• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2011

Purpose : A new inhomogeneity correction method based on two-point Dixon sequence is proposed to obtain water and fat images at 0.35T, low field magnetic resonance imaging (MRI) system. Materials and Methods : Joint phase-magnitude density function (JPMF) is obtained from the in-phase and out-of-phase images by the two-point Dixon method. The range of the water signal is adjusted from the JPMF, and 3D inhomogeneity map is obtained from the phase of corresponding water volume. The 3D inhomogeneity map is used to correct the inhomogeneity field iteratively. Results : The proposed water-fat imaging method was successfully applied to various organs. The proposed 3D inhomogeneity correction algorithm provides good performances in overall multi-slice images. Conclusion : The proposed water-fat separation method using JPMF is robust to field inhomogeneity. Three dimensional inhomogeneity map and the iterative inhomogeneity correction algorithm improve water and fat imaging substantially.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.70-80
• /
• 2006

Spin echo gradient moment nulling pulse sequences were designed and implemented on a clinical magnetic resonance imaging system. A new technique was introduced for flow compensation that minimized echo time and effectively suppresses unwanted echoes on the slice selection gradient axis in spin echo sequences. A unified gradient shape was used in all orders of flow compensation up to the third order. A dual-purpose gradient was applied for flow compensation and to reduce unwanted artifacts. The sequences were used to generate images of phantoms and/or human brains. This technique was especially good at reducing eddy currents and artifacts related to imperfection of the refocusing pulse. The developed sequences were found to have shorter echo times and better flow compensation in through-plane flow than those of the previous models that were used by other investigators.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.941-946
• /
• 2019

Computed tomography (CT) has been increasing in frequency and indications for use in clinical diagnosis and treatment decisions. Multidetector CT has the advantage of shortening the inspection time and obtaining a high resolution image compared to a single detector CT, but has been pointed out the disadvantage of increasing the radiation exposure. In addition, when the low tube voltage is used to reduce the exposure dose in the CT, noise increases relatively. In the existing method, the method of finding the optimal image quality using the method of adjusting the parameters of the image reconstruction method is not a fundamental measure. In this study, we applied a double-tree complex wavelet algorithm and analyzed the results to maintain the normal signal and remove only noise. Experimental results show that the noise is reduced from 8.53 to 4.51 when using a complex oriented 2D method with 100kVp and 0.5sec rotation time. Through this study, it was possible to remove the noise and reduce the patient dose by using the optimal noise reduction algorithm. The results of this study can be used to reduce the exposure of patients due to the low dose of CT.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.653-660
• /
• 2009

A research for middleware of WSN can provide sensor applications with avoiding tight coupling of hardware, ease of development, and abstract data access. However, previous works have some limitations which should install their own middleware onto the all sensor nodes resulting in computational and communication overhead. In order to address it, we proposed a virtual sensor overlay network, called TinyONet-Lite which introduced virtual sensors to model a virtual counterpart of physical sensors. These virtual sensors dynamically grouped into an overlay network, Slice, which provides middleware services. We implemented TinyONet-Lite on mote class hardware with TinyOS. In accordance with experiments and comparison with existing researches, TinyONet-Lite was proved to show advantages of extensibility, dynamic service composition and reducing overhead.

• Journal of Korea Game Society
• /
• v.15 no.2
• /
• pp.159-168
• /
• 2015

This paper introduces effective noise removal method for medical ultrasound volume data. Ultrasound volume data need to be filtered because it has a lot of noise. Conventional 2d filtering methods ignore information of adjacent layers and conventional 3d filtering methods are slow or have simple filter that are not efficient for removing noise and also don't equally operate filtering because that don't take into account ultrasound' sampling character. To solve this problem, we introduce method that fast perform in parallel bilateral filtering that is known as good for noise removal and adjust proportionally window size depending on that's position. Experiments compare noise removal and loss of original data among average filtered or biliteral filtered or adaptive biliteral filtered ultrasound volume rendering images. In this way, we can more efficiently and correctly remove noise of ultrasound volume data.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.793-796
• /
• 2011

H.264/AVC compresses video data by applying DCT transform, quantization and entropy coding processes to the residual signal obtained by inter/intra prediction. This paper proposes a method enhancing an existing DC offset adjustment technology which uses information of neighboring blocks to reduce residual information for improving coding efficiency. DC offset information is not sent over bitstreams, but calculated in the same way both in the decoder and in the encoder. Experimental results show that the proposed method enhances coding efficiency by 0.25% in average BD-Rate compared to H.264/AVC and gives better or worse coding efficiency compared to the existing DC offset method depending on video sequences with coding efficiency degradation by 0.09% in average BD-Rate. This experimental results also show that further coding efficiency improvement is possible by applying the proposed method adaptively to slice or macroblock coding units.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.72-78
• /
• 2016

A CCD camera and an LED light source were combined to fabricate a compact optical CT scanner for the therapeutic radiation dose evaluation of a polymer gel dosimeter. After the collimated beam emitted by the LED passed through aquarium, gel phantom, and telecentric lens, an image was collected by the CCD camera and reconstructed using MATLAB. By using a stepping motor and LabVIEW, the gel dosimeter was rotated at every $0.72^{\circ}$, and the time for collecting 500 slice images per a revolution was within 20 min. At a spatial frequency of 4.5 lp/mm of the optical CT scanner, the modulation transfer function value was 72%. The linear correlation coefficient of the optical CT scanner for the polymer gel dosimeter was 0.987.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1635-1640
• /
• 2011

The objective of this study is to design of a cooling system of the over-molding mold for a socket component of an automobile wiper by performing numerical analyses. Hot spots in which the temperature distributions are higher than those of other region, were estimated by an initial over-molding analysis for the initial design of the mold. On the basis of the initial over-molding analysis, two types of cooling system designs with a linear cooling channel and a volumetric heat sink, were considered to improve the cooling characteristics of hot spots. To obtain an appropriate cooling system design, the effects of the diameter and the position of the linear cooling channels on the cooling characteristics and the product qualities were quantitatively examined. In addition, the effects of the design of the volumetric heat sink on the cooling characteristics and deformation distributions in the molded product were investigated. The results of the over-molding analysis of the two types of cooling systems showed that the multi-sliced over-molding mold with a volumetric heat sink can improve both the product quality and the cooling characteristics of the mold.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.501-508
• /
• 2017

The dependence of CT scanning parameters on the CT number to physical density conversion from the CT image of CT and CBCT electron density phantom acquired by the CT scanner using in radiotherapy were analyzed by experiment. The CT numbers were independent of the tube current product exposure time, slice thickness, filter of image reconstruction, field of view and volume of phantom. But the CT numbers were dependent on the tube voltage and cross section of phantom. As a result, for physical density range above 0, the maximum CT number difference observed at the tube voltage between 90 and 120 kVp was 27%, and the maximum CT number difference observed between CT body and head electron density phantom was 15%.

• Bulletin of Food Technology
• /
• v.15 no.2
• /
• pp.93-99
• /
• 2002

고압처리로 멸균된(high-pressure- sterilized) 저산성 식품은 아직 본격적으로 시장에 나오지는 않고 있다. 그러나 고압처리로 살균시켜(high-pressure-pasteurized) 제품의 부가가치를 높인 상품들은 일부 시판되고 있다. 미국시장에는 구아카몰(guacamole),굴 등이 있고, 일본과 유럽에는 잼, 젤리, 생선제품, 육제품, 슬라이스 햄, 샐러드 드레싱, 쌀떡, 주스, 요구르트 등이 판매되고 있다. 기술이 발전되어 처리비용이 떨어짐에따라 우유나 오렌지 주스 같은 저부가가치의 제품(high-volume commodity products)에도 고압처리 기술이 적용되는 예를 보게 될 것이다.미국 FDA의 "열처리된 저산성식품은 용접밀봉된 용기(캔, hermetically sealed container)에 포장되어야 한다." 는 규정(Title 21, Part 113 of the Code Federal Regulations)은 고압처리 식품을 염두에 두고 만들어진 규정은 아니지만, 저산성식품의 고압처리 공정(high-pressure processing)은 강력한 살균력을 제공하고 있다. 따라서 위의 FDA 규정(21 CFR 113)의 모든 조항은 고압처리 저산성 식품이 상업적인 생산에 들어가기 전에 시행되어야만 하는 것이다. 그 규정의 주요 조항중의 하나는 고압처리 공정에 대한 전문적인 지식을 가진 전문가나 위원회 등에 의하여 세부적인 고압처리공정 절차를 확립하는 것이다. 공정의 전문가들은 안전성을 증명하기 위해서 적합한 과학적인 방법을 사용하여 고압처리 공정을 확립해야만 한다. 저산성 식품에 대한 고압처리 공정은 주의깊게 설정된 공정조건하에서 재현성 있게 안전한 식품을 생산할 수 있어야 한다. 살균에 대한 안전성과 재현성이 입증되면 고압에 의한 살균처리공정 설계는 일반적인 대량생산 공정으로 활용될 수 있게 된다. PP(고압처리공정)의 유효성이 보다 확실하게 입증되고 널리 활용되려면, 공정의 살균력과 일관성(uniformity)을 증명하는 미생물적, 물리적, 화학적, 공학적인 여러 분야가 통합된 검증방법이 필요하다. 전통적인 열처리 공정은 스팀열의 가열시간으로 설명이 충분하다. 물론 HPP살균에서도 시간과 온도는 주요 변수이지만, 압력에 의한 미생물살균도 고려되어야만 한다. 또한 점도, 밀도, 구성성분, pH, 수분활성도 같은 해당제품의 특성도 제품의 고압처리 살균공정, 특히 미생물의 사멸에 영향을 미칠 수도 있다.