• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.391-396
• /
• 2010

In this research the characteristics of ammonia removal from malodorous waste-air were investigated under various operating condition of biofiilter packed with equal volume of rubber media and compost for the efficient removal of ammonia, representative source of malodor frequently generated at compost manufacturing factory and publicly owned facilities. Then the optimum conditions were constructed to treat waste-air containing ammonia with biofilter. Biofilter was run for 30 days(experimental frequency of 2 times/day makes 60 experimental times.) with the ammonia loading from $2.18g-N/m^3/h$ to $70g-N/m^3/h$ at $30^{\circ}C$. The ammonia removal efficiency reached almost 100% for I through IV stage of run to degrade up to the ammonia loading of $17g-N/m^3/h$. However the removal efficiency dropped to 80% when ammonia loading increased to $35g-N/m^3/h$, which makes the elimination capacity of ammonia $28g-N/m^3/h$ for V stage of run. However, the removal efficiency remained 80% and the maximum elimination capacity reached $55g-N/m^3/h$ when ammonia loading was doubled $70g-N/m^3/h$ for VI stage of run. Thus the maximum elimination capacity exceeded $1,200g-N/m^3/day$(i.e., $50g-N/m^3/h$) of the experiment of biofilter packed with rock wool inoculated with night soil sludge by Kim et al.. However, the critical loading did not exceed $810g-N/m^3/day$ (i.e., $33.75g-N/m^3/h$) of the biofilter experiment by Kim et al.. The reason to exceed the maximum elimination capacity of Kim et al. may be attributed to that the rubber media used as biofilter packing material provide the better environment for the fixation of nitrifying and denitrification bacteria to its surface coated with coconut based-activated carbon powder and well-developed inner-pores, respectively.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2018

This study was aimed at predicting the yield of paprika (Capsicum annuum L.) through analyzing the growth characteristics, yield pattern and greenhouse environment. In the greenhouse of the Gyeongnam area (667 m above sea level), the red paprika 'Cupra' and the yellow paprika 'Fiesta' were grown from July 5, 2016 to July 15, 2017. The planting density was $3.66plants/m^2$ and attracted 2 stems. During the cultivation period, the average external radiation of the glasshouse was $14.36MJ/m^2/day$ and the internal average temperature was controlled as $20.1^{\circ}C$. After 42 weeks of planting, the growth rate of 'Cupra' was 7.3 cm/week and that of 'Fiesta' was 6.9 cm/week. The first fruit setting of 'Cupra' appeared at 1.0th node and 'Fiesta' at 2.7th node. The first harvest of 'Fiesta' was 11 weeks after planting and 'Fiesta' was 14 weeks. Comparing the yield per 10 a until the end of the cultivation in July, 'Fiesta' was 19,307 kg, which was 2.4% higher than that of 'Cupra'. And the fruit weight ratio of over 200 g of 'Cupra' was 27.7% which was 7.7% higher than that of 'Fiesta'. The average required days to harvest after fruit setting of 'Cupra' was 72.6 days and 'Fiesta' was 63.8 days. According to the relationship between the average required days to harvest and the cumulative radiation (during from fruit setting to harvest), the more radiation increases the less required days to harvest increases after February. In terms of yield, 'Cupra' increased in yield as the cumulative radiation increased, while 'Fiesta' showed an irregular pattern. Cumulative radiation from fruit setting to harvest was negatively correlated with required days to harvest after February in both cultivars. But in relation to yield, there were difference between 'Cupra' and 'Fiesta'.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.83-88
• /
• 2005

A study was conducted on three pollination methods on oriental melon(sageageol-ggul) grafting with pumpkin(seongjutozoa) for the labor-saving and to improve fruit set. Fruit weight, flesh thickness and fruit setting rate of oriental melon were greater in growth regulators treatment than those of pollinated by bees. Sugar content and hardness of fruits pollinated by bees were higher than those of by growth regulators. From the last ten days of the February to the first ten days of the March, fruit setting rate was $95\%$ in fruit setting growth regulators, whereas it was $46\%$ and $45\%$ in pollinated by honey and bumble bee, respectively. After the middle of March, the percentage of fruit setting was >$98\%$ in all the pollination methods. The cultivation under plastic houses of oriental melon, suitable fruiting time far the pollination by bees was decided after middle days of the March. Chromaticity and especially the value of 'a' of fruit of oriental melon pollinated by bees were higher than those of growth regulators. The percentage of fermented fruits of bee pollinated and growth regulators treated was $6.7\~9.1\%\;and\;28.1\%$, respectively. The weight of 100 seeds of bees pollinated were higher than that of growth regulators. The more increased the weight of 100 seeds the less appeared the rate of fermented fruits. The percentage of marketable fruits of the honey and bumble bee pollinated and that of growth regulators treated was $82\%,\;80.3\%\;and\;62.5\%$, respectively. The decreasing rate of fruit weight during storage of bees pollinated was less than those of growth regulators. In these results, the introduction of honey bee and bumble bee for the pollination of oriental melon was able to labor-saving of fruit set and increase of fruit quality.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.