• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.511-517
• /
• 2014

Recently, the fire by sheath heater has been occurred frequently on winter season. The sheath heater has simple internal structure and boils water simply. Therefore, the use of sheath heater has been increased. In this study, found the fire hazard property of sheath heater from understanding the fire mechanism through the experiment to get the measure for decreasing the occurrence of fire. For the analysis of the fire hazard property of the sheath heater, performed the test of temperature change and ignition temperature by using current product. On the result of test, the sheath heaters are the most dangerous appliance to arise fire. Water temperature controller attached to sheath heater is not sufficient to prevent overheating it. The sheath heater should have level switch of water and temperature controller for heater itself to shut off the power supply. Because the cause of fire by sheath heater is overheating itself in the situation of lack water.

• Journal of Korean Institute of Fire Investigation
• /
• v.4 no.1
• /
• pp.62-69
• /
• 2004

The purpose of this study on the sheath heater having high occurrence of fires in a small work place because of not having the safety device, was to find out the characteristics required in the field examination of the fires in the courses of investigation. The results of the experiments conducted and reviewed on the basis of the fire cases whose conditions of the ignition possibility were divided into A, E, C and D are as follows: When the sheath heater without safety device is left on the condition of the heat accumulation of which the temperature rapidly rise, and then ignite the inflammables of the surroundings. In such cases, it was characterized that the color change trace appeared even if no short trace was discovered in the power line.

• 방재와보험
• /
• s.151
• /
• pp.24-31
• /
• 2014

• 방재와보험
• /
• s.147
• /
• pp.28-37
• /
• 2013

• 방재와보험
• /
• s.103
• /
• pp.20-25
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2218-2219
• /
• 2008

본 연구는 반도체 기판 히팅 장치의 새로운 구조에 관한 것으로 기판의 바닥면에 밀착된 가열 플레이트층의 직접가열 구조에 따른 빠른 열 응답성 및 열손실 최소화를 이룰 수 있다. 또한 가열 플레이트층에 내장된 히팅 수단인 시즈히터의 접촉면적을 늘려 가열 유효면적 증가와 같은 효과를 갖는다. 이를 위해 감광막이 코팅된 기판과, 상기 기판의 바닥면에 밀착되는 가열 플레이트층, 절연 및 열손실을 최소화하기 위해 상기 가열 플레이트층의 바닥면에 밀착되는 운모층, 상기 운모층의 하부에 밀착되어 바닥 플레이트층으로 이루어지되, 상기 가열 플레이트 층은 바닥면 전체에 걸쳐 연속되는 홈부를 형성하고, 상기 홈부로는 기판을 가열하기 위한 시즈히터가 삽입되어 구성된다. 새로운 기판 히팅 구조를 사용하여 시간 경과에 따른 가열 플레이트의 온도 변화를 확인 한 결과, 간접가열방식인 기존 방식에 비해 약 40 %의 전력 절감효과가 있는 것으로 확인 되었다.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.425-430
• /
• 2012

• Journal of Power System Engineering
• /
• v.7 no.4
• /
• pp.31-37
• /
• 2003

This paper is a study on application of warm air circulator by using the carbon heating element with particle type. The main variables are the input current and amount of carbon heating source for experimental characteristics. The experimental results are obtained as follows. As the input current and temperature are increased, the resistance of heat source is decreased about $20{\sim}25%$ by the effect of negative resistance. As the amount of heating source is small, Joule heat is large with the input current. When the amount of heating source is 300 and the input current is 15A, the value of Joule heat is about 4604.6kJ/h. The heat production efficiency of carbon heating source is larger about 10% than the sheath heater.