• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.37-43
• /
• 2003

The influence factors for char yield in the carbonization process of natural cellulose are the carbonization temperature, the heating rate and the atmosphere in the furnace. In general, it is well known that the improvement of char yield is expected under the conditions of the lower carbonization temperature, the slower heating rate and the presence of inert gas in the furnace. In this study, it has been investigated the effect of the heating rate control with sulfuric acid as a dehydrating agent for the improvement of char yield in the carbonization process of natural cellulose. The cellulose treated with sulfuric acid has shown the weak dependency of heating rate in char yield, whereas the untreated cellulose has shown the strong dependency. These findings clearly suggest that it can be useful to control heating rate with appropriate dehydrating agent in the carbonization process to improve the char yield and shortening the carbonization time.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.212-217
• /
• 1996

방사속도를 500~5,500 m/min까지 변화시켜 만든 Poly(Ethylene 2,6-Naphthalenedicarboxylate)(PEN) 섬유의 Morphology 및 결정화거동을 DSC, XRD 및 Synchrotron Radiation을 이용하여 조사하였다. 밀도 및 복굴절률을 측정하여 방사속도가 증가함에 따라서 as-spun fiber의 구조를 살펴보았다. 또 DSC의 1차 승온과정으로부터 미연신사의 승온결정화 개시온도를 관찰하였으며 ㅡㅇ온결정화과정으로부터 결정화속도를 측정하였다. XRD 및 광가속도기를 이용하여 방사속도에 따른 섬유의 미세구조를 관찰하였으며 온도가 올라감에 따라 결정형태 및 결정화거동이 어떻게 달라지는지 확인하였다.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.345-356
• /
• 1995

본 연구에서는 TiAl 금속간 화합물을 자전 고온 반응법을 이용하여 제조시 반응과정을 열시차 분석 방법으로 분석하였다. 합금 조성은 Ti-45at% Al, 53at%Al, 알루미늄 분말 크기, 승온 속도, 성형 밀도 등을 변화시켜 이들이 반응 과정에 미치는 영향을 관찰하였다. 분말이 미세할수록, 승온속도가 느릴수록, 성형 밀도가 낮을수록 반응 점화 온도 및 연소 온도가 감소하였으며, 고상 Ti와 고상 Al간의 반응정도가 증가하는 것이 관찰되었다. 고상 Ti와 고상 Al간의 반응에서 생성되는 것은 XRD 분석 결과 Ti$Al_{3}$상으로 확인되었다. 이에 비하여 반응 점화 온도가 알루미늄의 용융 온도보가 높을 경우에는 생성되는 상이 $Ti_{3}$Al, TiAl상으로 확인되었다. 이러한 상의 생성 원인에 대하여 확산 계수 및 알루미늄의 용해도등의 요인으로 설명하였다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.04c
• /
• pp.24-24
• /
• 1994

• Resources Recycling
• /
• v.26 no.6
• /
• pp.45-49
• /
• 2017

Most Waste slurry is produced in the process of silicon manufacturing for semiconductor industry, containing silicon (Si) and silicon carbide (SiC). Waste slurry is simply stored with solidifying by cement or buried. On the other hand, it was suggested in this study that the waste slurry should be used for heating source as supplementary material in steel making process. The waste slurry was refined and pulverized, which was recycled into SiC-based sludge briquette. Chemical composition for SiC-based sludge briquette was analyzed and the feature of heating source was observed in accordance with the injection time and input amount. As a result, SiC-based sludge briquette in terms of low cost and high efficiency had an effect on increasing liquid steel temperature in steel making plants.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.113-124
• /
• 1993

Thermogravimetric analysis of copolymer of acrylonitrile(95%) and methyl acrylate(5%) have been carried out to investigate the activation under $H_2O$(30%) -$N_2$atmosphere at various heating rates. The kinetic equation [$f=1-\exp(-a{\Delta}T)^b$] which was derived on the basis of the nonisothermal activation process of carbon fiber in the $H_2O$(30%)-$N_2$system showed good agreement with experimetal results. The pore volume upon conversion was in good agreement with the model of theoretical pore volume. The pore structures of the activated carbon fiber were influenced by the heating rate, activation temperature and internal-external conversions.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.104-108
• /
• 2001

Naphthalene derived mesophase pitch WP) was spun into short fibers by using melt-blown technology. The pitch fibers oxidative stabilization were carried out heating rates of $2^{\circ}C/min,\;5^{\circ}C/min\;and\; 10^{\circ}/min$. The heating rate was a key factor to maximate the capacity of the Li-ion secondary battery through controlling the morphology of the graphitized fiber. The diameters of the melt-blown fibers prepared were in the range of $4{\mu}m\~16{\mu}m$ with functions of air jet speed, air temperature and the temperature of the nozzle. The graphitized fibers of $10{\mu}m$ diameters showed various morphological structure with heating rate of the stabilization. Radial, radial-random and skin-core cross-sectional structure of the fibers were observed at the respective heating rate of $2^{\circ}C/min\;5^{\circ}C/min\;and\;10^{\circ}C/min$. Most crystalline structure of graphite was obtained from the fiber stabilized at heating rate of $10^{\circ}C/min$ exhibiting the best anode performance with 400 mAh/g of capacitance and $96.8\%$ of charge/discharge efficiency.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.147-154
• /
• 1991

Thermogravimetric measurements have been carried out to investigate the stabilization and carbonization of copolymer of acrylonitrile(95 wt %) and methyl acrylate(5 wt %) at various heating rates. The cyclization and dehydrogenation during the stabilization were important factors to determine pore development in the carbonization process. The pore and the specific surface area during the carbonization began to develope at the temperature higher than $400^{\circ}C$.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.279-282
• /
• 2001

Oxi-PAN(Oxidized PAN, Oxi-PAN)섬유는 PAN 섬유를 1-2$^{\circ}C$/min정도의 승온 속도로 180-30$0^{\circ}C$ 정도의 저온, 산화 분위기에서 인장력을 가한 상태로 열처리하여 얻는 섬유이며, 이 열처리 과정 중에 PAN 섬유의 분자쇄에서는 Cyclization, Dehydrogenation 및 산화 반응이 일어나게 된다. 이렇게 제조된 Oxi-PAN 섬유는 탄소섬유의 프리컷(Precursor)로 사용되기도 하고 또한 열안정성이 뛰어나 내염화섬유용으로 사용되기도 한다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1020-1026
• /
• 1990

The effect of heating rate on the microstructural evolution during sintering of PZT ceramics has been investigated. In case of PZT powder compacts containing excess of PbO, fast heating caused incomplete rearrangement of solid grains in a liquid, resulting in lower density and inhomogeneous pore shape ; on contrary, slow heating resulted in better densification. In contrast, in case of compacts without excess PbO, the densification was enhanced by fast heating due to suppression of the grain growth.