• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.164-170
• /
• 2002

현재 농업용 장비들은 특성상 사용자에게 심한 양의 진동을 가하고 있다. 이는 사용자에게 나쁜 승차감을 주고 또한 장시간 운전시에는 건강에도 좋지 않은 영향을 줄 수 있다. 본 연구에서는 농업용 트랙터에서 사용자에게 전달되는 진동의 양을 측정하여 사용자가 느끼는 승차감을 정량적으로 측정하고 또한 건강에 미칠 수 있는 영향에 대해 평가해 보았다. 실험은 포장도로와 농로 그리고 논갈기 작업시에 인체에 전달되는 12축의 진동을 측정하였고, 또한 트랙터에 사용되는 서스펜션 시트의 특성을 보기 위해 시트 아래의 수직방향 진동을 측정하였다 실험에 참가한 피실험자는 모두 현재 트랙터를 사용하고 있는 4명을 대상으로 하였다 실험 결과 현재의 트랙터는 사용자에게 좋지 않은 승차감을 주고 있으며 건강에도 좋지 않은 환경을 제공하고 있음을 볼 수 있었다. 이러한 환경을 개선하기 위해서는 서스펜션 시트의 설계가 중요하게 되는데 보다 좋은 승차감을 제공하기 위해서는 인간이 민감하게 느끼고 또 트랙터에서 많은 양이 나타나는 주파수 대역의 진동을 저감하기 위한 설계가 필요하다고 할 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.138-145
• /
• 2005

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2009

A simplified model of seat-human body is presented to analyze vibrations of human body on a seat of vehicle. The theoretical model having seven degrees-of-freedom is composed of the inter-connected masses, springs and dampers. Until now, evaluation of ride comfort has been usually performed only through vehicle tests. This study aims to complement shortcomings of conventional vehicle tests in evaluation of ride comfort by using the theoretical model. The acceleration values of the human body are obtained from frequency response functions of the theoretical model. Thereafter, Ride and SEAT indexes are acquired by considering response characteristics of the human body for the 12 axes that are presented in BS 6841. A vehicle test is carried out to measure the acceleration values for the three parts of the human body such as upper body, hip and foot. Ride and SEAT indexes of the vehicle test are also obtained by considering the response characteristics of the human body, of which results are compared with the values from the theoretical model. It is found that the theoretical results are in good agreement with the experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.145-152
• /
• 2004

This paper compares seat vibrations of a small passenger car and a SUV. The results also include the comparison of the human body accelerations and the ride values, such as the component ride values, and SEAT values of 12 axis accelerations obtained at the human body and seat track. The ride comfort evaluation is usually carried out by experiments of real cars which are expensive and sometimes may contain errors by passenger's postures. Simulations by computer, on the other hand, enable to solve these problems when the accuracy is proven. This paper, thus, also shows the correlation of human body vibration between experiments and computer simulations. For the computer simulation, korean dummy models are developed from the Hybrid III models by scaling the body data of Hybrid III to those of Korean men and women. From the comparison between the test data and simulation data, a nice correlation in trends was shown.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5689-5695
• /
• 2012

In this study, vibration properties of seat and human body are analyzed through test and numerical analysis methods by taking into account the viscoelastic characteristics of polyurethane foam as seat material which is applied for vehicle. These viscoelastic characteristics which show nonlinear and quasi-static behavior are obtained by compression test. In addition, the viscous elastic property of polyurethane foam is modelled mathematically by using convolution integral and nonlinear stiffness model. In order to analyze the performance on ride comfort of seat, vertical vibration model is established by using dynamic model of seat and vertical vibration model of human body at ISO5982, and so the related motion equations are derived. A numerical analysis simulation is applied by using the nonlinear motion equation with Runge-Kutta integral method. The dynamic responses of seat and human body on the input of vibration acceleration measured at the floor of the railway vehicle are examined. The variation of the index value at ride comfort on seat design parameters is analyzed and the methodology on seat design is suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.388-395
• /
• 2009

To investigate the flexural behavior of RC beams strengthened with glass fiber sheets, 1 control beam and 8 strengthened beams (4 NU-beams without U-shaped band and 4 U-beams with U-shaped band) are tested. The variables of experiment are composed of the number of glass fiber sheets and the existence of U-shaped band, etc. The maximum load was increased by 48% and 34%, and the flexural rigidity by 920% and 880% for NU-beam and U-beam, respectively, compared with those of the control beam. The ductility ratios were 1.43$\sim$2.60 for NU-beam and U-beam. The experimental results showed that the strengthening system with U-shaped band controls the premature debonding and provides a more ductile failure mode than the strengthening system without U-shaped band. It can be found from the load-deflection curves that as the number of fiber sheets is increased, the maximum strength and the flexural rigidity is increased. The experimental results are compared with the analytical results of nonlinear flexural behaviors for strengthened RC beam. The experimental and analytical results were well agreed.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.1025-1030
• /
• 1997

This paper introduces the experimental results of ride values assessed for several passenger cars. The experiment was conducted at four vehicles on two roads for three persons by measuring the acceleration in the 12-axis of human. The results include the comparison of the ride values, such as the component ride values, overall ride value, and seat effective amplitude transmissibiity. It is proved that acceleration between 1 and 15Hz is the most significant in evaluating the ride quality. The contribution of the acceleration in each measurement axis is quantified from the component ride value. SEAT value shows a relatively low sensitivity for the road condition and human mass.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.477-486
• /
• 2008

External bonding of carbon fiber reinforced plastic sheets has recently emerged as a popular method for strengthening reinforced concrete structures. The behavior of CFRP-strengthened RC structure is often controlled by the behavior of the interface between CFRP sheets and concrete. In this study, a review of models on bond strength, bond-slip, and interfacial stresses has been first carried out. Then a new bond-slip model is proposed. The proposed bond-slip model has bilinear ascending regions and exponential descending region derived from modifications mode on the conventional bilinear bond-slip model. The comparison of the results with those of existing experiment researches on bond-slip models indicate good agreements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.293-294
• /
• 2012

백색 OLED 조명 분야에서 색 변환은 큰 이슈가 되고 있다. 하지만 청색 유기물의 발광 특성이 좋지 못하여 아직까지 정착이 되지 못하고 있는 것이 현실이다. 본 연구에서는 발광 효율이 낮은 청색 OLED 대신 청색 LED와 황색 OLED를 사용하여 색 변환을 통한 백색 발광 panel을 제조하고 전기 및 광학적 특성을 평가하였다. 먼저 OLED소자는 진공증착방법을 사용하여 ITO (150 nm)/KHI-001 (5 nm)/LG-101 (10 nm)/KHT-001 (25 nm)/ PGH-02 (25 nm): Ir (mpp) 3 (8%): PRD-003 (0.3%)/TMM-004 (10 nm)/LG-201 (20 nm): LiQ (50%)/Al (150 nm) 구조를 갖는 발광면적 $70{\times}70mm^2$의 황색 OLED panel을 제작하였다. CIE 1931색좌표는(0.49, 0.49)이고, 효율은 $41.61{\ell}m/W$이다. 그리고 LED는 청색 칩을 한 줄로 나열하여 LED bar를 만들었고 여기에 도광판, 리버스 프리즘시트, 확산시트 그리고 반사시트를 더하여 점광원을 면광원화 하였다. CIE 1931색좌표가 (0.15, 0.04)이며 효율은 $3.56{\ell}m/W$이다. 황색 OLED를 청색 LED 면광원 뒤에 붙여서 두 빛이 도광판 위쪽으로 나오게 하였다. 이렇게 hybrid된 빛은 인가 전류를 변화 시킴으로써 색온도 3,200 K의 warm white에서 7,800 K의 cool white까지 변환이 가능하였다. 그리고 순백의 hybrid 빛을 얻을 수 있었는데 이때의 색온도는 4200K이고 CIE 1931색좌표는(0.34, 0.33)이며 연색지수는 89였다.