• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.351-356
• /
• 2011

본 연구에서는 국외 커튼월 내화 Code인 EN 13830, EN 13501-1, EN 1364-3을 사용하여 알루미늄과 스틸프레임에 대해 화재시 최적설계조건 도출을 위한 실험을 실시하였다. 현재 국내 커튼월의 내화 법규는 2008년 '내화 충전구조 세부 운영지침'에서 조인트 부분에 대해서만 내화규정이 정립되어 있다. 따라서 본 연구에서는 EN 13830과 그 하위법을 이용하여 알루미늄과 스틸 커튼월의 최적설계조건 도출을 위한 실험을 실시하였다. 실험 결과 차염성은 알루미늄 커튼월과 스틸 커튼월의 성능시간이 각각 10분 26분으로 약 16분의 차이가 발생하였고, 차열성은 알루미늄 커튼월과 스틸 커튼월이 최고온도에서 6분과 9분으로 약 3분정도의 차이를 보였고 평균온도에서는 9분, 24분으로 약 15분의 차이를 보였다. 그리고 복사열은 성능기준 $15Kw/m^2$를 통과하는데 알루미늄 커튼월은 16분 스틸 커튼월은 24분을 기록하였다.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.104-111
• /
• 2011

Aluminum has been widely used as frame materials in the curtain walls. Recently, use of steel as a curtain wall frame is being considered due to its higher strength and thermal resistance than aluminum. In this study, fire tests on the basis of EN 13830 were performed with aluminum and steel-aluminum hybrid curtain walls. From the tests, fire resistance integrity, thermal insulation, and radiation properties were evaluated for both systems and compared. According to the test results, the steel-aluminum hybrid curtain wall showed better fire-performance than the typical aluminum curtain wall for the fire resistance integrity and radiation properties. Although, the fire resistance performance for the insulation property was 6 min for both the two frames, the collapses were occurred at 36 min for the steel-aluminum hybrid curtain wall and at 13 min for the aluminum hybrid curtain wall.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.345-350
• /
• 2011

본 연구에서는 건축물의 초고층화와 대형화로 접목된 커튼월을 모델로 선정하여 알루미늄과 스틸 커튼월의 성능 비교를 위한 화재실험을 실시하였다. 화재실험은 $3m{\times}3m$ 규모의 알루미늄과 스틸 재질로 제작하여, 차염성, 차열성, 방열성, 변위, 커튼월 파괴를 측정하였다. 실험결과 알루미늄커튼월의 차염성은 12분, 차열성은 6분, 방열성은 26분을 기록하였고 스틸커튼월의 차염성은 10분, 차열성은 6분, 방열성은 14분을 기록하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.1
• /
• pp.12-17
• /
• 2021

• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.51-57
• /
• 2013

Metal curtain wall systems are widely used in high-rise commercial and residential buildings. While aluminum is the most frequent used frame material, steel framing is also reemerging as a high-performance material in glazed curtain walls due to less thermal conductivity and design flexibility. The purpose of this study is to evaluate thermal performance of a steel frame curtain wall system by comparing with a aluminum frame curtain wall system. The thermal transmittance was measured according to KS 2278, and condensation resistance was calculated by the test results according to KS F 2295. The steel framing test specimen showed lower thermal transmittance and temperature descending factor compared to the aluminum framing test specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.72-81
• /
• 2018

Fireproof structures using concrete, built-up panels and dry walls are usually used in walls inside fire compartments. However, demand for glass walls is emerging due to increase in interest in visibility and external appearance. In this study on steel fire resistance walls using insulation glass, fire resistance tests and performance evaluations were conducted on 60 minute fire resistance walls and exterior walls which could be applied to interior fire compartments and 90 minute fire resistance walls which could be applied to curtain walls. According to the tests, the specimens satisfied the required fire resistance performance. The finite element analysis was conducted after the tests to evaluate the fire resistance performance of the glass walls. The analysis results showed that the preliminary evaluation of fire resistance performance would be feasible.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.4-5
• /
• 2021

In irregular curtain walls, the nominal stress required for each member varies greatly depending on the shape, so it is inefficient to design members based on the maximum required stress. Then, built-up members are absolutely necessary, but built-up members manufactured by Manpower-welding cannot be constructed in an irregular curtain wall building because it' not precise. In order to address the problems, this paper presents why Robotic-laser-welding should be used in irregular curtain walls using Gwanggyo Galleria Department Store involving 3D printing as an example. Results verify the performance of Robot-Laser-Welding as an efficient solution for precise steel curtain wall members.