• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.4 no.4
• /
• pp.68-78
• /
• 1990

절연파괴의 원인이 되는 절연체중의 공간전하의 여러 특성을 정량적으로 측정하였다. 전극에서의 주입전하가 트랩되어 주로 공간전하를 형성하는 것을 확인하였다. TSSP측정법으로 컬렉팅 전위를 결정하고 바이어스의 시간, 전압, 온도에 따른 공간전하 변화량을 측정하여 공간적 분포의 깊이를 조사하였다. 그리고 정상상태에 있어서 모델과 해석과 시험 결과가 비교적 잘 일치함을 발견하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.5-8
• /
• 2011

3차원 멀티코어 프로세서는 기존의 멀티코어 프로세서에서 문제가 되던 연결망 지연시간과 전력문제를 해결할 수 있는 새로운 프로세서 설계기술이다. 하지만, 전력밀도의 증가로 인해 발생하는 열섬현상은 3차원 멀티코어 프로세서의 새로운 문제점으로 두드러지고 있다. 이러한 문제를 해결하기 위해서 동적 온도 관리 기법이 사용되지만, 동적 온도 관리 기법을 적용하면 시스템에 성능 저하가 발생하게 된다. 따라서 본 논문에서는 3차원 멀티코어 프로세서에서 문제가 되는 열섬현상을 해결하기 위해 고온의 유닛을 대상으로 동적 온도 관리 기법을 적용하고자 한다. 실험대상으로는 시스템 성능에 많은 영향을 미치고 높은 접근 때문에 고온이 발생하는 TLB 유닛을 사용하고자 한다. 특히, 시스템의 성능 저하를 줄이기 위해서 기존의 시스템보다 낮은 성능을 보이는 마이크로 TLB 구조를 적용해 보고자 한다. 성능이 낮은 구조의 경우 일반적으로 더 낮은 온도 분포를 보이며 동적 온도 관리 기법에 영향을 덜 받기 때문에 동적 온도 관리 기법만 적용한 구조보다 더 낮은 성능 저하를 보일 수 있다. 실험결과 동적 온도 관리 기법을 적용한 경우 기존의 시스템에 비해 23.4%의 성능 저하가 발생하고 마이크로 TLB 구조를 적용한 경우 27.1%의 성능 저하가 발생함을 알 수 있다.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.142-151
• /
• 2002

Claesson(2001)'s analytical solution, and two numerical models with Dirichlet and Neuman interior boundary condition respectively were investigated to estimate the transient temperature distribution with distances from the Taejon underground food cold storage pilot cavern. Claesson's solution, which is based on constant temperature boundary condition at the rock wall during a temperature decline step, showed relatively good agreement with temperature measurements in the rock mass in order of average error difference, 0.89$\^{C}$ without any adjustments on laboratory thermal properties to represent the rock mass. For the numerical model with heat flux through the rock wall, a boundary condition setting technique was newly proposed to overcome the difficulty of prescribing variable convective heat tranfer coefficient and far-field air temperature inside the cavern as they may be certainly changed according to the cooling-down time. The results showed also good agreement with measurements in order of average error difference, 1.58$\^{C}$, and were compared to those of the numerical model with fixed temperature at the rock wall. Finally, the most proper procedure to precisely predict the temperature profile around a cavern was proposed as a series of analysis steps including an analytical exact solution and numerical models.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.55-67
• /
• 2013

This study focused on analysis condition and application method of the passive infrared thermography according to the direction and time to nondestructively detect the blistering zone of stone cultural heritage. As a result, the passive thermographic images showed different temperature characteristics by time because it sensitively reacts to air temperature, insolation and sunshine direction. In particular, the insolation and sunshine direction, which are periodically changed from 6:00 to 17:00, irregularly made surface temperature. In addition, surface temperature differences were brought on fresh zones and blistering zones except specific time since blistering causes erratic thermal transfer. As a result of examining the detection characteristics of blistering by time, the blistering was well detected between 9:00 and 10:00 when there was rapid increase in air temperature and insolation in all direction except the north. However, this study isn't considered effects of four seasons because it is carried out in autumn, and the passive thermography has difficulty to analyze the quantitative area of blistering zone. Therefore, an additional study for synthetic consideration of the passive thermography analysis about four seasons and quantitative modeling of blistering zone using the active thermography are needed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.15-22
• /
• 1980

Alkali digestion value of rice kernels was increased with delayed planting date and decreased with temperature during ripening. Varietal difference in average digestion value between low and high groups of rice varieties was the greatest under the conditions of 1.4 percent solution of potassium hydroxide, early planting and day/night temperature of 30/22$^{\circ}C$ Segregation ratio of alkali digestion value in $F_2$ generation was varied with crosses showing 3:1 for nine crosses, 1:3 for one cross, 9:7 and 13:3 for two crosses respectively and non-segregation for one cross of 15 crosses between low and high varieties in the digestion value.

• Journal of the Korean Ceramic Society
• /
• v.37 no.10
• /
• pp.938-943
• /
• 2000

TiCl$_4$, 물 및 1-propanol의 혼합용액으로부터 미립 TiO$_2$분말 제조시, 1-propanol과 물의 부피비, 반응온도, 반응유지시간 및 TiCl$_4$mole 농도에 따른 분말 특성 및 결정상 생성에 대해 조사하였다. 반응온도가 3$0^{\circ}C$ 이상일 때 Ti 수화물의 초기 침전이 생성되었고 반응온도가 TiCl$_4$mole 농도가 증가함에 따라 입자크기는 증가하였고 $600^{\circ}C$ 하소시 1-propanol과 물의 부피비가 2보다 크고 반응온도가 7$0^{\circ}C$보다 낮을 때 주결정상은 anatase였다. 입자크기가 미세하고 입자크기 분포가 좁은 범위를 갖는 조건은 1-propanol과 물의 부피비가 2, 반응온도가 7$0^{\circ}C$, TiCl$_4$mole 농도가 0.2 mole/ι일 때였으며, 결정상의 생성은 1-propanol과 물의 부피비가 2, 반응온도가 3$0^{\circ}C$ 이상일 때 anatase에서 rutile로 전이하는 온도가 높아졌다. 이와 같은 반응인자에 따른 효과는 용매의 유전상수, 티타니아의 용해도, 입자의 표면전위 등의 효과와 관계가 있었다.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.357-366
• /
• 2007

This paper is a pilot study regarding an experimental and parametric study to investigate the structural behavior of slimfloor beam(ASB) in fire. The objective of this research is to obtain the rational fire resistance design method through understanding the structural behavior of composite members in fire. The flexural capacity of slimfloor section under various thermal conditions is examined on a basis of the strength retention of the materials at elevated temperatures and full bonding assumption. The effect of web thickness and ASB depth to the moment capacity in fire is also examined.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.23-29
• /
• 2003

The prevalence of discogenic pain among patients with chronic low back pain is estimated to be about 40%. Lumbar discectomy is being performed as a treatment according to the studies done so far. Recently IDET- Intradiscal electrothermal therapy which is minimally invasive technique is being introduced. This study will investigate important factors of this procedure such as the temperature of heat source, loading times, and the temperature distribution within the intervertebral disc. This study utilized finite element analysis and experiment. It was able to analyze the temperature range of inner intervertebral disc by two mechanisms which are known to alleviate pain clinically. As a result, verification of temperature distribution to 15.6mm($\geq$45$^{\circ}C$) (Mechanism 1-coagulation inner annulus by heat) and 9mm($\geq$6$0^{\circ}C$) (Mechanism 2- contraction inner nucleus by heat) from the heat source was done.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.169-176
• /
• 2005

The decreasing pattern of underground temperature measured at 'Gonjiam cold storage cavern' during 7 years which was the first commercial scale underground food storage cavern in Korea was analyzed. The variation of energy consumption was discussed by comparing the consumed energy at the initial operation stage with that at later stage, when the temperature distribution reached a stabilized condition. The point to be considered at the design stage was also discussed by comparing the required refrigerator capacity at the initial operation stage with that at later stage. The extra energy to freeze the groundwater contained in pore space was discussed by analyzing the changing pattern of the rock temperature. The variation of measured rock temperature was compared with the estimated temperature using a numerical code, FLAC. The accuracy of the numerical estimation was discussed by comparing the heat flux measured by the operation time of the refrigerator with that estimated numerically.