• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.61-61
• /
• 2011

비스코스 레이온(Viscose Rayon)은 목재 펄프를 원료로 한 재생섬유로서 은은한 광택과 발색성, 흡습성 등의 기능 뿐만 아니라, 천연섬유에 찾을 수 없는 Numeri감(Smoothness), Drape(처짐)성, 반발탄성을 가지고 있는 지극히 친환경적이며 자연순환형 소재로 인식, 지구온난화에 따른 CoolBiz Look 패션소재인 레이온 소재에 관심이 증대되고 있다. 한편, 레이온 소재는 수분흡수 시 강도저하, 수축과 구김, 염색 불균염 등의 문제점과 섬유공정상 생활취급상에 많은 애로를 가지고 있으며, 구성고분자가 수소결합에 의해 강고하여 "신축문제", 수분흡수시 팽윤(Swelling)에 의한 형태불안, 즉 "수축문제"가 개선해야 할 고질적 문제로 남아 있다. 또한, 습식방사에 따른 분자구조적 불안정성으로 건 습열처리시 형태불안정(치수변화율이 큼)으로 제직(준비) 및 후공정상 여러 가지 Trouble 유발과 완제품 세탁시 수축발생으로 종종 Dry Creanning해야 하는 문제점들이 내재되어 있다. 따라서 본 연구에서는 레이온 소재의 형태안정화 제품을 개발하기 위하여 복합사가공 및 염색가공 기술을 개발하고자 하며, 신축 및 복합기술에 의한 Rayon DTY, T/R 신축 및 복합기술에 의한 Rayon DTY, T/R 복합가공사를 개발, 제편직 요소기술과 최적의 전처리 조건, 다양한 염료의 종류, 염색온도 조건 등에 관한 연구를 진행하였다.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.127-132
• /
• 2019

This study investigated the quality of Jeungpyun based on variety, milling method and fermentation time. Rice flour (wet-milled Samkwang and dry-milled Seolgaeng) was used for these experiments. The expansion ratios of wet-milled Samkwang and dry-milled Seolgaeng after 6 h of fermentation showed similar values of 160.66 and 159.52%, respectively, while the specific volume was found to be 1.12 mL/g for both. Hardness values of 475.57 g in dry-milled Seolgaeng and 550.40 g in wet-milled Samkwang were determined to be the lowest values after 6 h of fermentation. Numerous pores were found in wet-milled Samkwang, whereas large-sized pores were found in dry-milled Seolgaeng. Thus, these results show no significant difference between the quality of Jeungpyun produced using dry-milled Seolgaeng or wet-milled Samkwang rice flours. However, dry- milled Seolgaeng without the wet-milled process is considered more suitable for Jeungpyun production.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.657-661
• /
• 2009

Liquid microparticulated seaweed calcium was manufactured via a wet grinding process. Thereafter, different forming agents such as cyclodextrin, gum arabic, and Na-caseinate were added to the liquid calcium, which was then spray-dried to investigate the quality of the powdered calcium treatments. The moisture contents of samples were approximately 2%. It was also determined that the different kinds of forming agents did not affect the spray drying efficiency. In addition, calcium solubility was the highest in a solution of pH 2. In buffer solution and vinegar, the powdered calcium made with gum arabic showed the highest solubility among the treatments. The calcium contents of all the powdered microparticulate seaweed calcium samples were about 28%, and calcium content was not affected by the forming agents. The spray-dried calcium powder made by spray drying with gum arabic had the highest water vapor uptake, whereas the seaweed calcium was stable in terms of water adsorption. The results of SEM observations indicated that a portion of the spray-dried calcium powders were in nano-scale after wet-grinding. Among the treatments, the use of saccharides as a forming agent resulted in the most uniform particle distribution after spray-drying.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.184-192
• /
• 2017

Rice flours from five rice (Oryza sativa L.) varieties with different amylose content were prepared by both wet and dry milling processes. The moisture content of wet-milled rice flours (WMR) was approximately three-times higher than that of dry-milled rice flours (DMR). Water absorption index (WAI), water solubility index (WSI), and swelling power (SP) increased in proportion to temperature. The WAI, WSI and SP values of DMR were higher than those of WMR. Baeokchal (BOC), which is a waxy rice cultivar, had a significantly high WSI value. Pasting properties of DMR, except for the BOC cultivar, resulted in an increase in peak, trough, final, and setback viscosities. The levels of resistant starch in four cultivars, except for Dodamssal (DDS), were under 1%, irrespective of the milling process, whereas the resistant starch contents of DMR and WMR in DDS were 9.18% and 6.27%, respectively. In vitro digestibility of WMR was higher than that of DMR, and the estimated glycemic index of the rice flour varieties ranged from 57.6 to 81.3. Damaged starch content of WMR was less than that of DMR; in addition, a negative correlation was observed between the amylose and damaged starch contents of WMR. These results suggest that the properties of rice flour vary depending on the milling method and flour variety, and could be a reference for selecting the appropriate processing method.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.60-64
• /
• 1997

핵연료의 가공공정에서 발생하는 스러지를 건식처리공정으로 회수 정제할 수 있는 건식처리 방법에 대하여 논의하고자 하였다. 건식처리방법은 수용액을 전혀 사용하지 알기 때문에 폐기물의 발생량이 습식처리방법에 비해 훨씬 줄어든다. 산화우라늄은 고온의 용융염중에서 염소개스에 의해 염소화반응을 통하여 우라늄염화물을 생성되게 되어 이들은 전기적으로 이동이 가능한 형태로 바뀌므로 전극에 선택적으로 전착될 수 있기 때문에 다른 금속이온과 분리할 수 있다. 본 보고서에서는 산화우라늄의 염소화공정, 전착공정에 대하여 기술하였고 전착된 산화물의 물리적 특성에 대하여 요약하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.97-97
• /
• 2012

비스코스 레이온 소재는 목재 펄프를 원료로 한 재생섬유로서 Drape성과 반발성은 탁월하나, 습식 방사에 따른 분자 구조적 불안정성으로 소비자가 일반 세탁 시 수축발생으로 종종 Dry Cleaning을 해야 하는 문제점들이 있음. 본 연구에서는 이와 같은 레이온의 단점을 극복하고 신축성 발현 및 형태안정성을 부여하기 위해 Rayon DTY사와 Spun T/R 40's를 개발하고 다양한 조직의 환편물을 제작하였으며, 기존의 레이온 제품 대비 수축률 등 형태안정성과 신축특성이 발현될 수 있는 염색가공 공정 조건을 설정하였음. 먼저 전처리시 균일하고 안정적인 수축이 발생하도록 하여 최종 생산품의 형태안정성과 신축성이 유지 될 수 있는 최적의 조건을 설정하였음. 전처리는 저온 축소 후 고온에서 정련하는 공정이 환편물의 조직에 관계없이 우수하였으며, 비교적 견뢰도가 우수하다고 판단되는 시판 분산염료 및 반응성염료를 사용하여 Polyester/Rayon의 2욕 2단 염색을 진행하였음. 또한 시제품의 품위를 높이기 위해 레이온 섬유의 고유한 특성을 부여할 수 있는 유연처방을 사용하여 총 13종의 환편물을 개발할 수 있었으며, 이렇게 개발된 원단은 형태안정성 -2.5~1.0%, 신장회복률 83% 이상, 필링성 4-5급의 결과를 나타내었음.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.518-523
• /
• 2006

Wet wire drawing of brass coated steel wire, used for tire reinforcement, is realized with Tungsten Carbide(WC) dies sintered with a cobalt(Co) binder. Dies wear represents an important limitation to the production process and cost savings. Several parameters, such as Co content, WC grain size of tungsten carbide, sintering conditions, and so on, affect on the wear of the drawing die. In this study, the effect of the diamond abrasive particle size on the life of the WC centered dies of the wet wire drawing was investigated. Wet wire drawing experiments were carried out on a wet wire drawing machine. From the experiments, the dies life, dies fracture, wire surface roughness, and wire breaks were investigated. From the results, it was found that the wear of the WC dies increased with the increase in the diamond abrasive particle size.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.268-272
• /
• 2004

Transparent materials such as fused silica are widely utilized in optical and optoelectronics field because of its outstanding properties, such as transparency in a wide wavelength range, strong damage resistance for laser irradiation, and high thermal and chemical stability. In this study, we made a few micro patterns on the surface of fused silica plate using laser induced wet etching. KrF excimer laser was used as a light source. There were no burrs and micro cracks on the etched surface of fused silica and the flatness of the etched surface was fairly good. We investigated the influence of etchant upon the etch rate and quality in laser induced wet etching. Pyrene-acetone solution and toluene were used as etchant. In the side of etch rate, toluene solution was better than pyrene-acetone solution. But we made in wider range of energy density using pyrene-acetone solution. But pyrene-acetone solution gave us wider window of energy density for successful micro patterning.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.71-77
• /
• 2002

The Production of fine wire through wet wire drawing process with appropriate pass schedule would be impossible without understanding of relationship among many process parameters. Therefore, this paper investigates the relationship among process parameters of wet wire drawing process. In this study, it is possible to obtain the important basic data that can be used in the pass schedule of multi-pass wet wire drawing process. In order to verify the effectiveness of the analysis, pass redesign was performed based on the result of analysis to reduce the wire breakage. The wire breakage between the conventional pass schedule and the redesigned pass schedule was compared by the FE analysis and the wet win drawing experiment.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.322-330
• /
• 2014

The phospholipid-based MPCE(2-Methacryloxyethyl Phosphoryl Chlorine) copolymer was mixed with wet polyurethane for coating of nylon fabrics. The substitution rate of water in coagulation bath with DMF was changed under control of the size of formed hydrophilic microporous cell enable to manufacture excellent breathable, anti-bacterial and moisture control fabrics. Biocompatible property, vapor permeability, hydrostatic pressure, moisture management and anti-bacterial property were investigated for treated nylon fabrics. In result, increased moisture transmission rates, decreased water resistance and outstanding moisture control property could be confirmed by enhanced hydrophilicity of wet-coated nylon fabric with MPCE copolymer.