with various forest road density(Watershed A : 6.67m/ha, Watershed B : 5.52m/ha, and Watershed C : control) in the Experimental Forest of Kangwon National University. The results were as follows. 1. Closely related to the the amount of rainfall in both 1994 and 1995, the average streanfkiw rate was less than $0.25{\times}10^4m^3/day$ during May and June and $5.0{\times}10^4m^3/day$ during July and August. More than $25{\times}10^4m^3/day$ of streanflow rate was occurred twice in 1994 and seven times in 1995. 2. The amount of suspended sediment in three watersheds was less than standard of drinking water(25mg/l) before road construction with daily rainfall of 74mm, 92mm, and 120mm in 1994, also after road construction with daily rainfall of 21mm and 47mm in 1995. But, under the 192mm of daily rainfall, Watershed C did not show the difference in the amount of suspended sediment, however, Watershed A and B produced 1,525mg/l and 775mg/l, respectively, which is 61 and 31 fold of stabdard of drinking water, and construction to export for 35 hours after rainfall. 3. The maximum amount of suspended sediment was less than the standard of drinking water with light rainfall before and after road construction. Under the 192mm of daily rainfall, the maximum amounts of suspended sediment in Watershed A and B were 13,150mg/l and 2,690mg/l, of 526 and 108 fold of standard of drinking water, respectively, showing obvious water pollution by sedimentation. Results of the study indicated that the forest road construction had great influence on the sedimentation, and getting increased by higher road density and heavier rainfall. Therefore such practices as vegetation covering and soil erosion control facility should be established accompanying with forest road construction to prevent from sedimentation.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.817-820
• /
• 2008

The river environments of many streams in korea have been deteriorate through the rapid industrialization and urbanization since the 1960s. In korea, on the other hand, much efforts on the research and project have been made for the restoration of the deteriorated streams to close-to-nature. in order to restore the deteriorated streams, therefore, it is necessary to investigate such advanced technologies and materials. In view of this requirement, various research paths are being taken focusing on coarse aggregates to make multi-functional porous concrete having continuous voids so as to improve water and air permeability, acoustic absorption, water purification and applicability to vegetation. The Purpose of this study is to investigate the method for recovery of the environment in the streams area using porous concrete retaining wall block. the multi-P.O.C block applies for test in the Jangduri-cheon have been monitored planting, stability etc. after 6 months, plant grows flourishing and reconstructed in state such as nature rivers.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2021

Photogrammetry using drone can produce high-resolution ortho image and acquire high-accuracy 3D information, which is useful. Therefore, this study attempted to determine the possibility of using drone-photogrammetry in park construction by producing a topographic map using drone-photogrammetry and analyzing the problems and accuracy generated during production. For this purpose, we created ortho image and DSM (digital surface model) using drone images and created topographic status map by vectorizing them. Accuracy was compared based on topographic status map by GPS (global positioning system) and TS (total station). The resulting of analyzing mean of the residuals at check points showed that 0.044 m in plane and 0.066 m in elevation, satisfying the tolerance range of 1/1,000 numerical maps, and result of compared lake size showed a difference of about 4.4%. On the other hand, it was difficult to obtain accurate height values for terrain in which existed vegetation when producing the topographic map, and in the case of underground buried objects, it is not possible to confirm it in the image, so direct spatial information acquisition was necessary. Therefore, it is judged that the topographic status map using drone photogrammetry can be efficiently constructed if direct spatial data acquisition is achieved for some terrain.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.311-326
• /
• 2022

The Compact Advanced Satellite 500-4 (CAS500-4) is under development to efficiently manage and monitor forests in Korea and is scheduled to launch in 2025. The National Institute of Forest Science is developing 36 types of forestry applications to utilize the CAS500-4 efficiently. The products derived using the remote sensing method require validation with ground reference data, and the quality monitoring results for the products must be continuously reported. Due to it being the first time developing the national forestry satellite, there is no official calibration and validation site for forestry products in Korea. Accordingly, the author designed a calibration and validation site for the forestry products following international standards. In addition, to install calibration and validation sites nationwide, the authors selected appropriate sensors and evaluated the applicability of the sensors. As a result, the difference between the ground observation data and the Sentinel-2 image was observed to be within ±5%, confirming that the sensor could be used for nationwide expansion.