• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.48-53
• /
• 2014

The underwater acoustic communication (UAC) is characterized by doubly spread channel. It is included in the time-variant doppler shift and delay-time spreads due to multiple paths. To compensate such distorted signals, various techniques including time-reversal processing, spatial diversity, phase estimator, and equalizer are being applied. In this paper, a spatial filter based on the beamforming is proposed as a method to mitigate such inter-symbol interferences that are generated in time-varying multipath channels. The proposed technique realizes coherent communications by steering the direction of the desired signals and improves the performance of UAC by increasing the signal-to-interference plus noise ratio using the array gain.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.487-492
• /
• 2004

본 연구에서는 인공신경망 기법을 이용하여 산사태 발생원인에 대한 가중치를 구하였다. 여름철 집중호우시 산사태가 많이 발생하는 강원도 강릉시 사천면 사기막리 와 주문진읍 삼교리에 해당한다. 산사태가 발생할 수 있는 요인으로 지형도로부터 경사, 경사방향, 곡률, 수계추출을, 정밀토양도로부터 토질, 모재, 배수, 유효토심, 지형을, 임상도로부터 임상, 경급, 영급, 밀도를, 지질도로부터 암상을, Landsat TM 영상으로부터 토지이용도와 추출하여 격자화 하였으며, 아리랑1호 영상으로부터 선구조를 추출하여 l00m 간격으로 버퍼링 한 후 격자화 하였다. 이렇게 구축된 산사태 발생 위치 및 발생요인 데이터 베이스를 이용하여 인공신경망 기법을 적용하여 산사태 발생 원인에 대한 상대적인 가중치를 구하였다. 인공신경망의 역전파 알고리즘을 이용한 사기막리 지역과 삼교리 지역의 산사태 가중치를 보면 GPS를 이용한 현장조사와 위성영상을 이용한 변화탐지 기법모두의 경우모두와 훈련지역을 실제 산사태 발생 지역과 경사도가 0°인 지역, 실제 산사태 발생 지역과 Frequence ratio를 이용하여 작성한 취약성도에서 산사태 발생이 낮을 것으로 예상되는 지역, Frequence ratio를 이용한 취약성도에서 산사태 발생이 높을 것으로 예상되는 지역 과 낮을 것으로 예상되는 지역의 경우에서도 경사도는 1.5～2.5배정도 높은 상대적 가중치를 나타냈다. 이러한 가중치는 산사태 취약성도를 작성하는데 활용될 수 있다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.157-165
• /
• 2000

A small hydraulic winch system with an automatic tension control unit was designed to improve the work efficiency of coastal small vessels and the dynamic response characteristics of the winch system operated in the open loop condition was investigated. The inlet and the outlet pressures in hydraulic motor, the torque and the rotating speed of winch drum were measured as a function of time, and the behaviour in autotension mode for stepped load changes was analyzed. The results obtained are summarized as follows : 1. The developed winch system for coastal small vessels will result in better fishing with improved efficiency and lower manpower consumption by remote control of winch system. 2. The rotating delay times of winch drum for on/off operations of solenoid valve were 0.09 see at CW mode and 0.04 sec at CCW mode, respectively. After the solenoid valve was controlled, response characteristics were unstable slightly but showed good tracking behaviour over short time. 3. The driving torque of winch system in autotension mode was kept almost constant of 55.9 kgf·m, and 11.1 then the rotating speed of winch drum was kept almost constant of 5.1 rpm in the larger torque than 55.9 kgf·m and 11.1 rpm in the lower torque than that. 4. The 5% settling times in the transient response characteristics of autotension mode under rapid increasing and decreasing conditions of load were 0.12 sec and 0.2 sec, respectively, and then the rotating speeds were 11 rpm and 5.3 rpm, respectively. 5. The tracking behaviour of torque and rotating speed by remote control operation were stable within 0.23 sec at CW mode and 0.37 sec at CCW mode, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4313-4319
• /
• 2013

The purpose of our study is to shorten the scanning time and minimize the inconveniences of the patients in acquisition of the black blood images using the signal void effect in the fast spin echo technique while keeping the diagnostic value of the test. Thirty-two consecutive patients who underwent black blood MR imaging were examed with additional double inversion recovery (DIR) sequence and the conventional fast spin echo (FSE) sequence. Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of the internal carotid arteries' lumen were compared in T1 and T2 weighted images to determine whether there are differences between the two techniques for depiction of the signal void effect inside the vessel wall. The FSE images showed lower SNR values than the DIR images in both of the T1 and T2 weighted images (11.49% and 13.66% respectively). While the CNR values were higher in the FSE images than in the DIR images in both of the T1 and T2 weighted images (8.69% and 7.55% respectively).There was no significant difference between the two techniques for either of the SNR or CNR (p>0.05, p>0.05 respectively). The DIR and the FSE images demonstrated almost identical imaging patterns. Therefore, it is anticipated that the use of FSE technique in acquisition of the black blood imaging could reduce the inconveniences of the patients during the scanning and minimize exam time while keeping the diagnostic value of the test.

• Korean Journal of Legislative Studies
• /
• v.27 no.1
• /
• pp.5-40
• /
• 2021

This study attempts to analyze gender gaps in voter turnout for three different types of elections held since 2017 at the aggregate level using the Central Election Management Commission's turnout data, paying attention to the importance of women's voting. The findings are as follows. First, modern gender gaps in voter turnout at the aggregate level are confirmed in most regions regardless of election types. Second, the gender gap in turnout varies with age. The gender difference is verified in the "widowhood effect," where turnout decreases in the oldest-old. In the new voter group, modern gender gaps appear in most regions. The reversed gender difference in turnout in the late 20s, which reflects the Korean society's characteristics, is confirmed in all elections. Third, it is unclear whether the reverse gender gap in turnout becomes more pronounced in urbanized districts. As urbanization progressed, modern gender differences in voter turnout across age groups are observed at the population-based size level. Paradoxically, the modern gender gap tends to be weak and turns into the traditional gender gap in younger age groups (in the late thirties) in Gangnam-gu and Seocho-gu, the most modernized districts in Seoul. These results show that the modern gender gap in turnout is now a common phenomenon and continues to be strengthened by newly recruited voters in Korea. Thus we should pay more attention to female voters' political behavior and a new approach beyond the developmental theory to understand the causal mechanism to generate the modern gender gap in voter turnout.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2005

This study was carried out to examine the effect of heavy traffic on chemical properties of soil in roadside trees of Daejeon city. Soil samples at 0~10cm and 10~30cm depths were collected from soil of the roadside trees, Platanus occidentalis, and Ginko biloba, Soil pH in heavy traffic regions were around 7.0 at 0~10cm and 10~30cm soil depths because of spraying of calcium chloride for snow moving. The concentrations of Fe, Cd, Cu, Zn, and Pb in soil were higher in heavy traffic regions(Daejeon Station and Daehwa Industrial Complex) than in light traffic region (Chungnam National University). The result could be from rubbing and wear of car tire and metals when they travel.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.25-33
• /
• 2012

Although it is important to reflect the accurate information of the ground condition in the tunnel design, the analysis and design are conducted by limited information because it is very difficult to consider various geographies and geotechnical conditions. When the tunnel is under construction, examination of accurate safety and prediction of behavior are overcome the limits of predicting behavior by Artificial Neural Network in this study. First, construct the suitable structure after the data of field was made sure by the multi-layer back propagation, then apply with algorithm. Employ the result of measured data from database, and consider the influence factor of tunnel, like supporting pattern, RMR, Q, the types of rock, excavation length, excavation shape, excavation over, to carry out the reliable analysis through field applicability of Artificial Neural Network. After studying, using the ANN model to predict the shearing displacement, convergence displacement, underground displacement, Rock bolt output follow the excavation over of tunnel construction field, then determine the field applicability with ANN through field measured value and comparison analysis when tunnel is being constructed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.189-192
• /
• 1999

수중소음체의 음원 특징을 해석하기 위해서는 배경잡음과 해면$\cdot$해저반사파의 영향이 적은 심해에서 측정하여 분석하여야 한다. 그러나 측정의 어려움으로 인공 수조에서 측정하여 수면과 수조벽에 의해 발생되는 반사파들을 제거하여 신호 고유의 특징을 해석한다 이러한 반사파들의 부가효과를 보상하여 수중소음체의 신호특징을 해석하기 위하여 정합필터배열처리(Matched Filter Array Process : MFAP)기법을 적용하고자 할 때 각 센서에 적용되는 정합필터는 처리시간의 문제로 인해 필터길이를 제한하여 구성되게 된다 정합필터는 수조의 임펄스응답함수의 시역전함수로 정의되는데 필터길이에 따라 수신신호 특징 개선 정도가 좌우된다 본 연구에서는 인공수조에서 부가되는 반사파들의 효과를 보상하여 수신신호 특징 개선을 위해 정합필터배열처리기법을 적용할 때 각 센서의 정합필터의 시간길이가 특징 개선에 미치는 영향을 신호대잡음비(SNR)로 정의하여 분석하였고 수조의 특성에 따른 최적의 정합필터 시간길이를 제안하고자 한다.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.11-17
• /
• 2002

The purpose of this study is the prediction of pollutant loads into Seomjin river watershed using neural networks model. The pollutant loads into river watershed depend upon the water quantity of inflow from the upstream as well as the water quality of the inflow into the river. For the estimation of pollutants into river, a neural networks model which has the features of multi-layered structure and parallel multi-connections is used. The used water quality parameters are BOD, COD and SS into Seomjin river. The results of calibration are satisfactory, and proved the availability of a proposed neural networks model to estimate short-term water quality pollutants into river system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.631-636
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever- changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6\mu\textrm{s}$, $8\mu\textrm{s}$ and $10\mu\textrm{s}$, pulse-off-time to $8\mu\textrm{s}$, $10\mu\textrm{s}$ and $13\mu\textrm{s}$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively