• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.1
• /
• pp.30-43
• /
• 2003

The geography, circulation pattern, and ecology show that the semi-closed seas of Northwest Pacific be managed as one complete system. Ongoing multilateral cooperative efforts relevant to marine environmental protection in the Northwest Pacific area, include the Working Group for the Western Pacific (WESTPAC) established under the auspices of WNESCO's Intergovernmental Oceanographic Commissions, the UNDP/GEF Programme on Prevention and Management of Marine Pollution in East Asian Seas (PEMSEA), the North Pacific Marine Science Organization(PICES), and the United Nations Environment Programme(WNEP)'s Northwest Pacific Action Plan(NOWPAP). The present report firstly describes the current situations on the existing regional cooperative regimes for marine environmental conservation in the Northwest Pacific region, with a special respect to the Northwest Pacific Action Plan(NOWPAP) which was adopted in 1994 by Japan, People's Republic of China, Republic of Korea and Russian Federation. Then, problems of the existing regimes are also discussed, together with the suggestion of the possible solutions, focusing on NOWPAP. Suggestions include: 1) the Northeast Asian countries should understand the importance of legally-binding regional convention, and should build up any legally-binding instrument which can function as a big umbrella for real regional cooperation without prejudice to the rights of the States, 2) At present stage, it will be possible to make a regional convention flexible without prejudice to the sovereign right of the States or territorial issues; 3) taking into account that the region often faces many generic political problems that often inhibit the effective collective actions on environmental issues, the leadership from UNEP or other international organizations is required; 4) strong institutional and financial framework should be made, and 5) multilateral efforts to respond to the new marine environmental threats should be taken at the regional level in order to protect the coastal and marine environments in the Northwest Pacific.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.109-120
• /
• 2006

Part of public arts, environmental builforms not only enhance the beauty of a building, but also serve to stabilize the citizen's psychology and as a landmark having intimate values with the city environment and symbolic meanings. Thus they do have sociocultural values as an original formative artwork. The purpose of this study was to suggest evaluation and review methods and an evaluation framework for environmental builtforms, which had legal binding under the building decoration system, to a local government to improve the quality level of urban environment. It will be such a distant goal of creating a desirable urban environment as long as environmental builtforms are merely regarded as an object to follow a vogue and a mandatory passage procedure. It's important to take a perspective of an expert to set up and suggest an evaluation system in the public aspects. In the study a consideration was made of the current systems and review criteria of environmental builtforms, which was followed by the development of a theoretical research model and of a framework for statistical evaluation by a group of experts. The questionnaire designed based on the theoretical research model was tested for validity and reliability. Its pilot test results were then analyzed to verify the hypotheses. The questionnaire collected twice were statistically analyzed in exploratory and confirmatory factor analysis with the SPSSWIN 11 program. All the analysis results were used to come up with a final evaluation framework.

• Archives of design research
• /
• v.17 no.1
• /
• pp.373-382
• /
• 2004

Large sized buildings have proliferated in the modern world in order to solve problems caused by the growth of cities, and this trend has lead to diversity in style and utilization of interiors. In particular, wayfinding within the shopping mall for a customer is a common problem, so if customers do not have to face these navigational problems and could find the way more easily, then shopping mall or the store can expect much better profits. Therefore, directional sign system that can provide accurate and speedy information for customers with diversified ages, gender and knowledge is necessary. Firstly, the definition and element of all directional sign are analyzed through the existing literature survey. The elements are based on the practical elements and six categories such as type, pictogram, color, layout, form, and location were considered. Secondly, directional signs in large underground shopping mall was considered, and the speciality of the underground shopping mall was investigated, and finally top three underground shopping malls was analyzed. Thirdly, through the questionnaire, an objective appraisal of directional signs and problems was developed, and following possible improvement was suggested. This study has its own limitations since it is only applicable to the specific locations, however, directional designs will be useful in other types of buildings as well. Through the continuous studies of the users' psychology, these kinds of studies will be related to the environmental characteristics of various places.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.190-196
• /
• 2020

FRACAS(Failure Reporting, Analysis and Corrective Action System) has been applied in various industries to improve the reliability of the systems. FRACAS is effective in improving reliability by repeating failure analysis, proper corrective action, and result verification for identified failures. However, FRACAS has many limitations in terms of process, data collection and management to be integrated into the existing development environment. In the domestic defense industry, studies on the development of FRACAS system and process improvement have been conducted to solve the difficulties of applying FRACAS, but most of them are concentrated in the operation/maintenance phase. Since FRACAS should be conducted in consideration of TLCSM(Total Life Cycle System Management), it is necessary to study the reference architecture so that FRACAS can be applied from the early design phase. In this paper, we studied the TLCSM-based integrated architecture considering the system life cycle phases, FRACAS closed-loop process, and FRACAS essentials in order to effectively apply FRACAS throughout the life cycle of defense systems. The proposed architecture was used as a reference model for FRACAS in a shipboard combat system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.436-442
• /
• 2020

ESS(energy storage system) has recently become an important power source in various areas due to increased renewable energy resources. The more ESS is used, the less the effective capacity of the ESS. Therefore, it is important to manage the remaining useful lifetime(RUL). RUL can be checked regularly by inspectors, but it is common to be monitored and estimated by an automated monitoring system. The accurate state estimation is important to ESS operator for economical and efficient operation. RUL estimation model usually requires complex mathematical calculations consisting of cycle aging and calendar aging that are caused by the operation frequency and over time, respectively. A lightweight RUL estimation model is required to be embedded in low-performance processors that are installed on ESS. In this paper, a lightweight ESS RUL estimation model is proposed to operate on low-performance micro-processors. The simulation results show less than 1% errors compared to the original RUL model case. In addition, a performance analysis is conducted based on ATmega 328. The results show 76.8 to 78.3 % of computational time reduction.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.457-463
• /
• 2015

A gas turbine engine plays an important role as a prime mover that is used in the marine transportation field as well as the space/aviation and power plant fields. However, it has a complicated structure and there is a time delay element in the combustion process. Therefore, an elaborate mathematical model needs to be developed to control a gas turbine engine. In this study, a modeling technique for a gas generator, a PLA actuator, and a metering valve, which are major components of a gas turbine engine, is explained. In addition, sub-models are obtained at several operating points in a steady state based on the trial running data of a gas turbine engine, and a method for controlling the engine speed is proposed by designing an NPID controller for each sub-model. The proposed NPID controller uses three kinds of gains that are implemented with a nonlinear function. The parameters of the NPID controller are tuned using real-coded genetic algorithms in terms of minimizing the objective function. The validity of the proposed method is examined by applying to a gas turbine engine and by conducting a simulation.

• Journal of Navigation and Port Research
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2018

This study was carried out to analyze the risk attitude based on situation awareness of the Vessel Traffic Service Operator (VTSO) on the risk of collision between vessels during the monitoring of vessel traffic through the use of the VTS system. In general, when two vessels are in the close quarters situation, we analyzed the degree of risk of collision from the subjective viewpoint of the VTSOs through an administered survey. Chiefly, we analyzed the risk attitudes of each VTSO in the close quarters situation, by comparing it with the calculated value by the CoRi, which is the ship collision risk model from the VTSO's viewpoint. As a result, it was confirmed that more than 40% of the total VTSO was noted as being in a weak risk aversion type of category. Through a review of the results of analyzing the risk attitude of VTSO according to gender, age, VTS career, VTS center position, accident experience, and boarded career, it was found that there was a significant difference in the VTS career, VTS center position and accident experience. In addition, a regression model that is able to further explain the risk attitude of VTSO was derived as a factor that confirmed the significant difference and applied to CoRi to predict the collision risk according to the individual VTSO to be used as a fundamental information gathering tool for providing more accurate and safe VTS service at sea.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.545-558
• /
• 2003

It is expected that per-user customized services are widely used in next generation Personal Communication Network. The ultimate goal for personalized service is the Virtual home Environment (VHE) providing ´same-look-and-feel´ services for the subscriber wherever he roams to. To provide personalized services for each call, per-user service profiles are frequently referenced, so efficient service profile management is essentially required. To realized the VHE, typically two schemes, can be employed; One is Intelligent Network based service control and the other is a full replication scheme that always replicates profile in user´s current zone. The first scheme is referred as Central scheme and th second scheme is the modified replication scheme of IMT-2000, we refer to as Follow-Me Replication Unconditional (FMRU). Since the Central scheme only depends on the service cal rate and the FMRU is merely dependent on the movement rate, it is apparent that FMRU scheme outperforms the Central scheme if the call to mobility ratio (CMR) is large, and vice versa. In this paper, we propose a new service profile replication schemes, Adaptive Follow-Me Replication (AFMR) that determine replication automatically according to the user´s CMR. We compared the performance of the AFMR with the non-adaptive Follow-Me Replication unconditional on Demand (FMRUD) scheme. Performance results indicate that as the CMR of a user changes AFMR adapts well compared to the existing schemes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.583-589
• /
• 2002

The Internet is absolutely contributed to information telecommunication revolution nowadays. Realizing local network at the various type of buildings such as a company and a university, ethernet is used for subnet and FDDI, ATM are used for backbone mainly in order to get internet services. Processing TCP/IP protocol suite and analyzing the protocol exactly is essential to detecting the problem occurring in the network and developing communication equipment. This paper presents implementation of ethernet LAN protocol analyser which monitors and simulates ICP/IP protocol suite carrying the Internet and non-Internet protocol such as Netware and NetBIOS. MS window98 and visual C are used for development environment and application program operates on the NDIS firmware. The performance analysis on the proposed system is carried out as monitoring and simulating the traffic over LAN of a university. In the result of monitoring the system, the processing time of a packet captured over the LAN is about 1.5ms. In case of simulating the system, the processing time to be taken carrying out TCP connection and disconnection once is packet is about 8.6ms. The performance analysis of monitoring and simulation results satisfies with 10 Mbps ethernet LAN environment.