• Title/Summary/Keyword: 스패닝 트리 프로토콜

Search Result 7, Processing Time 0.023 seconds

Layer 2 Routing with Multi-Spanning Tree Per a Node (노드 당 다중 스패닝 트리를 이용한 2계층 라우팅)

  • Suh, Chang-Jin;Shin, Ji-Soo;Kim, Kyung-Mi
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.9B
    • /
    • pp.751-759
    • /
    • 2008
  • Carrier Ethernet backbone network integrates distributed layer-2 based metro networks. In this networks, Multiple Spanning Tree Protocol (MSTP) has been uscd as a main routing protocol that allows multiple spanning trees in a network. A better routing protocol called IEEE802.1aq - Shortest Path Bridging (SPB) is recently proposed, that generates the shortest spanning tree per a destination node. As SPB provides a routing path per a destination node, there is no way to adapt network traffic at normal condition. If we are free from the principle of "a spanning tree per a destination node", we can achieve adaptive routing. Based on this philosophy, we propose a new spanning tree based protocol - Edge Node Divided Spanning Tree (ENDIST). ENDIST divides an edge node into sub-nodes as many as connecting links from the node and each sub-node generates a single shortest path tree based on SPB. Depending on network or nodal status, ENDIST chooses a better routing path by flow-basis. This added traffic engineering ability contributes to enhanced throughput and reduced delay in backbone networks. The simulation informs us that ENDIST's throughput under heavy load performs about 3.4-5.8 and 1.5-2.0 times compared with STP's and SPB's one respectively. Also, we verified that ENDIST's throughput corresponds to the theoretical upper bound at half of cases we investigated. This means that the proposed ENDIST is a dramatically enhanced and the close-to-perfect spanning tree based routing schemes.

A Link Protection Scheme with a Backup Link Spanning Tree for Provider Backbone Bridged Networks and Implementation (프로바이더 백본 브리지 망을 위한 백업링크 스패닝트리 기반 링크장애 복구기능과 구현)

  • Nam, Wie-Jung;Lee, Hyun-Joo;Yoon, Chong-Ho;Hong, Won-Taek;Moon, Jeong-Hoon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.1
    • /
    • pp.58-68
    • /
    • 2010
  • In this paper, we propose an efficient link protection switching scheme for provider backbone bridge systems with a spanning tree for backup links exclusively, and evaluate its performance. The proposed scheme offers guaranteed QoS flows even when a link fault occurrs in the primary link by flooding the flows over the profiled spanning tree. The flooding mechanism over the spanning tree can also provide low latency and remove the loopback flows. We also derive the efficiency of bandwidth usage for the normal flows and the number of lost frames during the link restoration. For evaluating its feasibility, we implement a prototype of PBB-TE systems based on the Linux bridge codes, which can support both link protection switching capability with CCM and MAC-in-MAC encapsulation. A related protocol analyzer is also developed. One can see that the proposed scheme and the prototype can be useful for developing carrier class Ethernet systems based on PBB-TE.

Design of Hybrid Group Update Protocol for Replica Consistency (복제 일관성을 위한 혼합 그룹 갱신 프로토콜 설계)

  • 이병욱
    • Journal of Internet Computing and Services
    • /
    • v.2 no.5
    • /
    • pp.71-79
    • /
    • 2001
  • Replication in distributed databases is to improve efficiency, availability, and autonomy, But applying the strict consistency in real systems is very difficult. In this paper, I introduce a hybrid protocol permitting group update through eager update propagation and weakening consistency through lazy update, This protocol manages replica version number for the group update consistency and generates partially ordered replica spanning tree for the serializability of lazy update transactions. It preserves weak consistency by combining synchronous and asynchronous update mechanism. Study of performance analysis for the efficiency of the protocol be included in next paper.

  • PDF

Physical Topology Discovery Algorithm for Ethernet Mesh Networks (이더넷 메시 망에서의 물리 토폴로지 발견 알고리즘)

  • Son Myunghee;Kim Byungchul;Lee Jaeyong
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.4 s.334
    • /
    • pp.7-14
    • /
    • 2005
  • Earlier researches have typically concentrated on discovering IP network topology, which implies that the connectivity of all Ethernet devices is ignored. But automatic discovery of Physical topology Plays a crucial role in enhancing the manageability of modem Metro Ethernet mesh networks due to the benefits of Ethernet services, including: Ease of use, Cost Effectiveness and flexibility. Because of proprietary solutions targeting specific product families and related algorithm which depends on Layer 2 forwarding table information it is impossible to discover physical topology in the Ethernet mesh networks. To cope with these shortcomings, in this paper we propose a novel and practical algorithmic solution that can discover accurate physical topology in the Ethernet mesh networks. Our algorithm divides the Ethernet mesh networks into bridged networks and host networks and those bridges located in boundary are named edge bridges. Our algorithm uses the standard spanning tree protocol MIB information for the bridged networks and uses the standard Layer 2 forwarding table MIB information for the host networks. As using the standard MIB information to discover physical topology we can offer interoperability guarantee in the Ethernet mesh networks composed of the various vendors' products.

A Simulation of Bridge using the Spanning Tree Protocol (스패닝 트리 프로토콜을 이용한 브릿지 시뮬레이션)

  • Lee, Sook-Young;Lee, Eun-Wha;Lee, Mee-Jeong;Chae, Ki-Joon;Choi, Kil-Young;Kang, Hun
    • Journal of the Korea Society for Simulation
    • /
    • v.6 no.2
    • /
    • pp.45-57
    • /
    • 1997
  • MAC (media access control) bridge is used to interconnect separate LANs and to relay frames between the BLANs (bridged LANs). Bridge architecture consists of MAC entity, MAC relay entity and bridge protocol entity protocol entity and performs learning, filtering and forwarding functions using filtering database. In this paper, we simulate these functions of bridge and the STP (spanning tree protocol). The STP derives an active topology from an arbitrarily connected BLAN. Our simulation model assumes a BLAN consisted of three bridge forming a closed loop. In order to remove the loop, each bridge process exchanges configruation BPDU (bridge protocol data unit0 with other bridge processes connected to the bridge itself. To simulate the communication between bridges, we implement the IPC (inter-process communication) server using message queues. Our simulation results show that the assumed BLAN contains no closed loop and then there is no alternative route and no unnecessary traffic.

  • PDF

Dynamic Routing and Priority-based Data Transmission Schemes in Avionic Ethernet for Improving Network QoS (항공전자 이더넷의 네트워크 성능 향상을 위한 동적 라우팅 기법 및 우선순위기반 데이터 전송 기법)

  • Lee, Won Jin;Kim, Yong Min
    • Journal of Advanced Navigation Technology
    • /
    • v.23 no.4
    • /
    • pp.302-308
    • /
    • 2019
  • Aircraft data network (ADN) is a data networking for signal transmission among avionic systems in aircraft, and it mostly has been applied MIL-STD-1553B that guarantees high reliability considering its application environments. However, commercial Ethernet has been widely applied for ADN recently, and its range of applications have increased. Ethernet provides high speed of data transmission, however, it could not guarantee quality of service (QoS) so high as MIL-STD-1553B. In this paper, we propose dynamic routing and priority based data transmission schemes in order to improve the QoS of legacy Ethernet. Our propose schemes can be applied to Ethernet switch, and it is able to manage network traffic efficiently, and reduce the time for data transmission. We analyze the packet transmission time for both legacy and proposed schemes in Ethernet environments using simulation, and we show that our proposed scheme can reduce the time for data transmission compare to legacy spanning tree protocol.

A Hyper Cube Spanning Tree Protocol for Smart Grid (스마트그리드를 위한 하이퍼큐브 스패닝 트리 프로토콜)

  • Piao, Wenjie;Joe, In-Whee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2011.04a
    • /
    • pp.572-575
    • /
    • 2011
  • It is well known that spanning tree protocol (STP) is the most commonly used protocol in switching networks for smart grid. STP selectively blocks redundancy links of the network to prevent layer 2 loops in network, and it also has a functionality of backing up links. As with the other protocols, STP has been updated with the continuing development of the network. STP is a broad concept and it does not just refer in particular to defined STP protocol in IEEE 802.1D standards, it refers to updated spanning tree protocol based on STP. Because of uneven distribution of communication traffic in root bridge, STP cannot satisfy fast converge nce while the failure occurs near the root bridge or on the root bridge in tree topologies of STP. In this paper, we propose a novel method --- Hyper Cube Spanning Tree Protocol (HCSTP) to solve uneven distribution of communication traffic. Theoretically, hyper cube in our protocol increases throughput and improves the utilization of communication. The simulation results show that HCSTP can achieve comparative and considerably higher performance than other STP protocols in terms of reconnection.