• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.299-303
• /
• 2020

Currently, electric furnace oxide slag is mostly used for soil or road use due to its nature. Although electric furnace oxidation slag is an industrial byproduct, not a circulating aggregate, the shortcomings of electric furnace oxidation slag are gradually being resolved due to the development of technology, and it is said that electric furnace oxidation slag is enough to be used as aggregates in light of research and technology conditions outside of Korea. However, there are difficulties in expanding construction and application, given that the current standard for electric furnace oxid slag only defines recycling purposes and does not have specific regulations. Therefore, institutional supplementation is needed to utilize oxidation slag as electricity. In this study, the laws and system related to oxidation slag by electricity are reviewed, laws related to recycled aggregate are examined, and measures for improvement are proposed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.9-14
• /
• 2022

Most of the existing research on ferronickel slag has focused on its potential as aggregate and fine aggregate, this study was conducted focusing on the potential of ferronickel slag powder as a concrete admixture. For concrete, which fly ash, blast furnace slag, and FSP were mixed with each 10 % type the reactivity was evaluated by applying ASTM C 1260 of the United States. As a result, compared with the control group, the expansion rate of fly ash decreased by 8.43 % and that of fine blast furnace slag powder decreased by 14.46 %, while the expansion rate of ferronickel slag decreased by 49.40 %. it was confirmed that ferronickel slag can sufficiently be replaced existing supplementary cementitious admixtures such as fly ash and blast furnace slag in terms of suppressing the reactivity of aggregates. However as a result of SEM analysis, ettringites were generated, and additional research about how it affects concrete is needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.407-415
• /
• 2008

Hydration reaction of Free-CaO is thought to be the main reason of expansion failure of slag. A lot of research institutions are conducting studies on solutions to this problem, and moreover it has been carried out how to make use of aggregates for concrete. While studies covering wide rage of blast furnace slag have been accomplished in the country, studies on steelmaking slag are insufficient. Therefore, this study aimed at analyzing basic physical properties of electric arc furnace oxidizing slag, which is the main material, and furthermore it focused on how to make use of aggregates for concrete examining chemical mechanism, which can be put to practical use. To address this issue, components of electric arc furnace oxidizing slag were analyzed with measurement of physical properties, followed by long-term strength and detailed durability analysis, which can evaluate the appropriateness of application of cement concrete. Besides the environmental conservation and recycling which can be obtained by application of industry byproducts, commercializing of electric arc furnace oxidizing slag as fine aggregates for cement concrete are expected.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2000

In order to measure the thickness of the slag layer on the molten metal in the melting vessels for steel making foundaries, we manufactured the slag-thickness measuring system consisting of the probe and its driving system, which is based on the principle of detecting the change in the electrical resistivity. Experimental results show that there is a very wide difference of the electrical resistivity by the order of about $10^3$ between the molten metal and the hot slag and, hence, the air/slag and slag/molten metal interface can be exactly detected with the use of the probe which can be moved toward the melt. Therefore, it can be concluded that the proposed scheme of the slag measurement system in this study is Proven to be excellent in its efficiency and accuracy.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.15-15
• /
• 2009

최근 컨테이너선은 점차 대형화되고 있으며, 이에 따라 선체의 외판 상부의 철판 두께도 최대 80mm 까지 설계되고 있다. 블록 외판의 수직 맞대기 용접의 경우 고능률 용접기법인 Electro Gas Weldig(이하 EGW)이 적용되고 있으나, 극 후판의 경우, 기존의 한 개의 전극만으로는 적용 가능한 두께 범위의 한계가 있어 수직 맞대기 용접의 용접생산을 향상시키기 위해 2개의 전극을 사용하는 탄뎀 EGW 기법에 의한 시공법이 고려되었다. 탄뎀 EGW 기법의 시공법에 관한 보고서는 국내외에서 많이 발표되어져 왔다. 하지만 실선 적용에 있어 두께 80mm, 길이 2M 이상의 철판을 안정적으로 용접하기 위한 장애요소는 용접 중 적절한 슬래그의 배출 조절이다. 두개의 용접 와이어를 동시에 공급할 때 발생하는 슬래그를 균형있게 배출하지 못하는 경우 용융, 금속 상부에 적층되는 슬래그의 양이 증가하게 되고, 아크는 불안해져서 전극팁에의 슬래그 부착, 전극 팁의 발열 등에 의한 요인들이 송급을 불안하게 하여 연속 용접이 어려워진다. 본 연구에서는 탄뎀 EGW 기법을 실제로 현업에 적용하기 위해서는 안정적인 슬래그 배출에 착안하여 동당금의 형상에 따라 슬래그의 배출 성능을 확인하고 형상별 전류, 전압 파형을 측정하고, 파형 결과에 따라 아크 안정성을 평가함으로서 탄뎀 EGW 용접기법에 적정한 동당금을 설계한 결과를 소개하고자 하였다.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.24-30
• /
• 2002

Reduced and modified converter slag was ball milled and sieved to -200/+325 mesh. CaO,$SiO_2$, $Fe_2$$O_3$ was added to slag powder and mixed to make it similar to the composition of normal portlant cement. The pellet made of this powder was heated from $1250^{\circ}C$ to $1450^{\circ}C$ for 15 min～45 min. Most feasible condition for making slag cement clinker is the heating more than 20 min at $1450^{\circ}C$. The compressive strength of the mortar made of this slag cement clinker was better than that of normal port-lant cement in long time curing.

• Clean Technology
• /
• v.6 no.2
• /
• pp.85-92
• /
• 2000

For increase of recycling rate of steel-making slag, the swine wastewater treatment using steel-making slag as filter media were investigated. As the discharged wastewater from the existing facilities retreated through the laboratory wastewater treatment equipment filled with steel-making slag as filter, pH of retreated wastewater was increased, and the concentration of N, P, COD and BOD were decreased. For the pilot experiment, steel-making slag eliminated suspended substances and absorbed a shock of sudden change of their concentration in influent. COD and BOD were decreased under the influence of them in influent. As calcination increased the amount of free-CaO in steel-making slag, the calcined eliminated phosphorus more effectively and increase pH than the uncalcined.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.4
• /
• pp.1-8
• /
• 2009

Accumulated slag mass was predicted to estimate accurate performance of kick motor (KM) system. The validation of numerical analysis was performed with mass flow rate measured at the 4th ground test of the KM. The study described here includes the internal flow field of KM at various time steps during burning. Slag mass accumulation was analyzed through the aluminum oxide particle paths to predict slag mass deposition. Numerical analysis to solve both flow field and droplet accumulation was performed with Fluent 6.3 program. Analysing the effects of the acceleration, starting position and diameters of the aluminum oxide particles, total slag mass accumulation was obtained.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.9-16
• /
• 1996

The purpose of ths rescarch was to detcrmine a po\sihle application of the slag thc sliigs of iron-and steelmaking as afiller at asphalt concrete. The slags were crnshed for bcller recycling of lhree typical slags as ascon tiller. and thcn thcphysical and chemical properlies welt examincd The mechanical properliea of asphall cnncrete after filling with slagpowders under 200 mesh us fillers wcre tested to fulfill thc Korean Standnrds. Optimum tempcrafure of mixing the slagswith asphalt wils 140-160$^{\circ}$C. The density, the stabilily. gap ratio and the samration degree were 2.37 glcm', 810 kg. 3.4"'||'&'||'and 80.4%, respectively.tively.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.150-155
• /
• 2006

제강공정에서 발생되는 $CaO-Al_{2}O_{3}-SiO_{2}$계 조성을 갖는 2 차 정련슬래그 (래들 슬래그)를 이용하여 하수슬러지용 고화재개발 및 하수슬러지 고화체의 물성에 관한 연구를 수행하였다. 래들슬래그는 냉각과정에서 분화되는 성질이 있어 냉각후 분말상의 슬래그가 만들어진다. 분말상 슬래그의 주 결정상은 $12CaO{\cdot}7Al_{2}O_{3}$ 및 $2CaO{\cdot}SiO_{2}$로 구성되어 있다. $12CaO{\cdot}7Al_{2}O_{3}$ 상은 속경성 시멘트의 특징이 있다. 또한 $CaSO_{4}$와 혼합사용시 ettringite 상을 형성시켜 하수슬러지의 함수율 저감효과 및 강도발현 효과가 우수한 결과를 얻었다. $Cl^{-}$ 이온의 고정화면에서는 고화재중 래들슬래그의 혼합비가 높을수록 고화체 구조내에 $Cl^{-}$ 이온이 고정화되어 용출량은 감소하였다. 고화재로서 제강부산물을 사용하기 때문에 경제성이 있으며, $Cl^{-}$ 이온 함량이 높은 하수슬러지 고화재로서의 재활용이 기대된다.