• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.25-31
• /
• 2009

This paper introduces a spectrally formulated element method (SEM) for the beams treated with passive constrained layer damping (PCLD). The viscoelastic core of the beams has a complex modulus that varies with frequency. The SEM is formulated in the frequency domain using dynamic shape functions based on the exact displacement solutions from progressive wave methods, which implicitly account for the frequency-dependent complex modulus of the viscoelastic core. The frequency response function and dynamic responses obtained by the SEM and the conventional finite element method (CFEM) are compared to evaluate the validity and accuracy of the present spectral PCLD beam element model. The spectral PCLD beam element model is found to provide very reliable results when compared with the conventional finite element model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.56-60
• /
• 1995

본 연구에서는 기존의 연구에서 다룬바 없는 분포하중의 경우에 대해 스펙트럴요소법을 적용하기 위해 1) 힘과 변위와의 관계를 이용하여 Bernoulli-Euler보와 1차원 Timoshenko-Mindlin평판에 대한 스펙트럴요소를 유도하고 2) 스펙트럴 요소법을 이용하여 분포하중을 받는 이들 구조물의 동적거동을 해석하고자 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.387-393
• /
• 2006

In this paper, a spectral element model is developed for the uniform straight pipelines conveying internal unsteady fluid flow. The spectral element matrix is formulated by using the exact frequency-domain solutions of the pipe-dynamics equations. The spectral element dynamic analysis is then conducted to evaluate the accuracy of the present spectral element model and to investigate the vibration characteristics and internal fluid characteristics of an example pipeline system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1092-1096
• /
• 2009

The spectral element modeling is known to provide very accurate structural dynamic characteristics, while reducing the number of degree-of-freedom to resolve the computational and cost problems. Thus, the spectral element model with variational method for an axially moving string subjected to axial tension is developed in the present paper. The high accuracy of the spectral element model is the verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension the vibration characteristics, wave characteristics, and the static and dynamic stabilities of a moving string are investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.45-56
• /
• 1994

A computationally efficient numerical method based on potential flow is developed for time-domain simulation of the nonlinear free-surface flows around a 2-dimensional hydrofoil. This numerical method, namely, spectral/boundary-element method, is a mixed one of the high-order spectral method and the boundary-element method in time-domain. The high-order spectral method is used to calculate the nonlinear evolution of free-surface, and the boundary-element method is used to calculate the effects of the hydrofoil and the shed vortex. As application examples, nonlinear free-surface flows around a 2-dimensional hydrofoil which starts from the rest and translates near the free-surface with or without harmonic oscillations are calculated. Nonlinear/unsteady results of free-surface waves and hydrodynamic farces are shown and discussed. Particularly, the results of steady-state which are obtained as a special case of the present unsteady solution are compared with others' calculated and experimental results, and good agreements are observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.85-89
• /
• 2005

For the analysis of a vibrating two dimensional structure such as the simply supported rectangular plate, Spectral Finite Element Method (SFEM) has been studied. Under the condition that two parallel edges are simply supported at least and the other two edges can be arbitrary, Spectral Finite Element has been developed. Using this element SFEM is applied to the vibrating rectangular plate which all edges are simply supported, and obtain the frequency response function in frequency domain and the dynamic response in time domain. To evaluate these results normal mode method and finite element method (FEM) are also accomplished and compared. It is seen that SFEM is more powerful analysis tool than FEM in high frequency range.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.35-44
• /
• 2022

The study on the wake vortex behavior during the aircraft's take-off and landing flight phase is critical to the flight safety of the aircraft, following close behind and the economy of the airport. The study on the wake vortex behavior should include the understanding of the ground effect on the behavior of the multiple wake vortices, generated from aircraft during the take-off and landing flight phase. In thia study, numerical schemes that can consider the ground effect were devised, by applying a vorticity boundary condition and an image method into the existing two-dimensional Fourier-spectral method. The present method was validated by comparing the present results, with the computed and measured data in the published literature. It was shown that the present method can predict the generation and behavior of the secondary vortex near the ground with reasonable accuracy. In future, the effect of the atmospheric conditions such as the stratification and the wind shear on the behavior of the vortex pair will be studied.

• The Korean Journal of Applied Statistics
• /
• v.29 no.3
• /
• pp.463-470
• /
• 2016

In analysing a time series on the frequency domain, the spectral estimator (or periodogram) is a very useful statistic to identify the periods of a time series. However, the spectral estimator is very sensitive in nature to outliers, so that the spectral estimator in terms of M-estimation has been studied by some researchers. Pak (2001) proposed an empirical method to choose a tuning parameter for the Huber's M-estimating function. In this article, we try to implement Pak's estimation proposal in the spectral estimator. We use the Korean housing price index as an example data set for comparing various M-estimating results.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.1-10
• /
• 2002

For the time-domain simulation of incipient breaking waves, usually the boundary integral method has been used so far, and it seems to be successful except a problem of too much computation time. The present paper shows a new computation technique for the simulation of breaking wave experiment. This technique uses the high-order spectral/boundary element method and the boundary integral method in sequence, and reduces the computation time remarkably. The wave generation and energy focusing process is efficiently simulated by the high-order spectral/boundary element method. Only the wave over-turning process is simulated by the boundary integral method. In the example calculation result, salient features of breaking waves such as high particle velocities and accelerations are shown.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.314-324
• /
• 2010

In waveguide structures, waves may be partially reflected by local non-uniformities. The effects of local non-uniformities has been previously investigated by means of a combined spectral element and finite element (SE/FE) method at relatively low frequencies. However, since the SE is formulated based on a beam theory, the SE/FE method is not appropriated for analysis at higher frequencies where complex deformation of the waveguide occurs. So it is necessary to extend this approach for high frequencies. For the wave propagation at higher frequencies, a combined spectral super element and finite element (SSE/FE) method is introduced in this paper. As an example of the application of this method, wave reflection and transmission due to a local defect in a rail are simulated at frequencies between 20kHz and 30kHz. Also numerical errors are evaluated by means of the conservation of the incident power.