• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.60-68
• /
• 2019

For effective building maintenance, the collection and management of various maintenance date such as work history information and material information is required. Despite the introduction of information management technologies and systems to reduce the amount of maintenance work of buildings, which have become larger and more complex, the maintenance information is not being utilized properly. As an alternative, research on the introduction and utilization of BIM is being conducted continuously. However, the BIM models generated at the design phase are not utilized in practice due to a lack of architectural maintenance information. This study proposed a COBie document prototype to support BIM-based smart maintenance tasks performed by building managers. In order to formalize various types of maintenance work procedures, a BIM-based maintenance process model is presented in two categories: inspection and maintenance. Among the BIM attribute data of the BIM model generated at the design phase, the parameters corresponding to the maintenance necessary information for each basic process are derived. Based on this, we proposed a COBie document prototype consisting of seven spreadsheets. The results of a case study confirmed that the KBIMS library-based BIM model created at the design phase without the maintenance information can be used at the maintenance phase.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.115-115
• /
• 2017

티타늄에 있어서 주요 침입형 원소인 산소는 결함을 일으키는 원인으로 산소함량을 줄이는 연구가 활발히 진행되고 있다. 최근 가장 많이 이용되는 탈산 방법은 칼슘 및 칼슘염화물의 높은 산소 친화력을 이용하는 것이다. 칼슘염화물 플럭스를 사용하여 칼슘을 용해하고, 티타늄과 반응한 탈산생성물인 칼슘산화물을 플럭스 내에 용해시키는 방법이다. 이러한 방법으로 티타늄 와이어 및 시트 내 산소를 저감한 연구가 보고되었다. 티타늄 탈산의 제일 큰 구동력은 티타늄 내 산소원자의 확산이다. 티타늄의 탈산온도가 1,155K 이상으로 증가하면 hcp에서 bcc 구조로 변태되는데 이러한 구조에서 산소의 확산은 더 활발해진다. 실제로 티타늄의 변태온도 이전에서는 확산속도가 낮아서 큰 변화가 없지만, 1,273K 고온의 bcc 구조에서는 확산속도가 빨라서 그 이전에 비해 100배 이상 빠르게 원자 이동이 일어나는 것으로 알려져 있다. 하지만 이러한 탈산 방법은 티타늄 원재료가 벌크 형태에서 주로 연구되었으며 티타늄 분말에 대한 탈산 연구는 보고된 바가 많지 않다. 이는 높은 탈산온도에서 칼슘의 용해로 인한 분말의 건전한 회수가 어렵기 때문이다. 이러한 문제를 해결하기 위해 본 연구진은 칼슘 증기를 이용한 비접촉식 탈산 용기를 제작하여 티타늄 분말을 변태온도 이상에서 탈산하여 1,000ppm 이하 저산소 티타늄 분말을 회수하였다. 칼슘을 이용한 티타늄 내 산소의 제거 메커니즘을 깁스자유에너지와 각각의 분압에 의해 설명하고 있다. 가장 일반적인 설명은 티타늄 내 산소가 탈산온도에 따라 확산하게 되며 이러한 산소는 티타늄의 표면에서 티타늄 산화층을 형성한다. 이때 탈산제인 칼슘의 높은 산소 친화력으로 티타늄 산화층은 분해되어 칼슘산화물을 형성한다. 이러한 과정으로 티타늄 내 산소가 제거되는 것으로 알려져 있다. 하지만 많은 탈산 연구에도 불구하고 대부분의 연구 보고에서는 탈산 전후의 산소 농도 변화만 측정하였으며, 실제적으로 티타늄 탈산 전후의 표면산화층의 변화, 티타늄 내부의 산소농도 변화 및 격자 변형에 대한 연구는 보고된 바 없다. 따라서 본 연구는 1,000 ppm 이하 저산소 티타늄 분말 제조에 있어서 탈산 전후 표면 산화층 및 내부 산소 농도 등을 분석하여 탈산 거동에 대해 관찰하였다. 본 연구에서 비접촉식 탈산용기를 이용하여 칼슘 증기에 의한 탈산에 의하여 1,000 ppm 이하 저산소 티타늄 분말 제조하였고, 탈산된 분말을 티타늄 원재료와 비교하여 표면 산화층, 격자 변형, 내부 산소 농도 등을 분석하여 탈산에 따른 산소 거동을 살펴보았다. 탈산된 티타늄 분말의 표면 산화층은 원재료 대비 73% 제거되어 약 3nm로 줄었음을 확인하였고, 또한 표면 산화층 감소뿐만 아니라 티타늄 분말 내부에서도 원재료보다 산소 농도가 감소하였음을 확인하였다.

• The Korean Journal of Quaternary Research
• /
• v.24 no.1
• /
• pp.11-24
• /
• 2010

Seongnyu Cave have developed along the NE-SW direction in carbonate rocks of the Joseon Supergroup. The cave mostly shows horizontal passages and contains three lakes. The main passage is about 330 m long with 540 m-long branches, thus the total length of the cave is about 870 m. Through cave diving, about 85 m-long new passages were discovered. Numerous speleothems such as soda straws, stalactites, stalagmites, columns, flowstones, rimstones, cave shields, cave corals, curtains (and bacon sheets), cave pearls, cave flowers, helictites and calcite rafts can be found in the cave. Especially, some speleothems which were believed to have grown in the past were discovered in the submerged passage, and a few stalactites, stalagmites, flowstones and columns were eroded (or corroded) by the cave stream that flowed on the floor. Because these speleothems only grow in subaerial environments within limestone caves, it appears that they grew when there was no lake in the cave and became submerged as the lake level rose in the cave. The presence of these speleothems in the lakes indicate that they only grew during glacial periods when sea-level was lower. Therefore, detailed investigation of these speleothems will provide invaluable information on paleoclimatic evolution around the Korean peninsula in the future.

• Archives of design research
• /
• v.14 no.2
• /
• pp.15-25
• /
• 2001

With the rapid development of current internet, digital age make human beings intangible. Haptic sense was recognized less important than visual sense and auditory sense, but it plays an important role in determining the quality of products. The goals of this study are embodying haptics using Visual and Auditory preception and designing Visual-Auditory Haptic interface, in the case of actual touching is required but impossible. This study was carried out 3 steps. Firstly, developing the concept of Visual-Auditory Haptic Interface(VAHI) was carried out to make it certain the direction of this study. To get common factors of VAHI, this study researched physical-mechanism of visual, auditory, and haptics senses, and psychological-mechanism. Secondly, identifying factors of V/A haptic sense was analysed by web-evaluation test, to be categorized 11 Emotional Haptic Factors(EHF) and some Design Haptic Factors(DHF). The relation of EHF and DHF was analysed and summarized to VAHI design check sheet. Finally, Applying DHF to VAHI by EHF according to VAHI design check sheet was validated by web-evaluation test, to be resulted 13% increase in reliability and the same in usability. Conclusively, the possibility of embodying haptics using Visual and Auditory preception was resulted to be valid. And this concept can be applied to an interface, such a internet shopping mall and virtual reality, which requires actual touching to perceive haptic information, but it is impossible.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.4
• /
• pp.107-112
• /
• 2015

PURPOSE: This study investigated the effects of lower limb and trunk muscles activation on seat angle and height during sit to stand and stand to sit. METHODS: Subjects were instructed to sit and stand on different angles and heights; $0^{\circ}$(43cm), $5^{\circ}$(48cm), $10^{\circ}$(51cm) and $15^{\circ}$(58cm). Measurements were conducted from sit to stand and stand to sit for external oblique, transversus abdominis, rectus femoris, vastus medialis, vastus lateralis, tibialis anterior and gastrocnemius muscle activation by surface EMG. The muscle activation was measured three times for five seconds in each posture, and the %RVC value was calculated after the exclusion of one second before and after this measurement. This calculation standardized the data from each participant so it could be comparatively analyzed. RESULTS: The external oblique, tibialis anterior, and erector spinae muscles showed significant difference in $10^{\circ}$(51cm), $15^{\circ}$(58cm) and $0^{\circ}$(43cm), rectus femoris, in $15^{\circ}$(58cm) and $0^{\circ}$(43cm)(p<.05) during sit to stand. The external oblique, tibialis anterior, and rectus femoris muscles showed significant difference in $0^{\circ}$(43cm) and $15^{\circ}$(58cm), erector spinae and vastus medialis muscles showed significant difference in $10^{\circ}$(51cm), $15^{\circ}$(58cm) and $0^{\circ}$(43cm)(P<.05) during stand to sit. CONCLUSION: The present study findings indicate that the toilet seat angle and height could affect muscle activities of the lower limb and trunk.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.209-214
• /
• 1997

The canned fruit flesh of orange (Onju, Citrus unshi Marc.) was stored at $5^{\circ}C,\;15^{\circ}C,\;and{\;}30^{\circ}C$ for 4 months and the contents of sugar, organic acids and vitamin C of stored orange were investigated. The contents of reducing sugar of orange stored for 4 months slightly increased from 4.91% to $5.39{\sim}7.95%$ and decreased as the temperature rised. The sugar was composed of $6.63{\sim}18.09%$ sucrose, $3.86{\sim}9.12%$ glucose and $3.59{\sim}9.51%$ fructose. The content of sucrose used in manufacturing process was the highest and decreased as the temperature rised and as the storage period prolonged, whereas the contents of glucose and fructose increased as the storage period prolonged. The content of citric acid in the sample was the highest $(50.41{\sim}90.15\;mg%)$ among the-citric, malic, maleic, ${\alpha}-ketoglutaric$ and oxalic acids. The organic acids decreased as the temperature rised after storage for 4 months. The content of vitamin C was $8.28{\sim}14.29\;mg%$ and decreased most pronouncedly at $30^{\circ}C$ after storage. The color of the samples did not change significantly, but the degree of transparency, L was $20.41{\sim}23.01$ after storing the sample.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.445-460
• /
• 2017

This study was carried out for three years from 2013 to 2015 to investigate the actual condition of pest control of domestic persimmon organically cultivated farmers, to select environment - friendly pest control materials for major pests, and to conduct field test of established control system. The main cultivated cultivar of the reader farmer of organic cultivation was "Buyou" and sprayed organic agricultural material 9~17 times per year for pest control. The most harmful pests were anthracnose, bugs, persimmon fruit worm, and scales, etc. The control materials used were organic lime sulfur mixture, red clay sulfur, emulsifier, bordeaux solution, and self-made plant extracts using garlic, ginkgo nut and pine tree. The effective materials for controlling anthrax were lime sulfur mixture and red clay sulfur. Garlic oil + citronella emulsion, shrubby sophora seed extract + tea extract was effective to control Riptortus clavatus and Euproctis subflava. When installed 60 ea per 10a of mating disruption trap in a sweet orchard, the fruit setting rate was improved by 30%. The results of field test of control system to control 10 times a year in organically grown persimmons were able to harvest fruit of 70.7%. However, since any kinds of pesticides can not be sprayed during the harvest season in September and October, the damaged by bugs did not decreased, and further research is needed.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.118-122
• /
• 1995

Escherichia Coli ornithine transcarbamylase is the enzyme which catalyzes the L-citrulline biosynthesis from L-ornithine and carbamyl phosphate. To facilitate the purification of enzyme which will be used for many biochemical studies such as structure and function relationships and catalytic mechanisms, the cloning and expression of E. coli argI gene for ornithine transcarbamylase was conducted. argI was amplified from genomic DNA of E. coli strain of $DH5{\alpha}$, by polymerization chain reaction (PCR) method. The amplified argI gene was ligated to the prokaryotic expression vector pKK223-3 and used for transformation of E. coli TB2 which was deficient of ornithine transcarbamylase. The over-produced enzyme by the tnansformant was purified by ammonium sulfate fractionation, heat denaturation and affinity chromatography. The result of SDS denaturation gel electrophoresis for the purified enzyme showed a single band of about 38 kDa of ornithine transcarbamylase. Kinetic data for the expressed enzyme gave almost the s?????? values as those of the wild type enzyme. The $k_{cat}$, of the enzyme was $1.0{\times}10^5min^{-1}$, and $K_ms$ for ornithine and carbamyl phosphate were 0.35 mM and 0.06 mM, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.21-30
• /
• 2013

As increasing number of large-size earthquake, the social interest of seismic retrofitting of RC structure is growing. Especially, the RC columns that are not reflected seismic design can not resist lateral loads by the earthquake. The brittle fracture of Non-seismic designed columns lead to full collapse of the building. Thus, the emergency columns reinforcement method is needed. That have a fast construction time, do not cause damage to the column. In the past, cross-sectional expansion method, a steel plate reinforcing method is applied mainly, but in recent years, carbon fiber sheet taking advantage of FRP (Fiber Reinforced Polymer) is widely used. In this study, retrofitting effect of seismic performance of FRP seismic reinforcement, which is possible to emergency construction, was examined. Reinforced concrete specimens were constructed to experimental study. The seismic performence of specimes retrifitted with FRP seismic reinforcement were evaluated. As a result, the seismic performance of specimen reinforced with FRP seismic reinforcement has been improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.145-152
• /
• 2013

As a typical construction material, concrete has been used in building all kinds of structures since the late $19^{th}$ century. Although it was recognized to secure durability as long as the regulations on design and construction have been reasonably complied, the trends of life-shortening and deterioration have frequently occurred due to all kinds of the external effects that have been experienced during the procedures of using the structures. To make matters even worse, deterioration of the concrete structures according to deterioration can not be controlled any more. Finally, the reality is that repair and maintenance are necessary in the maintenance aspect of the concrete structure. In this study, CRM(Chemical Resistance of Laminating Reinforcement Method), which had been developed to reinforce the surface of concrete and specially improve chemical resistance performance, has been applied to enhance the existing repairing and maintenance method. Therefore, the result has been drawn with comparison and analysis of the specimens applied with the general repairing and maintenance method and CRM through a variety of durability test in this study. With the result of the test, durability of the specimen applied with CRM has been more improved than the existing repairing and maintenance method, which is judged as because of the laminating effect due to reinforcement of epoxy impregnated of alkali-resistance fiber and double layered fiber reinforced seat.