• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.28-38
• /
• 1981

A survey has been conducted to investigate the presents of breaks down and repair of power tiller for efficient use. Eight provinces were covered for this study. The results are summarized as follows. A. Frequency of breaks down. 1) Power tiller was breaken down 9.05 times a year and it represents a break down every 39.1 hours of use. High frequency of breaks down was found from the fuel and ignition system. For only these system, the number of breaks down were 2.02 and it represents 23.3% among total breaks down. It was followed by attachments, cylinder system, and traction device. 2) For the power tiller which was more than six years old, breaks down accured 37.7 hours of use and every 38.6 hours for the power tiller which was purchased in less than 2 years. 3) For the kerosene engine power tiller, breaks down occured every 36.8 hours of use, which is a higher value compared with diesel engine power tiller which break down every 42.8 hours of use. The 8HP kerosene engine power tiller showed higher frequency of break down compared with any other horse power tiller. 4) In October, the lowest frequency of break down was found with the value of once for every 51.5 hours of use, and it was followed by the frequency of break down in June. The more hours of use, the less breaks down was found. E. Repair place 1) 45.3% among total breaks down of power tiller was repaired by the owner, and 54.7% was repaired at repair shop. More power tiller were repaired at repair shop than by owner of power tiller. 2) The older the power tiller is, the higher percentage of repairing at the repair shop was found compared with the repairing by the owner. 3) Higher percentage of repairing by the owner was found for the diesel engine power tiller compared with the kerosene engine power tiller. It was 10 HP power tiller for the kerosene power tiller and 8 HP for the diesel engine power tiller. 4) 66.7% among total breaks down of steering device was repaired by the owner. It was the highest value compared with the percentage of repairing of any other parts of power tiller. The lowest percentage of repairing by owner was found for the attachments to the power tiller with the value of 26.5%. C. Cause of break down 1) Among the total breaks down of power tiller, 57.2% is caused by the old parts of power tiller with the value of 5.18 times break down a year and 34.7% was caused by the poor maintenance and over loading. 2) For the power tiller which was purchased in less than two years, more breaks down were caused by poor maintenance in comparison to the old parts of power tiller. 3) For the both 8-10 HP kerosene and diesel engine power tiller, the aspects of breaks down was almost the same. But for the 5 HP power tiller, more breaks down was caused by over loading in comparison to the old parts of power tiller. 4) For the cylinder system and traction device, most of the breaks down was caused by the old parts and for the fuel and ignition system, breaks down was caused mainly by the poor maintenance. D. Repair Cost 1) For each power tiller, repair cost was 34,509 won a year and it was 97 won for one hoar operation. 2) Repair cost of kerosene engine power tiller was 40,697 won a year, and it use 28,320 won for a diesel engine power tiller. 3) Average repair cost for one hour operation of kerosene engine power tiller was 103 won, and 86 won for a diesel engine power tiller. No differences were found between the horse power of engines. 4) Annual repair cost of cylinder system was 13,036 won which is the highest one compared with the repair cost of any other parts 362 won a year was required to repair the steering device, and it was the least among repair cost of parts. 5) Average cost for repairing the power tiller one time was 3,183 won. It was 10,598 won for a cylinder system and 1,006 won for a steering device of power tiller. E. Time requirement for repairing by owner. 1) Average time requirements for repairing the break down of a power tiller by owner himself was 8.36 hours, power tiller could not be used for operation for 93.58 hours a year due to the break down. 2) 21.3 hours were required for repairing by owner himself the break down of a power tiller which was more than 6 years old. This value is the highest one compared with the repairing time of power tiller which were purchased in different years. Due to the break down of the power tiller, it could not be used for operation annually 127.13 hours. 3) 10.66 hours were required for repairing by the owner himself a break down of a diesel engine power tiller and 6.48 hours for kerosene engine power tiller could not be used annually 99.14 hours for operation due to the break down and it was 88.67 hour for the diesel engine power tiller. 4) For both diesel and kerosene engine power tiller 8 HP power tiller required the least time for repairing by owner himself a break down compared with any other horse power tiller. It was 2.78 hours for kerosene engine power tiller and 8.25 hours fur diesel engine power tiller. 5) For the cylinder system of power tiller 32.02 hours were required for repairing a break down by the owner himself. Power tiller could not be used 39.30 hours a year due to the break down of the cylinder system.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.12a
• /
• pp.52.1-52
• /
• 2000

고분자 물질 용액에 감자 절편을 침지시의 탈수현상을 설명하기 위해 (1) 비정상 상태(unsteady state)에서의 확산 식을 초기시간에 대해 단순화시킨 모델, (2) 침지시간별로 수분확산계수와 평균확산계수를 비교하여 탈수현상을 설명하고자 한 모델, (3) 물질이동에 대한 Fick의 제2법칙을 무한평판의 조건에서 전체시간에 대해 전개한 모델 등 3가지 모델을 가정하여 검토한 결과 PEG용액에 감자절편을 침지했을 때 물질이동의 동력학적인 해석은 Fick의 제2법칙에 근거한 모델이 잘 적용되었으며 수분의 확산계수를 추정한 결과 8$\times$$10^{-7}$~4$\times$$10^{-6}$$cm^2$/s 범위였다.위였다.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.229-235
• /
• 2019

In this study, a two-dimensional oscillating foil with forward speed in a propagating wave flow field was considered. The time-mean power to maintain the heaving and pitching motions of the foil was analyzed using the perturbation theory in an ideal fluid. The power, which was a non-linear quantity of the second-order, was expressed in terms of the quadratic transfer functions related to the mutual product of the heaving and pitching motions and incoming vertical flow. The effects of the pivot point and phase difference among the disturbances were studied. The negative power, which indicates energy extraction from the fluid, is shown as an example calculation.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.5
• /
• pp.477-482
• /
• 2000

For the purpose of explaining the dewatering phenomena of potato slice soaked in concentrated solution three models were proposed. Earlier model cannot explain the dewatering phenomena of potato slice in concentrated solution because of limiting its condition which is necessary to build a model. Therefore other three models were suggested and a model based on Fick\`s second law of mass transport at infinite plate conditions and numerical analysis was test model for explaining dewatering phenomena of potato soaked in concentrated solution. Apparent diffusion coefficient of water could be readily estimated from model III, and it could explain adequately the difference of the dewatering phenomena of various soaking conditions.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.13-19
• /
• 2015

The wood pellet is standardized of woody type fuel which of small cylindrical shape that is produced compress wood remnants in process of woody processing. The pellet is critical energy which expects to increase of the amount used in future. It consumes fuel which of home, common facilities stove and boiler, district heating, and CHP, etc. This study was to develop a movable pellet manufacturing equipment that can be mounted on a truck. The pellet production volume is approximately 309kg per hour, daily output is about 2ton. One days work based on the expected revenue of approximately \268,000 feasibility is considered sufficient.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1994.02a
• /
• pp.449-456
• /
• 1994

넓은 지역(Arkansas River Basin)에 대하여 토양 수분을 기본으로한 물 수지 모델이 계절별 년별 시간단위로 연구되었다. 지표면과 대기 수분사이의 상호 작용과 재순환 효과에 대한 연구가 유역의 매개 변수화 과정에서 수행되었으며 대규모의 지표면과 대기사이의 상호 작용에 의하여 넓은 지역의 지표 수문은 장기간의 확률분포함수에 있어서 두가지 즉 건조와 습한 안정상태의 영향을 받는다. 토양수분 균형 방정식에서 추계학적 변동은 주위환경 변동에 의하여 야기되는 안정상태 사이의 변이와 함께 분리된 선호하는 통계학적 안정상태를 초래한다. 과거의 자료를 바탕으로 비선형 물수지 모델이 Arkansas강 유역에 대하여 검정되었다. 모델에서 안정상태 사이의 평균 변이시간이 물리과정의 추계학적 표현과 검정된 모델변수들로부터 계산되었다. 본 연구는 안정상태 사이의 변이시간 혹은 거주시간, 즉 시스템이 주어진 안정상태에 머무는 시간(가뭄이나 홍수상태의 지속기간)의 예측과 밀접한 관계가 있다.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.61-69
• /
• 1997

본 연구는 동심환형관에서 거칠기가 없이 매끈한 경우, 내측벽에 만, 외측벽에 만, 그리고 양측 모두에 거칠기가 있는 4경우에 대해 직경비가 0.26, 0.39, 그리고 0.56일 때 벽면에 설치된 거칠기 위치들이 난류유동장에 미치는 효과를 실험적으로 조사하고자 한다. 최대속도와 전단응력이 0인 지점들, 시간평균속도의 구배들, 그리고 와확산계수들을 X형 열선풍속계와 이중 피토튜브를 사용하여 측정하였다. 본 연구를 통하여 동심환형관에 설치된 거칠기들이 난류유동에 미치는 효과에 대한 정량적자료를 제시할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1004-1010
• /
• 1998

Effects of reaction conditions such as power input and feeding time and feeding mode of reactants on the reaction crystallization of lanthanum oxalate in semi-batch reactor were investigated experimentally. Even though the crystal size distribution of lanthanum oxalate was always monomodal, its mean crystal size was significantly varied with the reaction conditions. As the power input and reactant feeding rate increased, the mean crystal size was reduced and the relative induction time was prolonged. The mean crystal size produced in oxalic acid feeding mode was smaller than that in lanthanum chloride feeding mode, but the trend of the relative induction time with the feeding mode was reverse to that of the mean crystal size. The crystal morphology of lanthanum oxalate, which was produced within the ranges of the reaction conditions in our experiment, was maintained as a needle shape.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.448-448
• /
• 2023

도심 속 하천과 그 주변 지역(이하 수변)은 물과 자연환경이 주는 정서적 안정감과 쾌적함, 그리고 건강성을 대표하는 공간으로 도심 속 쉼터이자 힐링의 장소이다. 최근 수변이 도시경관의 질향상, 휴식 및 여가 공간 제공의 기능뿐만 아니라 열섬효과 완화 등 기후변화 대응에 효과가 있다는 사실도 재조명되면서, 수변이 도시의 발전과 활성화를 이끌어낼 새로운 동력이자 대안으로 급부상하고 있다. 본 연구에서는 서울의 4대 권역하천인 중랑천, 탄천, 안양천, 홍제천을 대상으로 하천과 하천 주변 500m 이내 구역을 하천공간과 수변공간으로 구분하고, 그 현황과 특성을 분석하였다. 하천(제방)으로부터 50m 이내 수변공간에 위치한 도로면적의 비율은 탄천이 40%로 가장 높았으며, 그 외에도 중랑천은 31%, 홍제천과 안양천은 28%로 하천변 도로면적비가 매우 높은 것으로 분석되었다. 특히, 중랑천은 하천공간 내 도로면적이 하천변 50m 이내에 위치한 도로의 면적과 비슷한 수준으로 나타났다.안양천, 중랑천, 탄천 대부분의 구간에서는 친수활동을 하기엔 다소 수심이 낮고(0.3m 이하) 유속이 느린 것(0.3m/s 이하)으로 분석되었고, 수질은 대부분의 구간에서 대장균 군수가 기준치를 수십에서 수백 배 초과하고 있어, 최상류 일부 구간을 제외한 전 구간에서 수영·물놀이 등 수상활동이 부적합한 것으로 분석되었다. 서울시민들은 주로 금요일과 토요일, 오후 12시에서 18시 사이에 하천을 가장 많이 방문하며 평균 2시간 정도를 머물렀으며, 대부분 걷기와 산책 활동을 하는 것으로 조사되었다. 도보, 대중교통 등 교통수단에 따른 하천진출입로 인근평균인구 대비 접근 가능 인구비율을 산출하여 접근성을 분석한 결과, 중랑천과 홍제천에서는 수변지역 내 평균인구의 20~30%가 도보 및 대중교통으로 20~30분 이내에 도달 가능한 것으로 분석되어 접근성이 가장 우수하였고, 안양천은 수변지역 내 평균인구의 15~20%가 30분 이내 도달가능하였으며, 탄천은 수변지역 내 평균인구의 10%미만이 30분 내에 도달가능한 것으로 분석되어 탄천의 접근성이 가장 열악한 것으로 나타났다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.248-253
• /
• 2002

가. 대형 원형베일의 볏짚을 절단하여 축사의 사조나 TMR제조기에 공급하는 원형베일쵸퍼를 개발하였다. 나. 시작기의 적정작업속도는 PTO 500rpm 수준이었으며 이때 작업능율은 964kg/시간, 평균볏짚절단길이는 13.9 cm이었다. 다. 시작기의 소요동력은 PTO회전수가 300rpm에서 600rpm으로 높아짐에 따라 증가하였으며 PTO회전수 500rpm 일 때 축 토크는 38.4kgf·m 수준이었다. 라. 비육우 50두 규모에서 시작기는 관행(볏짚절단기)에 비하여 노력절감 92%, 작업비용 26.%절감으로 나타나 실용성이 있는 것으로 나타났다. 마. 볏짚의 허실율만을 고려한 손익분기급이량은 106톤/년으로 나타나 대규모의 전업 낙농 농가나 비육우 농가 또는 여러농가에서 공동 사용할 경우에 경제성이 있는 것으로 나타났다.