• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.199-208
• /
• 2011

The purpose of this study is to evaluate of the strength and deformation capacity of metallic dampers with the variable slit shape. For this purpose, 12 metallic damper specimens were prepared and shear testing was performed. According to the test results, the S shaped metallic damper with the strut height of 200mm and angle of $60^{\circ}$ shows better hysteretic performance than any other specimens. By making a comparison between the yield strength in test and the proposed strength formula, test results shows larger yield strength than calculation method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.254-262
• /
• 2011

The purpose of this study is the development of V shaped metallic damper, which is superior than slit damper in energy dissipation capacity. For this purpose, 9 metallic damper specimens were prepared and shear testing were performed. According to test results, the V shaped metallic damper with strut height of 270mm and strut angle of $60^{\circ}$ shows a better seismic performance than any other specimens. The result of comparison with the yield strength of the dampers using the existing strength formula shows that V type metal dampers were highly evaluated than others within analyzing existing experimental result.

• 유체기계공업학회:학술대회논문집
• /
• 1998.02a
• /
• pp.150-156
• /
• 1998

가스터어빈 트랜지션 덕트 내에서의 공기 역학적인 거동을 입구 스월각의 변화에 대하여 고찰하였다. 트렌지션 덕트가 작은 확산각(divergence angle)을 가지더라도 스트럿 영향으로 인한 탈설계점에서의 유동 패턴은 트랜지션 덕트 내에서의 유동특성을 더욱 악화시킨다. 시험범위의 스월각은 마하수 변화에 따라 손실계수에 큰 영향을 주지 못하였으며 트랜지션 덕트 내에서의 손실 정조는 만족할만 하나, 시험결과에 따르면 저압터빈의 노즐손실은 큰 입사각의 영향으로 커질것으로 생각되며, 또한 스트럿으로부터 떨어져 나오는 와류는 저압터빈의 로우터 블레이드의 진동에 악영향을 미칠 것으로 생각된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.24-40
• /
• 1997

Horseshoe vortices generated around the juncture between the ship and her appendages often lower a performance of the ship by increasing the appendage drag and making a non-uniform wake on the propeller plane. This paper investigates numerically how the fillet around the juncture of the leading edge influences the juncture flow and the appendage drag. Computation has been made by solving Navier-Stokes equations with MAC method and the flows are at the Reynolds number of 5,000. Five fillets with different height-breath ratios and curvatures are chosen as test models to find out the effects of the shape of fillets on the appendage drag and wake. Computational results show that fillets with a smaller height-breath ratio and/or with a concave curvature has smaller appendage drag and more uniform wake.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.123-130
• /
• 2010

The aim of this paper is a seismic performance evaluation of metallic damper devices which are efficient in workability and installation process. For this V shape and S shape dampers is considered. The strut figures of dampers are V shape and S shape and, the research parameters are strut height and angle of the dampers. ABAQUS program is used for nonlinear finite element analysis. The analysis is performed with the hysteretic curve that has maximum displacement with 50mm and has increased progressive. As a results of evaluating the yield strength, maximum strength and energy dissipation capacity of each device, V and S shape have a good strength capacity and the devices with strut angle $60^{\circ}$ and strut height 140 and 200mm are evaluated stable in seismic behaviors. The response of S shape is more efficient than that of V shape. In the yield strength estimation process, proposed formula can not estimate the yield strength of V and S shape dampers. Even though, the formula can not consider the variation of strut heights and strut angles. Finally the S shape damper is recommended in seismic performance than V shape damper.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.267-278
• /
• 2016

In this study, the ultimate strength of 335 simply supported reinforced concrete beams with shear span-to-effective depth ratio of less than 3 was evaluated by the ACI 318-14's strut-tie model approach implemented with the indeterminate strut-tie models and load distribution ratios of the companion paper. The ultimate strength of the beams was also estimated by using the experimental shear strength models, the theoretical shear strength models, and the current strut-tie model design codes. The validity of the proposed strut-tie models and load distribution ratios was examined by comparing the strength analysis results classified according to the prime design variables of the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.615-623
• /
• 2015

The previous strut-and-tie models (STMs) to evaluate the shear strength of squat shear walls with aspect ratio less than 2.0 do not consider the axial load transfer of concrete strut and individual shear transfer contribution of horizontal and vertical shear reinforcing bars in the web. To overcome the limitation of the existing models, a simple STM was established based on the crack band theory of concrete fracture mechanics. The equivalent effective width of concrete strut having a stress relief strip was determined from the neutral axis depth and effective factor of concrete strength. The shear transfer mechanism of shear reinforcement at the extended crack band zone was calculated from an internally statically indeterminate truss system. The shear transfer capacity of concrete strut and shear reinforcement was then driven using the energy equilibrium in the stress relief strip and crack band zone. The shear strength predictions of squat shear walls evaluated from the current models are in better agreement with 150 test results than those determined from STMs proposed by Siao and Hwang et al. Furthermore, the proposed STM gives consistent agreement with the observed trend of the shear strength of shear walls against different parameters.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.499-508
• /
• 2002

A simple design method for rib-reinforced seismic steel moment connections has been recently proposed based on the equivalent strut model. An experimental program was implemented to verify the proposed design method, as well as develop the schemes that will prevent cracking at the rib tip where stress concentration was evident. All specimens designed using the proposed method were able to develop a satisfactory connection plastic rotation of 0.04 radian. In addition to rib reinforcement, slight beam flange trimming pushed the plastic hinging and local buckling of the beam away from the rip tip and effectively reduced cracking potential at the rib tip. Using strain gage readings, the strut action of the rib and resulting reverse shear in the beam web were also experimentally identified.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.442-445
• /
• 2009

지진에 대한 건축물의 확률적 성능평가에 대해서는 지진하중에 대한 건축물의 손상확률 또는 파괴확률을 나타내는 지진취약도 함수를 작성하여 대상 건축물에 대한 지진위험도를 평가하는 방법을 이용하고 있으며 이에 대한 많은 연구가 이루어지고 있다. 본 연구에서는 지진하중과 구조물 재료특성의 불확실성을 고려하고 대상 건축물의 지진취약도 해석을 통하여 비내력벽의 유무에 따른 건축물의 지진거동 및 내진성능을 평가하였다. 비내력벽을 보편화된 모형화 방법인 등가의 대각 압축 스트럿으로 고려하여 비내력벽의 유무에 따른 저층 철근콘크리트 건축물을 모형화하였으며 지진하중의 강도는 유효최대지반가속도를 이용하여 각 건축물에 대하여 지진취약도를 작성하였다. 취약도해석 결과로 연약층을 가지고 있는 건축물의 경우는 손상확률이 골조만 있는 경우보다 크며 동일한 해석모델의 경우에도 해석방법에 따라서 취약도 곡선의 형태가 다름을 알 수 있었다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.27.3-27.3
• /
• 2009

인공위성이 발사체로부터 분리되면, 인공위성은 가장 먼저 태양 전지판을 전개한 후 전력을 생산한다. 전력은 인공위성의 운영에 반드시 필요하므로, 태양전지판의 성공적인 전개는 인공위성의 성공적 임무 수행의 필수 요소이다. 따라서, 태양전지판 또는 태양전지판의 전개장치 개발시에는 태양전지판이 이상없이 전개되는지를 확인할 수 있는 태양전지판 전개해석을 반드시 필요로 한다. 현재 개발중인 저궤도 지구관측위성의 경우, 3장의 태양전지판이 사용이 되며, 각 태양전지판의 전개 및 고정은 힌지 및 스트럿으로 이루어진 태양전지판 전개장치에 의하여 이루어진다. 이 논문에서는 다물체 동역학 해석프로그램인 Recurdyn을 이용하여, 상세 태양전지판 전개해석을 수행하고자 한다. 이전 연구에서는 기본적인 전개해석 모델을 수립하여, 태양전지판의 기본 전개거동을 확인할 수 있었다. 그러나, 태양전지판이 완전히 전개된 이후에 고정되는 부분의 모델링이 복잡하여, 단순하게 가정하여 전개해석을 수행하였다. 이러한 가정은 태양전지판의 전개 입장에서는 좀 더 극한상황이 되었으며, 이러한 환경하에서도 충분히 태양전지판이 잘 전개됨을 확인할 수 있었다. 이 논문에서는 간략화된 태양전지판 고정장치 및 기타 다른 부분들을 좀 더 상세모델링 하여, 전개 거동이 좀 더 실제에 가깝도록 하였다.