Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.370.2-370.2
/
2016
투명 박막 태양전지는 건물과 일체화 된 building-integrated photovoltaics (BIPV) 시스템에 적용되어 건물의 외장재로서 외관의 심미적 가치를 높일 수 있다. 현재 BIPV 모듈은 glass 타입의 형태가 시장을 주도할 것으로 예상되며[1], 건물의 외부 미관을 고려하여 투명 박막 태양전지에 색을 구현하는 연구가 진행되고 있다. 투명 박막 태양전지에 적용하기 위한 목적으로 본 연구에서는 스핀코팅을 이용하여 표면 플라즈몬 효과가 큰 Cu 나노입자를 Si 웨이퍼와 유리기판 위에 각각 분포 시킨 후, 광학적 특성을 분석하였다. 스핀코팅의 속도(rpm)를 다양하게 변화 시킨 후 나노 입자의 분포를 관찰하였으며, 속도가 증가할수록 나노입자의 수는 감소함을 확인하였다. 또한 속도가 증가할수록 입자 사이의 거리는 멀어졌으며, 최저 속도 100 rpm에 비해 4000 rpm에서 스핀코팅 한 입자들은 응집이 상대적으로 되지 않았음을 관찰하였다. 속도가 증가할수록 입자가 기판 위에 적게 잔재하기 때문에 반사율과 투과율이 가시광선 영역에서 증가하였으며, 유리 기판에 구현한 색깔이 점차 옅어짐을 관찰하였다. 이러한 결과로부터 스핀코팅의 속도를 변화시킴으로써 나노입자의 분포 양상과 이에 따른 색상의 변화를 유발 할 수 있다는 사실을 확인하였다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.371-371
/
2011
태양전지에 대한 관심과 수요가 증가함에 따라 태양전지의 대면적화 및 저가 생산을 위한 유기태양전지에 대한 연구가 활발히 진행되고 있다. 유기태양전지의 대면적화는 현재의 태양전지 시장을 대체하기 위한 중요한 요소 중 하나이다. 기존의 유기태양전지는 주로 스핀코팅법에 의해 제작 되었으나 대면적화 및 유연성 박막 제조 시 공정상 어려움이 있기 때문에 스핀코팅을 대체할 새로운 제조 방법이 개발되고 있다. 그 중, 스프레이 공법을 적용한 유기태양전지 제조방법이 각광을 받고 있으며, 이에 대한 연구가 활발히 진행되고 있다. 본 연구는 유기태양전지 제작을 위하여 금속 전극을 제외한 전 공정 (N형 ZnO 층 -P3HT:PCBM 광흡수층-P형 PEDOT:PSS층)을 용액기반의 스프레이 코팅 공정을 적용하여 제작하였다. 스프레이 공정을 통해 코팅한 ZnO, 광활성 및 PEDOT:PSS 박막의 경우, 각각의 표면거칠기는 스핀코팅에 의해 형성된 박막과 유사한 거칠기 값을 가졌다. 최적의 스프레이 공정을 통하여 ITO/ZnO/P3HT:PCBM/PEDOT:PSS/Ag의 구조를 가지는 invert형 유기태양전지를 제작한 결과, AM 1.5G의 광원조건에서 2.95 %의 광변환 효율을 얻을 수 있었다. 이는 기존의 스핀코팅법으로 제작된 소자와 거의 비슷한 성능으로써 저가형□대면적 유기태양전지의 제작 가능성을 보여준 결과이다.
Cheon, Yeong Ah;Nam, Jin-Su;Son, Kyung Soo;Im, Young Tae;Ahn, Won Kee;Chung, Bong Geun
Transactions of the Korean Society of Mechanical Engineers B
/
v.39
no.5
/
pp.463-469
/
2015
In this study, we synthesized graphene oxide and developed novel spin-spray coating technology. The graphene oxide thin film was uniformly coated on amine-functionalized glass surfaces using spin-spray coating technology. We also stacked up to four layers of graphene oxide on glass substrates in a uniform manner. From the results, we infer that this spin-spray coating of graphene oxide thin film could be a powerful tool for various electronic display coating applications.
The $In_{2}O_{3}$ thin films were fabricated on a alumina substrate by spin-coating method and the gas sensing properties were tested. The coating solution was synthesized by the mixing of aqueous solution of $In(OH)_{3}$ and acetic acid, and ammonium carboxymethyl cellulose as a binder. The $In_{2}O_{3}$ thin films between 71 and 210nm thick were obtained by spin-coating between 1 and 7 times followed by drying at $110^{\circ}C$ and calcining at $600^{\circ}C$. The films consisted of a dense stack of tiny $In_{2}O_{3}$ particles between 23 and 27nm in diameter and covered well large grains of the alumina substrate. Then film thickness was well controlled by the number of spin-coating. The fabricated $In_{2}O_{3}$ films showed high sensitivity and very fast response property to CO and $H_{2}$.
Ha, Jae-Young;Ryu, Sung-Won;Kwon, Oh-Jung;Cho, Do-Hyun;Kim, Hwa-Min;Park, Seung-Hwan;Rhee, Byung-Rho;Kim, Jong-Jae
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.06a
/
pp.457-458
/
2008
본 연구에서는 PCBM([6,6]-Phenyl $C_{61}$ butric acid methyl ester)과 P3HT(Poly(3-hexylthiophene-2,5-diyl (regiorandom))의 Donor, Acceptor 물질을 이용하여 스핀코팅법을 사용하여 PEDOT가 코팅된 ITO 유리기판에 스핀 코팅법을 사용하여 광활성층을 증착하였다. 이렇게 코팅된 유리기판에 열 증착법 사용하여 Al(cathode층)전극을 증착하여 유기태양전지를 제작하였다. 각각의 층에 대해서 SEM(전자주사현미경)을 이용하여 두께를 측정하였고 UV분광계를 이용하여 투과도를 측정하고 투과도를 이용하여 광학적 밴드갭을 계산하였다. ITO/PEDOT/ACTIVE AREA/Al 구조의 태양전지를 제작하여 광활성층의 두께와 Al의 두께에 따른 효율성을 측정하여 1% 이내의 효율을 보이는 태양전지를 제작하였다. PEDOT는 OLED에서 HTL층으로 사용되며 흘의 이동을 원활하게 해주는 역할을 한다.
In this paper, front color glass for Building Integrated Photovoltaic (BIPV) system was implemented by spin coating method using color solution. Solutions suitable for color solutions were investigated using pearlescent pigments and various solutions to implement color glass. One of investigated solutions, NOA 63 and NOA 65, which are ultraviolet light curing agents, were able to implement color glass with superior coating properties and color reproducibility than other solutions. Color glass realized by spin coating with a NOA 65 based color solution showed high transmittance of 86% in the visible and near-infrared wavelength bands, and the change in optical properties of color glass over time was insignificant, making it a suitable material for realizing color glass for BIPV Suitable as a color solution. The solution process method using the spin coating method is expected to facilitate the manufacturing process of front color glass for BIPV as it can produce color glass more easily and quickly than the existing physical deposition method or color glass manufacturing process using nanoparticles.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2003.07b
/
pp.1082-1085
/
2003
본 연구에서는 고분자를 사용하여 만든 유기EL소자인 PLED (Polymer Light Emitting Diode)의 제조공정 변화에 따른 소자성능을 연구하였다. PLED의 제작은 크게 ITO 기판 제작, 발광층 및 전극 증착 등의 공정으로 나누어진다. ITO 기판은 사진식각공정으로, 발광층의 증착은 스핀코팅법으로, 전극은 진공증착법으로 각각 제작하였다. 코팅 시 스핀속도 및 점도 조절을 통하여 발광층의 두께를 조절하였고, 스핀코팅 후 건조방법에 따라서 표면의 uniformity와 발광특성을 비교해 보았다. 실험결과 특정 두께에서 발광특성이 우수하게 나타나는 것을 확인할 수 있었다. 그리고 건조방법에 따라 발광층의 표면 uniformity에 차이가 있었으며, 표면 uniformity에 따라 diode의 I-V 특성 경향이 달리 나타났다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.30
no.1
/
pp.7-11
/
2020
Carbon solubility on the paste deposition methods in the carbon-doped TiZrN coating was investigated in terms of lattice distortion and atomic concentration. After depositing the carbon paste by the dip coating, spin coating and screen printing, the laser was ablated to form the carbon gradient layer. Thickness and the concentration of doped carbon depended on the paste deposition method. Crystal structure analysis indicated that more lattice distortion occurred when coating layers were doped with spin coating and screen printing than when coating layers were doped with dip coating. The XPS depth profile showed that the thickness of carbon gradient layer by dip coating was about 30 nm, spin coating and screen printing are approximately 100 nm, formed more gradient layer. The hardness before laser carburization was about 30 GPa, and the hardness of 31 GPa with dip coating and 37 GPa with spin coating and screen printing. It was indicated that paste deposition methods for laser carburization contributed to lattice distortion and gradient layer.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.06a
/
pp.389-389
/
2008
나노-스피어 리소그래피는 기존 리소그래피 방법에 비해 나노 크기의 패턴을 저비용에 공정이 간단하고, 대면적 패터닝이 가능하다는 장점이 있다. 본 논문에서는 나노-스피어 리소그래피 공정을 이용하여 실리콘 기판 위에 2차원 광자결정 구조를 제작하였다. 실리콘 기판 위에 직경이 500 nm 인 폴리스티렌 나노-스피어를 스핀 코팅 방법으로 단일막을 형성하였다. 스핀코팅 조건은 스핀속도와 시간을 조절하여 1단계는 400 rpm에서 10초, 2단계는 800 rpm에서 120초, 3 단계는 1400 rpm 에서 10초로 공정하였다. 그리고 산소 플라즈마를 이용한 반응성 이온 식각공정으로 폴리스티렌 나노-스피어의 크기를 조절할 수 있었으며, 이때 실리콘 기판 위에 형성된 다양한 크기의 폴리스티렌 나노-스피어 단일막은 금속막 증착시 마스크의 역할을 하게 된다. 금속막의 증착은 RF 마그네트론 스퍼터링 시스템을 이용하였으며, 공정 조건은 RF power를 100W, 공정 압력을 5 mTorr, Ar 유량을 10sccm으로 하였다. 스퍼터링 공정 후 폴리스티렌 나노-스피어를 제거함으로써 2 차원 광자결정 구조를 제작할 수 있었다. 실험 결과 단일막으로 형성된 폴리스티렌 나노-스피어의 크기를 조절함으로써 다양한 2차원 광자결정 구조 제작이 가능함을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.