• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.777-785
• /
• 1997

This study was conducted to clarify the hydrological characteristics of subsurface flow through a soil matrix and macropores. The research facility was set up in a 20m-1ong trench excavated down to bedrock at the base of a hillslope in the Panola catchment under USGS Georgia district. 13 macropores were found on the trench face and 6 major macropores were monitored. Matrix and macropore flow were measured during 95.5mm rainfall on March, 6 to 7. 1996. Macropore flow had great influence on formation of peak flow because the delivery time to Peak flow of macropore flow were faster about 10hrs than those of matrix flow. Matrix flow continued to recess for 3 days. On the other hand, macropore flow stopped within 12hrs after the event ceased. This means that matrix flow controls the recession part. The spatial variations of matrix and macropore flow between each trough and collector were very large by a wide range of 8,655.3 $\ell$ to 17.8 $\ell$ . The bed rock surface topography relates closer with the spatial variations of the flow than the surface one.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2007

The normalized difference in incident solar energy between a target surface and a level surface (overheating index, OHI) is useful in eliminating estimation error of site-specific maximum temperature in complex terrain. Due to the complexity in its calculation, however, an empirical proxy variable called northern exposure index (NEI) which combines slope and aspect has been used to estimate OHI based on empirical relationships between the two. An experiment with real-world landscape and temperature data was carried out to evaluate performance of the NEI - derived OHI (N-OHI) in reduction of spatial interpolation error for daily maximum temperature compared with that by the original OHI. We collected daily maximum temperature data from 7 sites in a mountainous watershed with a $149 km^2$ area and a 795m elevation range ($651{\sim}1,445m$) in Pyongchang, Kangwon province. Northern exposure index was calculated for the entire 166,050 grid cells constituting the watershed based on a 30-m digital elevation model. Daily OHI was calculated for the same watershed ana regressed to the variation of NEI. The regression equations were used to estimate N-OHI for 15th of each month. Deviations in daily maximum temperature at 7 sites from those measured at the nearby synoptic station were calculated from June 2006 to February 2007 and regressed to the N-OHI. The same procedure was repeated with the original OHI values. The ratio sum of square errors contributable by the N-OHI were 0.46 (winter), 0.24 (fall), and 0.01 (summer), while those by the original OHI were 0.52, 0.37 and 0.15, respectively.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.124-129
• /
• 2000

Nitrogen and P in surface runoff and eroded sediment from cropland areas can contaminate streams and lakes. Runoff losses of N and P were determined in a small field plot $(14.3{\times}24.8\;m)$ of peach orchard from March to November in 1999. Nitrogen and P were applied in the rate of 172 and 46 kg/ha using chemical fertilizer and mixed oil cake fertilizer. During the season, in 26 rainfall events, $421.5\;m^3/ha$ of runoff including 1,989 kg/ha of soil loss was collected. Concentrations of total-N, $NO_3-N$, $NH_4-N$, total-P and $PO_4-P$ in runoff samples were in the range of $4.7{\sim}171.0,\;0.1{\sim}188.0,\;0.13{\sim}3.36$, $0.58{\sim}4.99$ and $0.05{\sim}3.71\;mg/l$, respectively. Total loss of N was 16.39 kg/ha and 75% of the loss was $NO_3-N$. Total loss of P was 1.04 kg/ha, and $PO_4-P$ and sediment bound P accounted for 47 and 27% of the total loss, respectively. The losses of N and P were about 9.5 and 2.3% of the applied N and P in the plot, respectively. Although the loss of N or P would be relatively small in agricultural aspect, considering the high concentrations of N and P in runoff, loss of N and P from croplands should be controlled to reduce the eutrophication problem of stream waters.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.119-132
• /
• 2012

Recently, forest soil sediment disasters resulting from locally concentrated heavy rainfall have been occurring frequently in steep slope areas. The importance of landslide hazard map is emerging to analyze landslide vulnerable areas. This study was carried out to develop HyGIS-Landslide based on Hydro Geographic Information System in order to analyze forest soil sediment disaster in the mountainous river basin. HyGIS-Landslide is one of HyGIS components designed by considering the landslide hazard criteria of Korea Forest Service. It could show the distribution of landslide hazard areas after calculating the spatial data. In this system, the user could reset the weight of hazard criteria to reflect the regional characteristics of the landslide area. This component provided user interface that could make the latest spatial data available in the area of interest. HyGIS-Landslide could be applied to the surveyor's compensation score and it was possible to reflect the landslide risk exactly through it. Also, it could be used in topographic analysis techniques providing spatial analysis and making topographical parameters in HyGIS. Finally the accuracy could be acquired by calculating the landslide hazard grade map and landslide mapping data. This study applied HyGIS-Landslide at the Gangwon-do province sample site. As a result, HyGIS-Landslide could be applied to a decision support system searching for mountainous disaster risk region; it could be classified more effectively by re-weighting the landslide hazard criteria.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.767-776
• /
• 2014

Changes in climate have largely increased concentrated heavy rainfall, which in turn is causing enormous damages to humans and properties. Floods are one of the most deadly and damaging natural disasters known to mankind. The flood forecasting and warning system concentrates on reducing injuries, deaths, and property damage caused by floods. Therefore, the exact relationship and the spatial variability analysis of hydrometeorological elements and characteristic factors is critical elements to reduce the uncertainty in rainfall-runoff model. In this study, grid resolution depending on the topographic factor in rainfall-runoff models presents how to respond. semi-distribution of rainfall-runoff model using the model GRM simulated and calibrated rainfall-runoff in the Gamcheon and Naeseongcheon watershed. To run the GRM model, input grid data used rainfall (two event), DEM, landuse and soil. This study selected cell size of 500 m(basic), 1 km, 2 km, 5 km, 10 km and 12 km. According to the resolution of each grid, in order to compare simulation results, the runoff hydrograph has been made and the runoff has also been simulated. As a result, runoff volume and peak discharge which simulated cell size of DEM 500 m~12 km were continuously reduced. that results showed decrease tendency. However, input grid data except for DEM have not contributed increase or decrease runoff tendency. These results showed that the more increased cell size of DEM make the more decreased slope value because of the increased horizontal distance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.529-536
• /
• 2013

The semi-distributed rainfall runoff model of SWAT is applied to the Seom-river experimental watershed. The simulations of various antecedent periods before the targeted simulation periods of 2002 to 2009 are not necessary despite of the slight appearance of corresponding changes in simulated total runoff. The simulated results of total runoff by using various numbers of soil layer maps have little differentiated nevertheless the slight changes in simulated results have been appeared. The 7 parameters of CANMX, $CN_2$, ESCO, GW_REVAP, SOL_ALB, SOL_AWC, and SOL_K greatly govern the rainfall runoff are confirmed and their sensitivity analyses have been carried out. The optimal parameters used in SWAT are derived by SUFI-2 of SWAT-CUP. The NS and $R^2$ are 0.99 and 0.98, respectively which is shown the good agreement between the observed and the simulated results. The uncertainty factors of P-factor and R-factor are 0.85 and 0.06, respectively which is also shown the high efficiency of the model. The high applicability is also shown with improving the RMSE in SWAT model simulation using the parameters estimated by SUFI-2 of SWAT-CUP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1897-1901
• /
• 2010

이동식 전자파표면유속계를 이용한 홍수유량의 산정을 위해서 임의의 유량측정지점에서 측정한 표면유속 값에 수심평균유속환산계수 0.85를 적용하여 그 지점의 평균유속을 계산하고 있다. 이로 인해 각 지점에서 흐름조건 및 기상학적으로 요인으로 인한 이 계수의 변동성을 고려하지 않은 상태로 유량을 산정하게 되어 각 흐름조건을 고려한 유량산정을 할 수 없는 실정이다. 이에 하천 현장에서 표면유속과 수심별유속의 실측 자료를 이용하여 흐름조건에 따른 표면유속과 평균유속의 관계를 파악하고자 하였다. 이를 위하여 용담 수자원시험유역의 동향지점에서 하천을 횡단하며 바닥에서 수표면까지 수심방향으로 0.05~0.10 m의 간격으로 프로펠러 유속계를 이용하여 정밀법으로 각 수심에서의 유속을 측정하였다. 정밀측정된 수심별 유속을 이용하여 평균유속을 산정하고 이를 수체 (water column)의 가장 최상층에서 측정한 유속을 표면유속으로 가정한후 이로부터 수심평균유속환산계수를 산정하여 흐름조건에 따른 계수의 변화를 조사하였다. 하천 현장에서 흐름조건의 변화에 따른 표면유속과 수심별유속의 정밀측정을 통한 이들 깊이별 유속의 변화여부를 용담수자원시험유역의 동향지점에서 현장조사를 실시하였다. 측정당시 풍속이 느려서 (1.5~3.1 m/s) 바람으로 인한 유속에 미치는 영향이 수심별 유속분포상으로는 거의 나타나지 않았다. 다만 양안에서 평균유속과 표면유속이 역전되는 현상이 발생되었는데 이는 벽면 마찰에 바닥마찰의 영향이 추가됨에 따른 것으로 판단된다. 수심별 유속측정 결과를 전체적으로 분석한 결과 환산계수가 0.632~1.352로 넓게 분포하고 있다. 환산계수가 1.0 이상인 경우는 양안에 인접한 두 지점인데, 이들 두 경우는 유속분포가 이론적인 유속분포와는 상반된 유속이 측정 - 표면유속이 수심평균유속보다 느림 - 되었다. 환산계수가 0.6~0.8 사이에서 형성된 경우는 표면유속이 평균유속보다 25~55% 정도 빠르게 나타나고 있다. 전제 측정결과를 검토해보면, 전반적으로 양안에 인접한 측선에서 표면유속이 평균유속보다 느려지는 현상이 나타나고 있다. 또한 유속이 1.0 m/s 이상인 경우에 0.677~0.790의 환산계수 값을 보이는데 이 경우 수심이 50 cm 이하여서 바닥마찰의 영향이 큰 것으로 판단된다. 다양한 흐름조건별 표면유속과 수심별유속의 측정을 할 수 있는 현장여건 - 유속, 수위 등의 동일흐름 조건에 대해서 -에 많은 부분이 제약되어 이의 정밀분석이 힘든 실정이다. 따라서 이러한 현장측정시의 제약성을 극복하기 위해서 여러 가지 흐름조건을 구현할 수 있는 정밀제어가 가능한 실내실험장치를 이용한 면밀한 분석이 필요하다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.2
• /
• pp.47-56
• /
• 2013

There are many technical problems, which can not be resolved by the concept of saturated soil mechanics. Unsaturated soils show an apparent cohesion due to negative pore pressure and relatively lower permeability due to entrapped air compared to saturated soils. The determination of engineering properties of soils with various moisture content is very important to evaluate shear strength and stability of natural and engineered soils. So various researches should be made on unsaturated soils. Especially, sandy soils are widely distributed near Nakdong river, one of the four rivers where Restoration Projects were carried out. Many structures such as dams, flood control facilities, detention facilities and reservoirs have been built in this area. In this study, unsaturated triaxial compressive tests were conducted on sands or silty sands at Nakdong river in order to provide their fundamental characteristics for design and construction of geotechnical structures. As a result of the tests, the maximum deviator stress increased as the confining stress and matric suction increased. The cohesion increased non-linearly as the matric suction increased, but the angle of internal friction was marginally changed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1417-1431
• /
• 1994

In this study, shear strength characteristics of the Nak-Dong river sand in Taegu area are investigated by triaxial compression test, considering shear strain control velocity, relative density, and confining pressure. The results from Lade model and Modified Lade model are compared with the measured value in the laboratory test. The results by the change of shear strain control velocity, relative density, and confining pressure are as follows; 1) The stress limit, which can be Coulomb's law about the Nak-Dong river sand, have ranged 120~200 kpa at 0.08%/min and 120~150 kpa at 0.5%/min. These limits are smaller than that of the calcareous sand and the well-graded, quartz sand. 2) The parameters needed to Lade model and Modified Lade model are much affected by the strain control velocity and the relative density. Consequently, in the field, it is important to use parameters aptly after accurately understanding both the loading condition and subsoil condition. 3) Overall, the principal stress ratio obtained from constitutive model equations is not affected by the control velocity, but both the relative density and confining pressure affect the result of constitutive model equations. Consequently, the study on the various conditions about the relative density and confining pressure is needed to accurately predict the stress-strain behavior on the Nak-Dong river sand. 4) For the range of the used confining pressure in the study, the Lade model shows better agreements with the measured value than the Modified Lade model, comparing the measured value with the principal stress ratio at failure and the internal friction angle of failure envelope obtained from the Lade model and Modified Lade model.

• Journal of Environmental Impact Assessment
• /
• v.24 no.5
• /
• pp.516-531
• /
• 2015

In this study, a software module to predict the effectiveness of vegetation buffer strip (VBS) has been developed for using with Chemicals, Agricultural Management and Erosion Losses (CAMEL), a distributed watershed model. Most basic functions for the VBS module are same as CAMEL except functions newly developed to implement sedimentation enhancement by vegetation and level spreaders. For verification of the VBS module, sensitivity analyses for length, roughness, soil and vegetation type of VBS were carried out using a test grid cell. The surface discharge of sediment are highly sensitive to the roughness coefficient of VBS. The removal efficiencies of VBS for the surface discharges of sediment and TP are generally high regardless of environment changes. The surface discharges of TOC and TN are highly sensitive to the length and soil of VBS. The removal efficiencies of VBS for the surface discharges of TOC and TN are generally lower than those of sediment and TP. The newly developed VBS module reasonably simulates the removal efficiencies of surface discharges that vary according to the environment changes. It is expected that this VBS module can be used for evaluating the effectiveness of VBS-based best management practices to be applied to reduce pollution discharges from various non-point sources.